Fluke Ii900 Kurzanleitung

Firmwa re Upgrade instr uctions for ii900 / ii910 Acoust ic Imagers –rev.1 –page 1

Internal

Upgrade instruction for Fluke ii900/ii910 units

Equipment

•A Windows-PC. The firmware file that will be provided needs to be copied to this PC.

•BP291 battery that comes with ii900 Series

•USB-C cable that comes with ii900 Series

Preparation for upgrading multiple units

•Use a BP291 battery that comes with the ii900 series battery (e.g. from one of the units) and

make sure it is charged to a level of 25%, or more.

•Use a USB-C cable (included with each ii900 Series) to connect Fluke ii900 series units to the USB

port of a PC

Upgrading units

•Open the packaging, take case out of the box and take unit out of the case.

•Open battery door, put battery in the unit, close battery door

•Power on the Fluke ii900/ii910. Note that it may take about 15…20 seconds before the unit

shows anything on screen.

•Connect the USB cable to the ii9x0 and to a USB-port of the PC

•On the PC, open Explorer and notice that a new device ‘FLK-ii900-Series’(or -ii910-) is now listed

in the list of drives and devices (see picture).

•Copy the new firmware file named (filename).SWU file from the PC

to the root folder (‘User Data’) of the Fluke ii9x0 Series imager.

•Once copied, the ii9x0 screen will show message, telling you that a

firmware update file is recognized, unit want to upgrade

•Tap ‘Yes’to confirm and start the firmware update. This may take a

few minutes (2 - 4 min. approx.)

•Once fully installed, a message will show on screen of the ii9x0,

telling you that the unit is about to restart

•Touch “OK” to activate the restart. The Fluke ii900 Series unit will

turn off and then on again. Like before, it may take over 15…20

seconds before the screen becomes active

•Verify that the new firmware has been loaded indeed: tap the screen, this will open a menu bar

at the left, tap Settings, tap ‘Imager Info’. This will open a screen showing Model, Serial Number,

and OS. This line should indicate the newly released firmware version (e.g: V4.6.168.x).

•Take off the grey cover that sits over the microphone array at the front of the imager

Firmwa re Upgrade instr uctions for ii900 / ii910 Acoust ic Imagers –rev.1 –page 2

Internal

•Check to see if the unit shows a

camera image as well as the sound

bar indicator, see image at the

right.

Sounds received from the

environment may result in colored

‘blobs’ on screen.

•If all is correct, turn off the unit by

pressing the ON/OFF key and

tapping ‘OK’

•Disconnect the USB-cable, place

back the mic array cover over the

mic array, take out the battery,

place back the battery cover and

lock it

•Place the battery pack and USB

cable back in the case if

appropriate. Please note: each ii900 and ii910 comes with 2 battery packs included,

either 2x Fluke BP291, or 2x RRC-2040-2, not mixed.

•Put instrument back in the case, put all accessories back in the carrying case and close the case

•Place case in the packaging, close the packaging

•If you’re handling multiple units: place a small tick-mark on the packaging box as a visual

indicator that this one has been through the upgrade, e.g. a dot on the box label using a marker

pen

Done!

Andere Handbücher für ii900

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fluke Laborausrüstung Handbücher

Fluke

Fluke Performance Series Bedienungsanleitung

Fluke

Fluke 983 Bedienungsanleitung

Fluke

Fluke TiS20+ Bedienungsanleitung

Fluke

Fluke Ti300U Bedienungsanleitung

Fluke

Fluke TiX500 Bedienungsanleitung

Fluke

Fluke PTI120-9HZ Bedienungsanleitung

Fluke

Fluke TIP900 Bedienungsanleitung

Fluke

Fluke TiS10 Bedienungsanleitung

Fluke

Fluke 7037 Bedienungsanleitung

Fluke

Fluke Ti200 Bedienungsanleitung

Fluke

Fluke ii900 Bedienungsanleitung

Fluke

Fluke Micro-Bath 7102 Bedienungsanleitung

Fluke

Fluke RSE600 Bedienungsanleitung

Fluke

Fluke RUSKA 7750i Bedienungsanleitung

Fluke

Fluke TiR4 Bedienungsanleitung

Fluke

Fluke Hart Scientific 7100 Bedienungsanleitung

Fluke

Fluke Ti450 PRO Bedienungsanleitung

Fluke

Fluke Expert Series Bedienungsanleitung

Fluke

Fluke 6050H Bedienungsanleitung

Fluke

Fluke Professional Series Bedienungsanleitung

Fluke

Fluke 7008 Bedienungsanleitung

Fluke

Fluke 3125 Bedienungsanleitung

Fluke

Fluke i40s-PR Bedienungsanleitung

Fluke

Fluke 9142 Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung

Fluke ii900 Kurzanleitung

Beliebte Laborausrüstung Handbücher anderer Marken