Fluke 9040 Bedienungsanleitung
PN 2438546
April 2005, Rev.2, 5/11
© 2005-2011 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
9040
Phase Rotation Indicator
Users Manual
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct
.com
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for one year
from the date of purchase. This warranty does not cover fuses, disposable batteries,
or damage from accident, neglect, misuse, alteration, contamination, or abnormal
conditions of operation or handling. Resellers are not authorized to extend any other
warranty on Fluke’s behalf. To obtain service during the warranty period, contact your
nearest Fluke authorized service center to obtain return authorization information,
then send the product to that Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH
AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED.
FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSE-
QUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY.
Since some states or countries do not allow the exclusion or limitation of an implied
warranty or of incidental or consequential damages, this limitation of liability may not
apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct
.com
i
Table of Contents
Title Page
Introduction.......................................................................................................... 1
Contacting Fluke ................................................................................................. 1
Unpacking the 9040 ............................................................................................ 2
Safety Information ............................................................................................... 3
Symbols............................................................................................................... 5
Elements of the 9040 .......................................................................................... 6
Determine the Rotary Field Direction .................................................................. 7
Maintaining the 9040 ........................................................................................... 8
Replacing the Fuse (9040UK only) ..................................................................... 9
Specifications ...................................................................................................... 10
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct
.com
ii
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct
.com
1
9040
Introduction
The Fluke 9040 Phase Rotation Indicator (the 9040) is a handheld instrument designed to
detect the rotary field of three-phase systems.
How to Contact Fluke
To contact Fluke, call one of the following telephone numbers:
•Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
•Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
•Canada: 1-800-36-FLUKE (1-800-363-5853)
•Europe: +31 402-675-200
•Japan: +81-3-3434-0181
•Singapore: +65-738-5655
•Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To view, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals.
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct
.com
9040
Users Manual
2
Unpacking the 9040
The 9040 is available in three configurations. Depending on your purchase, the 9040 ships
with these items:
•9040
o3 self-retaining test probes, 1000 V CAT II
o3 alligator clips, 1000 V CAT III/600 V CAT IV
oUsers Manual
•9040UK
o3 fused test probes, 1000 V CAT III
o3 alligator clips, 1000 V CAT III/600 V CAT IV
oUsers Manual
•9040EUR
o3 Slim-Reach™ test probes (black) 1000 V CAT III/600 V CAT IV
o3 self-retaining test probes, 1000 V CAT II
o3 alligator clips, 1000 V CAT III/600 V CAT IV
oUsers Manual
XW Warning
To prevent possible electrical shock, fire, or personal injury, do not exceed
the Measurement Category (CAT) rating of the lowest rated individual
component of a product, probe, or accessory.
If an item is damaged or missing, contact the place of purchase immediately.
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct
.com
Phase Rotation Indicator
Safety Information
3
Safety Information
Caution identifies conditions and actions that may damage the 9040.
Warning identifies conditions and actions that pose hazard(s) to the user.
XW Warning
To prevent possible electrical shock, fire, or personal injury:
•Carefully read all instructions.
•Comply with local and national safety codes. Use personal protective
equipment (approved rubber gloves, face protection, and flame-
resistant clothes) to prevent shock and arc blast injury where
hazardous live conductors are exposed.
•Use the product only as specified, or the protection supplied by the
product can be compromised.
•Do not work alone.
•Do not use test leads if they are damaged. Examine the test leads for
damaged insulation or exposed metal. Check test lead continuity.
•Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.
•Keep fingers behind the finger guards on the probes.
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct
.com
9040
Users Manual
4
•Measurements can be adversely affected by impedances of additional
operating circuits connected in parallel or by transient currents.
•Verify operation prior to measuring hazardous voltages (voltages above
30 V ac rms, 42 V ac peak and 60 V dc).
•Do not use the 9040 with any of the parts removed.
•Do not use the product around explosive gas, vapor, or in damp or wet
environments.
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct
.com
Phase Rotation Indicator
Symbols
5
Symbols
The following symbols appear on the 9040 or in this manual.
Table 1. Symbols
WRisk of Danger. Important
information. See manual. JEarth ground.
XHazardous voltage. Risk of
electric shock. TDouble Insulated.
PConforms to requirements of
European Union. )Conforms to relevant Canadian
Standards Association directives.
CAT II
CAT II equipment is designed to protect against transients from energy-consuming
equipment supplied from the fixed installation, such as TVs, PCs, portable tools,
and other household appliances.
CAT III
CAT III equipment is designed to protect against transients in equipment in fixed-
equipment installations, such as distribution panels, feeders and short branch circuits,
and lighting systems in large buildings.
CAT IV CAT IV equipment is designed to protect against transients from the primary supply
level, such as an electricity meter or an overhead or underground utility service.
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct
.com
9040
Users Manual
6
Elements of the 9040
Indicators, buttons, and jacks are shown in Figure 1.
Test lead input jack
L1, L2, L3 Indicators
Clockwise Rotation LCD Indicator
Counter-Clockwise Rotation LCD Indicator
Brief Instructions on instrument rear
bbx02f.eps
Figure 1. The 9040 Phase Rotation Indicator
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct
.com
Andere Handbücher für 9040
3
Inhaltsverzeichnis
Andere Fluke Messgerät Handbücher
Fluke
Fluke 772 Gebrauchs- und Pflegehandbuch
Fluke
Fluke MultiFiber Pro Bedienungsanleitung
Fluke
Fluke 9190A Bedienungsanleitung
Fluke
Fluke 3000 FC Bedienungsanleitung
Fluke
Fluke 16 Gebrauchs- und Pflegehandbuch
Fluke
Fluke endurance series Bedienungsanleitung
Fluke
Fluke 805 Bedienungsanleitung
Fluke
Fluke 7 Series Bedienungsanleitung
Fluke
Fluke 9142 Bedienungsanleitung
Fluke
Fluke 416D Bedienungsanleitung
Fluke
Fluke 1735 Konfigurationshandbuch
Fluke
Fluke CertiFiber Pro Bedienungsanleitung
Fluke
Fluke DTX Series Bedienungsanleitung
Fluke
Fluke Victoreen 190 Bedienungsanleitung
Fluke
Fluke 93 Bedienungsanleitung
Fluke
Fluke 1587 FC Gebrauchs- und Pflegehandbuch
Fluke
Fluke 55XXA/COIL 50 Bedienungsanleitung
Fluke
Fluke i1000s Referenzhandbuch
Fluke
Fluke i310s Bedienungsanleitung
Fluke
Fluke 87V Ex Gebrauchs- und Pflegehandbuch
