Fluke 9040 Betriebsanleitung

Supplement

Title: 9040 Users Supplement Issue: 3

Part Number: 2438546 Issue Date: 11/21

Print Date: April 2005 Page Count: 8

Revision/Date: 2, 5/11

This supplement contains information necessary to ensure the accuracy

of the above Instruction Sheet.

9040 Users Manual Supplement

11/21 1

Change #1, 65800

On page 5, add the following to the Symbols table:

ÃConforms to relevant South Korean EMC Standards.

Change #2, 448, 506

On page 3, add the following Warnings:

•Read all safety information before you use the Product.

•Use this Product indoors only.

•Use only current probes, test leads, and adapters supplied

with the Product.

•Do not use the Product above its rated frequency.

•Do not apply more than the rated voltage, between the

terminals or between each terminal and earth ground.

Manual Supplement 9040 Users

2 11/21

•Do not keep the Product in operation and unattended at high

temperatures.

On page 8, add the following Warning:

XWWarning

To prevent possible electrical shock, fire, or personal injury, do

not operate the Product with covers removed or the case open.

Hazardous voltage exposure is possible.

9040 Users Manual Supplement

11/21 3

On page 5, add the following to the Symbols table:

»Consult user documentation.

On page 5, replace the CAT II, CAT III and CAT IV in the

Symbols table with:

¼

Measurement Category II is applicable to test and

measuring circuits connected directly to utilization points

(socket outlets and similar points) of the low-voltage

MAINS installation.

½

Measurement Category III is applicable to test and

measuring circuits connected to the distribution part of

the building’s low-voltage MAINS installation

¾

Measurement Category IV is applicable to test and

measuring circuits connected at the source of the

building’s low-voltage MAINS installation

Manual Supplement 9040 Users

4 11/21

On page 10, replace the entire page of Specifications, with:

Specifications

Maximum voltage between any Terminal and Earth Ground: 600 V

Power: Supplied by circuit under test.

Fuse: (9040 UK model only) 0.5 A, 1000 V, 50 kA, 6.3 mm x 32 mm

Determine Rotary Field Direction:

Nominal Voltage: 40 to 690 V ac (Ume)

Frequency Range (fn): 15 to 400 Hz

Current Pickup: 1 mA

Nominal Test Current (in each phase): 1 mA

Temperature:

Operating -10 °C to +40 °C

Storage -40 °C to +60 °C

Operating Relative Humidity: 15 % to 80 %

Altitude:

Operating ≤2000 m

Storage ≤2000 m

Size: 12.4 cm x 6.1 cm x 2.7 cm

9040 Users Manual Supplement

11/21 5

Weight: 200 g

Safety:

IEC 61010-1: Pollution Degree 2

IEC 61010-2-030: Measurement CAT III 600 V/CAT IV 300 V

IEC 60925: IP40 (non-operating)

IEC 61557-7: Phase sequence

Electromagnetic Compatibility:

International: IEC 61326-1: Industrial Electromagnetic Environment

CISPR 11: Group 1, Class A

Group 1: Equipment has intentionally generated and/or uses

conductively-coupled radio frequency energy that is necessary for

the internal function of the equipment itself.

Class A: Equipment is suitable for use in all establishments other

than domestic and those directly connected to a low-voltage power

supply network that supplies buildings used for domestic purposes.

There may be potential difficulties in ensuring electromagnetic

compatibility in other environments due to conducted and radiated

disturbances.

Manual Supplement 9040 Users

6 11/21

Caution: This equipment is not intended for use in residential

environments and may not provide adequate protection to radio

reception in such environments.

Emissions that exceed the levels required by CISPR 11 can occur

when the equipment is connected to a test object.

The equipment may not meet the immunity requirements of this

standard when test leads and/or test probes are connected.

Korea (KCC):Class A Equipment (Industrial Broadcasting &

Communication Equipment)

Class A: Equipment meets requirements for industrial

electromagnetic wave equipment and the seller or user should take

notice of it. This equipment is intended for use in business

environments and not to be used in homes.

USA (FCC): 47 CFR 15 subpart B. This product is considered an

exempt device per clause 15.103.

9040 Users Manual Supplement

11/21 7

Change #3, A212

On page 7, in the Determine the Rotary Field Direction:

Delete step 3.

Andere Handbücher für 9040

Inhaltsverzeichnis

Andere Fluke Prüfgeräte Handbücher

Fluke

Fluke P5515-V Bedienungsanleitung

Fluke

Fluke OMNIScanner 2 Bedienungsanleitung

Fluke

Fluke 5520A Service Bedienungsanleitung

Fluke

Fluke T6-600 Bedienungsanleitung

Fluke

Fluke 9640A Series Bedienungsanleitung

Fluke

Fluke A40B Bedienungsanleitung

Fluke

Fluke i6000s Flex-24 Bedienungsanleitung

Fluke

Fluke i400s Bedienungsanleitung

Fluke

Fluke 712 Bedienungsanleitung

Fluke

Fluke 714 Bedienungsanleitung

Fluke

Fluke TL1000-MC4 Originalbetriebsanleitung

Fluke

Fluke Express 3 Bedienungsanleitung

Fluke

Fluke 5440B/AF Bedienungsanleitung

Fluke

Fluke AIRCHECK Gebrauchsanweisung

Fluke

Fluke 707Ex Bedienungsanleitung

Fluke

Fluke T+ Bedienungsanleitung

Fluke

Fluke P3100 Series Bedienungsanleitung

Fluke

Fluke 753 Gebrauchs- und Pflegehandbuch

Fluke

Fluke 74X Series Gebrauchs- und Pflegehandbuch

Fluke

Fluke 718 Series Betriebsanleitung

Fluke

Fluke Series II Bedienungsanleitung

Fluke

Fluke 368 FC Referenzhandbuch

Fluke

Fluke T3 Gebrauchs- und Pflegehandbuch

Fluke

Fluke CertiFiber Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung