Fluke 1742 Konfigurationshandbuch

Manual Supplement

Manual Title: 1742/1746/1748 Users Supplement Issue: 2

Part Number: Web-Only Issue Date: 8/18

Print Date: October 2017 Page Count: 5

Revision/Date:

This supplement contains information

necessary to ensure the accuracy of

the above manual.

1742/1746/1748 Users Manual Supplement

8/18 1

Change #1, 562

On page 28, replace the Note with:

Note

Most power quality standards, such as EN 50160, 9,

GOST 33073 refer to IEC 61000-4-30 Class A

measurement methods that require Harmonic Sub-

Groups.

Under examples replace the first paragraph with:

Select Harmonic Components for measurements according to

standards that require the harmonics components measurement

according to IEC 61000-4-7, for example IEEE 519 or IEC 61000-3-12.

On page 52, under Environmental Specifications replace the

Operating Temperature with:

Operating…..-25 °C to +50 °C (-13 °F to +122 °F) warm up the Product to

-10 °C (14 °F) before you turn on power.

Change #2, 597

On page 12, replace the Measurement Line Power Source

section with:

Measurement Line Power Source:

XWWarning

To prevent injury, do not touch the metal parts of one test lead

when the other is still connected to hazardous voltage.

WCaution

To prevent damage to the Product, make sure the measured voltage

does not exceed the input rating of the power supply.

1. Attach the power supply to the Logger.

2. Move the slide-cover on the power supply to access the safety

sockets.

3. Connect the short test leads (see Figure 7B & 7C) with the

power supply inputs. Make sure to use the non-stackable plugs.

The test leads are rated for measurement/overvoltage CAT III

1000 V and CAT IV 600 V.

Manual Supplement 1742/1746/1748 Users

2 8/18

4. Connect the test leads with the voltage measurement inputs:

 Connect A/L1 with one input of the power supply.

 Connect N with the second input of the power supply.

 Connect A/L1 with one input of the power supply.

 Connect B/L2 with the second input of the power supply.

5. Use the short fan out of the Voltage Test Lead, 3-phase + N.

Plug the connector A/L1 into the socket A/L1 of the voltage

measurement inputs of the Logger. Repeat this with B/L2, C/L3

and N.

Manual Supplement 1742/1746/1748 Users

3 8/18

 For measurement connection to the Logger (see Figure

7A):

POWERQUALITYLOGGER

1746

POWER QUALITY LOGGER

1746



Figure 7A: Measurement connection to the Logger

1742/1746/1748 Users Manual Supplement

8/18 4

 To supply power to the Logger from installations with neutral

voltage (see Figure 7B):

POWERQUALITY LOGGER

1746

Figure 7B: Measurement with neutral voltage and supplying

instrument power. Note

On single-phase systems, use the set of 1.5 m test leads (item 8

in Figure 7).

6. Connect the voltage inputs to the test points.

The Logger automatically turns on and is ready to use in <30

seconds.

Manual Supplement 1742/1746/1748 Users

5 8/18

 To supply power to the Logger from installations without neutral

voltage (see Figure 7C):

POWERQUALITY LOGGER

1746

Figure 7C: Measurement without neutral voltage and supplying

instrument power.

Note

On single-phase systems, use the set of 1.5 m test leads (item 8

in Figure 7).

7. Connect the voltage inputs to the test points.

The Logger automatically turns on and is ready to use in <30

seconds.

Andere Handbücher für 1742

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fluke Messgerät Handbücher

Fluke

Fluke RUSKA 2482 Bedienungsanleitung

Fluke

Fluke 972A Bedienungsanleitung

Fluke

Fluke 724 Bedienungsanleitung

Fluke

Fluke i430-Flexi-TF-II Bedienungsanleitung

Fluke

Fluke CableAnalyzer DSX-5000 Bedienungsanleitung

Fluke

Fluke 80i-2010s Bedienungsanleitung

Fluke

Fluke 789 Gebrauchs- und Pflegehandbuch

Fluke

Fluke 1550 Bedienungsanleitung

Fluke

Fluke 96000 Series Bedienungsanleitung

Fluke

Fluke 481-DESI Bedienungsanleitung

Fluke

Fluke Victoreen 451P Bedienungsanleitung

Fluke

Fluke 374 Bedienungsanleitung

Fluke

Fluke 914 Series Bedienungsanleitung

Fluke

Fluke 3000 FC Bedienungsanleitung

Fluke

Fluke PLS 6R Bedienungsanleitung

Fluke

Fluke a3001 FC Bedienungsanleitung

Fluke

Fluke 635 Bedienungsanleitung

Fluke

Fluke 923 Bedienungsanleitung

Fluke

Fluke 80i-410 Bedienungsanleitung

Fluke

Fluke BT520 Konfigurationshandbuch

Fluke

Fluke 481-DESI Gebrauchsanweisung

Fluke

Fluke IDA-5 Bedienungsanleitung

Fluke

Fluke SigmaPace 1000 Bedienungsanleitung

Fluke

Fluke IRR1-SOL Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung