Flashforge Creator Pro Bedienungsanleitung

CREATOR PRO

SZ10-ZN/EN-A01

User Guide

This user guide is only applicable to FLASHFORGE Creator Pro 3D printer

Contents

Preface

Introduction

Notice

Chapter 1: 3D Printing Technology

Process

Make a 3D Model / Slice and Export the 3D Model / Build the 3D Model

Chapter 2: About Creator Pro

About Your Creator Pro

Views / Accessories / Terms / Parameters

Chapter 3: Unpacking

Chapter 4: Hardware Assembly

Chapter 5: Build Plate Leveling

Chapter 6: About Software

Software Installation

Software Acquisition / Software Installation and Start-up

Exploring FlashPrint

Chapter 7: Basic Printing

Generate a Gcode

Loading / Unloading the Filament Using LCD Panel

Chapter 8: Function

Chapter 9: Supports and Service

Preface

Note: Each device must be tested before leaving factory. If there are some residues in extruder

or some tiny scratches on the build tape, it is normal and won’t affect the printing quality.

On the completion of this User Guide, thanks all Flashforge engineers and the Flashforge 3D

printer users for their unremitting efforts and sincere assistance.

The Flashforge Creator Pro User Guide is designed for the Creator Pro users to start their printing

journey with Flashforge Creator Pro. Even if you are familiar with earlier Flashforge machines or

3D printing technology, we still recommend that you read through this guide, as there is lots of

important information about the Creator Pro for you to get a better 3D experience.

For a better and more successful printing experience, you can refer to the following materials:

(1) Quick Start Guide

Users will find the Quick Start Guide together with the printer accessories. The Quick Start Guide

will help you start your print journey as soon as possible.

(2) Official Flashforge Website: www.flashforge.com

The official Flashforge website contains the up-to-date information concerning Flashforge

software, firmware, device maintenance and so on. Users are also able to get the contact

information from there.

Please read Flashforge Creator Pro 3D Printer User Guide carefully before use.

Introduction

The Flashforge Creator Pro 3D Printer User Guide contains the information needed for you to

set up and use this device.

This User Guide includes the following parts: Preface, Introduction and after-sale service.

The Preface section includes resource acquisition channel, the overall framework of the

manual, and the problems that should be paid attention to.

The introduction section contains the presentation of 3D printing technology, equipment

introduction, unpacking and installation of equipment, software installation an usage.

After-sale section tells the user how to get the support and help.

Notice

Notices: Read all the instructions in the manual and familiarize yourself with the Flashforge Creator Pro

User Guide before setting-up and using. Failure to comply with the warning and instructions

may result in individual injury, fire, equipment damage or property damage.

PLEASE STRICTLY FOLLOW ALL THE SAFETY WARNINGS AND NOTICE BELOW ALL THE TIME.

Work Environment Safety

Keep your work place tidy.

Do not operate Creator Pro in the presence of flammable liquids, gases or dust.

Creator Pro should be placed out of children and untrained people’s reach.

Electricity Safety

Always use the Creator Pro with a properly grounded outlet. Do not refit Creator Pro plug.

Do not use Creator Pro in damp or wet locations. Do not expose Creator Pro to burning sun.

In case of device damage, please use the power supply provided by Flashforge.

Avoid using the device during an thunderstorm.

In case of uncertain accident, please unplug the device if you do not use it for long.

Personal Safety

Do not touch the nozzle and build plate during printing.

Do not touch the nozzle after finishing printing.

Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from

moving parts.

Do not operate the device while you are tired or under the influence of drugs, alcohol or medication.

Cautions

Do not leave the device unattended for long.

Do not make any modifications to the device.

To lower the build plate before loading/unloading filament. (The distance between the nozzle and

build plate should be kept for at least 50mm)

Operate the device in a well-ventilated environment.

Never use the device for illegal activities.

Never use the device to make any food storage vessels.

Never use the device to make any electrical appliance.

Never put the model into your mouth.

Do not remove the models with force.

Environment Requirements

Temperature: RT 15-30℃

Moisture: 20%-70%

Filament Requirements

Do not abuse the filament. Please make sure you use the Flashforge filament or the filament from the

brands accepted by Flashforge.

Filament Storage

All polymers degrade with time. Do not unpack until filament is needed. Filament should be stored in

clean and dry conditions.

Legal Notice

All the information in this document is subject to any amendment or change without the official

authorization from Flashforge.

FLASHFORGE CORPORATION MAKES NO WARRANTY OF ANY KIND WITH

REGARD TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRATIES OF MERCHANTA-

BILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Flashforge shall not be liable for errors contained herein for incidental consequential damages in

connection with furnishing, performance or use of this material.

This document contains proprietary information protected by copyright.

Chapter 1: 3D Printing Technology

3D printing refers to transforming three-dimensional models into physical objects that you can hold and

touch. It is also called additive manufacturing because the 3D model is created by “adding” layers upon

layers of material until the object is fully formed.

Fused Filament Fabrication(FFF) is the most common method of 3D printing. It is also the method that

the Creator Pro uses. It works by melting plastic material called filament onto a print surface in high

temperature. The filament solidifies after it cools down, which happens instantaneously after it is

extruded from the nozzle. 3D objects are formed with the filament laying down multiple layers.

1 . 1 Process

3D printing involves three steps:

1. Make or download a 3D model.

2. Slice and export the 3D model.

3. Build the 3D model.

1.1.1 Make a 3D Model

Currently, there are three ways of creating a 3D model.

Designing From Scratch: You can use free CAD (computer-aided design) software such as 3DTADA,

AutoCAD, SolidWorks, Pro-E, and our own software Happy 3D to design your

own 3D model.

3D Scanners: An alternative method to creating a 3D model is to scan an object. 3D scanners work by

digitizing a physical object, collecting its geometric data, and saving it to a file on your PC.

There are also apps that can turn a mobile device into a 3D scanner.

From the Cloud: The most popular way of obtaining a 3D model is to download it from websites that allow

users to upload 3D models that they designed.

E.g.: www.thingiverse.com

1.1.2 Slice and Export the 3D Model

Slice software is the software that prepares 3D models for printing and turns them into instructions for

the 3D printers. FlashPrint is the slicing software used for the FlashForge Creator Pro.

Using FlashPrint, you can prepare stl. files to be x3g files for printing. Then users can print files via SD card.

1.1.3 Build the 3D Model

Once the output file has been transferred to your Creator Pro, it will start to turn the 3D model into a

physical object by laying down layers of filament.

Chapter 2: About Creator Pro

2 . 1 About Your Creator Pro

2.1.1 Views

1. Z-Axis Guide Rod

14. Turbofan Baffle

22. Reset Button

8. SD Card Slot

23. USB Input

21. Power Switch

20. Power Input

3. Slot

7. Leveling Knob

5. Build Plate

9. LCD Panel 10. Buttons 12. Spring Presser

18. Filament Guide Tube Buckle 19. Spool Holder

2. Extruder Cable Bunch 4. Y-Axis Guide Rod

6. Build Platform

13. Turbofan

11. Cooling Fan

15. Left Nozzle

14 15

24. Spool Holder Slot

17. X-Axis Guide Rod

16. Right Nozzle

2.1.2 Accessories

Along with your Creator Pro 3D printer, the box also contains the followings:

SD CardPower Cable USB Cable

Filament Spool x 2 Lid After-sales Service Card

Filament Guide Tube x 2

Quick Start Guide

Do Not Touch 请勿触摸

CAUTION

注意 1.Extruder hot during operation.

使用过程中喷头会发热。

2.Heating plate hot during operation. Allow surface to cool before servicing.

使用过程中加热平台会发热，待平台表面冷却后再操作。顺时针旋转螺母

升高打印平台。

即减少平台与喷嘴之间

的距离。

逆时针旋转螺母

降低打印平台。

即增加平台与喷嘴之间

的距离。

调整平台支架下方的螺母，直至纸片在喷嘴与平台间的

运动感受到轻微的阻力。

打印平台调节专用

扫描二维码，观看调平指导视频！

Spool Holder x 2 Build Tape x 2 Leveling Card

Tool Bag

Tool bag:

(Allen Wrench X 2 / Leveling knob X 1 /

M3X8 Bolt X 2 / PTFE Tube X 2 / Grease X 1)

Extruder’s accessory kit:

(M3X8 BoltX2 / M3X6 Bolt / Turbofan baffle)

Extruder’s

Accessory Kit

User Guide

CR EATO R PR O

SZ10-ZN/EN-A01

User Guide

This user guide is only applicable to FLASHFORGE Creator Pro 3D printer

2.1.3 Terms

The surface on which the Creator Pro builds an object.

Build Plate

Build Tape

Build Volume

The blue tape that covers Creator Pro’s build plate so that the object can

adhere to the build plate well.

