Flycam FLCM-FLN-PLA Bedienungsanleitung

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Flowline Placid 2-Axis Stabilizing Arm (FLCM-FLN-PLA)

Assembly Manua l

Tensioner Spring

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright

statutes or in wring by the Publisher.

Safety Shock Cord

Remove the hook from Flowline support

bar.

Take the cord bundle out from the cup and

pull the whole cord unl a cord lock comes

out.

Flowline Placid Setup

Separate the cord from cord lock and keep

the lock aside for aaching it back

aerwards.

Separate the cord also from the cup and

keep aside for mounng it back later.

Use a tool to unscrew small bolts that hold

the front pulley, from each side.

Mount front pulley in between the cord,

and pull the cord so that it goes back inside

the support arm. Again use tools to ghten

the bolts from each side and set the pulley

at its posion.

Turn the Placid Arm upside down. By using

an allen key, loosen the mounng bracket of

Arm. Now the bracket has enough space for

the cord to pass through it.

Insert cord into the mounng bracket. Make

sure that it is going exactly in the centre, up

into the hole of the Placid arm. Then Pull

the cord from boom of Placid arm, near

the spring, while sll holding it upside

down.

To x Placid arm at its appropriate posion,

aach one side of Safety Elasc Cord to a

knob on Placid arm. Then, drag the other

side of elasc cord across Flowline support

arm, and aach to the knob on other side

of Placid arm.

Now you can hold the Placid arm in its

standard posion. The cord is aptly set to

perform its funcon. By using an allen key,

ghten the mounng bracket of Placid Arm

with Flowline support arm.

Pull out the front pulley carefully, so it

doesn’t drop into the Flowline support bar

and Insert the cord from the bottom hole

and take it out from the top hole.

Fix the hook back at its actual posion, using

an allen key. Now Set the provided Spring

again in the hook.

Wear support jacket and ghten the buckles

provided at the waist, adjust as per your

convenience. Tighten the buckles provided

at the chest of support jacket, and adjust as

per your convenience.

By adjusng side support, you will move the

weight on your hips, thus resulng in

comfortable long hour shoong.

Loosen the knob of hook and aach camera

to it. Tighten with provided knob to ensure

slip-free connecon.

Put-in the cup back through the cord and

relock it with the cord lock. Roll the leover

cord inside the cup.

Install Flycam Flowline Placid and change the Spring, Follow this

https://bit.ly/3Ae0t7a

YOUR FLOWLINE PLACID 2-AXIS STABILIZING ARM

ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

Warranty: We oer one year warranty for our products from date of purchase. Within this period of

me, we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor

does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to

inspecon and evaluaon by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling in

transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.

utmost support and care unl you use our product.

Inhaltsverzeichnis

Andere Flycam Kamerazubehör Handbücher

Flycam

Flycam FLCM-EDGE-V1 Bedienungsanleitung

Flycam

Flycam Yoko Steady Stabilizer Support Bedienungsanleitung

Flycam

Flycam FLCM-FLN-MSTR-02 Bedienungsanleitung

Flycam

Flycam Flowline Master Bedienungsanleitung

Flycam

Flycam Galaxy Stabilizer Arm & Vest Bedienungsanleitung

Flycam

Flycam DSLR-NANO-QR-BL Bedienungsanleitung

Flycam

Flycam Vista-II Stabilizing Arm& Vest Bedienungsanleitung

Flycam

Flycam FLCM-FLN Bedienungsanleitung

Flycam

Flycam GL-020-00 Bedienungsanleitung

Flycam

Flycam FLCM-GA Bedienungsanleitung

Flycam

Flycam FLCM-5000-Q Bedienungsanleitung

Flycam

Flycam Swivel Bedienungsanleitung

Flycam

Flycam FLCM-NANO-QR Bedienungsanleitung

Flycam

Flycam Vista-I Bedienungsanleitung

Flycam

Flycam Flowline Master Bedienungsanleitung

Flycam

Flycam Flowline B-FLCM-FLN-FM Bedienungsanleitung

Flycam

Flycam FLCM-FLN-UMH-01 Bedienungsanleitung

Flycam

Flycam FLOWLINE 600N Bedienungsanleitung

Flycam

Flycam Flycam 5000 FLCM-5000-Q Bedienungsanleitung

Flycam

Flycam FLCM-PLA-EA Bedienungsanleitung

Flycam

Flycam FLCM-FLN-PA Bedienungsanleitung

Flycam

Flycam FLCM-FLN-CH Bedienungsanleitung

Flycam

Flycam FLCM-BP Bedienungsanleitung

Flycam

Flycam FLCM-FLN-PA Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Pentax

Pentax Data Back Fc Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Olympus

Olympus PT-EP05L Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung