Fluke 902 Bedienungsanleitung
®
PN 2547887
May 2006 Rev. 1, 3/07
© 2006-2007 Fluke Corporation. All rights reserved. Printed in China.
All product names are trademarks of their respective companies.
902
HVAC Clamp Meter
Users Manual
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and
workmanship for three years from the date of purchase.
This warranty does not cover fuses, disposable batteries, or
damage from accident, neglect, misuse, alteration, con-
tamination, or abnormal conditions of operation or handling.
Resellers are not authorized to extend any other warranty
on Fluke’s behalf. To obtain service during the warranty
period, contact your nearest Fluke authorized service cen-
ter to obtain return authorization information, then send the
product to that Service Center with a description of the
problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS
NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES OR LOSSES,
ARISING FROM ANY CAUSE OR THEORY. Since some
states or countries do not allow the exclusion or limitation of
an implied warranty or of incidental or consequential dam-
ages, this limitation of liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99
i
Table of Contents
Title Page
Introduction....................................................... 1
Contacting Fluke .............................................. 2
Safety Information ............................................ 3
Symbols ........................................................... 5
Getting Acquainted with the Meter ................... 6
Using the Meter................................................ 10
AC and DC Voltage Measurement................. 10
Resistance and Continuity ............................. 11
Microamps µA Measurement ......................... 12
Temperature .................................................. 13
Capacitance................................................... 16
AC Current Measurement .............................. 16
Backlight ........................................................ 18
MIN MAX Recording Mode ............................ 18
Display HOLD ................................................ 19
Auto Off.......................................................... 19
Maintenance..................................................... 20
Cleaning the Meter......................................... 20
Battery Replacement ..................................... 21
Specifications ................................................... 23
Electrical Specifications ................................. 23
General Specifications ................................... 24
902
Users Manual
ii
iii
List of Tables
Table Title Page
1. 902 HVAC Clamp Meter Features.................... 7
2. Display Features .............................................. 9
List of Figures
Figure Title Page
1. 902 HVAC Clamp Meter Features.................... 6
2. Display Features .............................................. 8
3. Testing a Flame Rod ........................................ 13
4. Temperature Measurement.............................. 15
5. Proper AC Current Measurement..................... 17
6. Battery Replacement........................................ 22
902
Users Manual
iv
1
902
Introduction
The Fluke 902 is a hand-held battery-operated HVAC
Clamp Meter (“the Meter”) that measures:
•AC current
•DC current (up to 200 µA for flame rod testing)
•AC and DC voltages
•Capacitance
•Resistance
•Continuity
•Temperature in both Celsius (°C) and Fahrenheit (°F)
The Meter comes with:
•Two AA alkaline batteries (installed)
•Users Manual
•Soft carrying case
•TL75 Test Leads (one pair)
•80BK Integrated DMM Temperature Probe
902
Users Manual
2
Contacting Fluke
To contact Fluke, call one of the following telephone
numbers:
USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
Or visit Fluke’s Web site at: www.fluke.com.
Register the Meter at: http://register.fluke.com
HVAC Clamp Meter
Contacting Fluke
3
Safety Information
A “XW Warning” statement defines hazardous conditions
and actions that could cause bodily harm or death.
A “W Caution” statement identifies conditions and actions
that could damage the Meter or the equipment under test.
XWRead First: Safety Information
To ensure safe operation and service of the
Meter, follow these instructions:
•Read the Users Manual before use and
follow all safety instructions.
•Use the Meter only as specified in the
Users Manual; otherwise, the Meter's
safety features may be impaired.
•Avoid working alone so assistance can be
rendered.
•Never use the Meter on a circuit with
voltages higher than 600 V or a frequency
higher than 400 Hz fundamental. The Meter
may be damaged.
•Never measure ac current while the test
leads are inserted into the input jacks.
•Do not use the Meter or test leads if they
look damaged.
•Use extreme caution when working around
bare conductors or bus bars. Contact with
the conductor could result in electric
shock.
902
Users Manual
4
•Use caution when working with voltages
above 60 V dc or 30 V ac rms or 42 V ac
peak. Such voltages pose a shock hazard.
•Clean the case with a damp cloth and mild
detergent only. Do not use abrasives or
solvents.
•To avoid false readings that can lead to
electrical shock and injury, replace the
batteries as soon as the low battery
indicator (B) appears. As the Meter gets
to the point where the low batteries affect
the readings, the Meter locks and no
measurements can be made until the
batteries are changed.
•Do not hold the Meter anywhere beyond
the tactile barrier, see Figure 1.
•Adhere to local and national safety codes.
Individual protective equipment must be
used to prevent shock and arc blast injury
where hazardous live conductors are
exposed.
Andere Handbücher für 902
2
Inhaltsverzeichnis
Andere Fluke Messgerät Handbücher
Fluke
Fluke Datapaq Furnace Tracker Bedienungsanleitung
Fluke
Fluke 741B Bedienungsanleitung
Fluke
Fluke Victoreen 190 Bedienungsanleitung
Fluke
Fluke a3001 FC Gebrauchs- und Pflegehandbuch
Fluke
Fluke 80i-110s Bedienungsanleitung
Fluke
Fluke PRUFTECHNIK VIB 6.172 Programmierhandbuch
Fluke
Fluke 1773 Bedienungsanleitung
Fluke
Fluke RaySafe 452 Bedienungsanleitung
Fluke
Fluke 2620A Bedienungsanleitung
Fluke
Fluke 5790B Bedienungsanleitung
Fluke
Fluke 732C Konfigurationshandbuch
Fluke
Fluke ASM-990 Series Bedienungsanleitung
Fluke
Fluke IntelliTone Pro 200 LAN Bedienungsanleitung
Fluke
Fluke FOM Bedienungs- und Montageanleitung
Fluke
Fluke 971 Bedienungsanleitung
Fluke
Fluke 365 Bedienungsanleitung
Fluke
Fluke 9000A-006 Bedienungsanleitung
Fluke
Fluke 715 Bedienungsanleitung
Fluke
Fluke ProcessMeter 787 Gebrauchs- und Pflegehandbuch
Fluke
Fluke 930 Bedienungsanleitung