The three dimensional amount of space that an object will use once it is

completed. The largest build volume of Creator Pro is 227*148*150 mm.

Leveling Knobs Knobs under the build platform that are used for adjusting the distance

between the nozzle and build plate.

Extruder The device that draws the filament from the spool, melts it and pushes it

through a nozzle onto the build plate.

Nozzle Also called “print head”, which located at the bottom of the extruder where

heated filament is squeezed out.

Cooling Fan To cool the outer assembly of the extruder and gear motor.

Filament Intake An opening located at the top of the extruder.

Filament Guide Tube A plastic piece that guides the filament from the filament box to the filament

intake.

Glue Stick A solid adhesive used for making the model stick to the build plate firmly.

Unclogging Pin Tool A tool that used for cleaning the extruder.

Stamping Wrench A tool that used for seizing the nozzle's metal cube.

2.1.4 Parameters

Number of Extruder: 2

Print Technology: Fused Filament Fabrication(FFF)

Screen: LCD Panel

Build Volume: 227×148×150mm

Layer Resolution: 0.05 - 0.4mm

Build Precision: ±0.2mm

Positioning Precision: Z axis 0.0025mm;

XY axis 0.011mm

Filament Diameter: 1.75mm(±0.07)

Nozzle Diameter: 0.4mm

Build Speed: 10~200 mm/s

Software: FlashPrint

Support Formats: Input: 3MF/STL/OBG/FPP/PNG/

JPG/JPEG Output:X3G

OS: Win xp / Vista/7/8/10 / Mac OS / Linux

Device Size: 526*360*403(550)mm

NET Weight: 14.8Kg

AC Input: 100V-240V/4.5A-2.5A

Connectivity: USBCable, SD Card

Chapter 3: Unpacking

3 . 1 About Your Creator Pro

( Reference video: Creator Pro Unpacking )

The Creator Pro was carefully packaged at FLASHFORGE manufacturing facility. Please follow the

unpacking steps laid out below.

1. Handle the package and its contents with extra care; do not use

any unnecessary force.

CAUTION

2. Do not remove the wrapping around the nozzle. It consists of a

ceramic fiber fabric and heat resistant tape that helps to keep

the nozzle at a constant temperature.

1. Open box and remove top foam piece.

4. Remove the packing bag. And then

remove the tape and plastic wrap for

protecting the front door.

2. The foam should contain: two filament guide

tubes, one piece of build tape, one Flashforge

leveling card, one user guide and one Quick

Start Guide.

3. Firmly grasp the two side handles of

Flashforge Creator Pro. Lift it out from the

carton and place it on a stable surface.

Andere Handbücher für Creator Pro

Inhaltsverzeichnis

Andere Flashforge 3D-Drucker Handbücher

Flashforge

Flashforge DREAMER Bedienungsanleitung

Flashforge

Flashforge Adventurer 4 Pro Bedienungsanleitung

Flashforge

Flashforge Creator Pro Bedienungsanleitung

Flashforge

Flashforge Finder Bedienungsanleitung

Flashforge

Flashforge ADVENTURER 3 Bedienungsanleitung

Flashforge

Flashforge Creator Pro 2 Bedienungsanleitung

Flashforge

Flashforge Finder Bedienungsanleitung

Flashforge

Flashforge DREAMER Bedienungsanleitung

Flashforge

Flashforge Finder Bedienungsanleitung

Flashforge

Flashforge Finder Bedienungsanleitung

Flashforge

Flashforge Finder 3 Bedienungsanleitung

Flashforge

Flashforge Creator 3 Bedienungsanleitung

Flashforge

Flashforge Guider II Bedienungsanleitung

Flashforge

Flashforge Guider 3 Plus Bedienungsanleitung

Flashforge

Flashforge Adventurer 4 Bedienungsanleitung

Flashforge

Flashforge ADVENTURER 3 Bedienungsanleitung

Flashforge

Flashforge Guider Bedienungsanleitung

Flashforge

Flashforge THOR500T Bedienungsanleitung

Flashforge

Flashforge Finder Bedienungsanleitung

Flashforge

Flashforge Adventurer 3 Pro 2 Bedienungsanleitung

Flashforge

Flashforge AD1 Bedienungsanleitung

Flashforge

Flashforge Adventurer 5M Bedienungsanleitung

Flashforge

Flashforge Adventurer 4 Bedienungsanleitung

Flashforge

Flashforge Foto 13.3 Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch