Fortis FSTNRELTPLB Bedienungsanleitung
Table of Contents
Safety Notice....................................................................................................................................................2
Exploded View & Parts List.........................................................................................................................3
Assembly............................................................................................................................................................5
Preparation...................................................................................................................................................5
Assembly nstruction................................................................................................................................5
Exercise nstructions.....................................................................................................................................9
Warm Up Phase.........................................................................................................................................9
The Exercise Phase...................................................................................................................................9
Warm Down Phase...................................................................................................................................9
Muscle Toning...........................................................................................................................................10
Weight Loss...............................................................................................................................................10
Usage Tip....................................................................................................................................................10
Exercise Monitor............................................................................................................................................10
Specifications............................................................................................................................................10
Operation Procedures............................................................................................................................10
1
Please read these instructions carefully before using the product.
Safety Notice
Note the following precautions before assembling or operating the unit:
•Assemble the unit exactly as shown in this instruction manual.
•Check all screws, nuts and other connections before using the unit for the first
time, and ensure that the unit is in a safe, working order before each use.
•Set the unit up in a dry level location, away from moisture or water.
•Place a suitable base (eg. rubber mat, wooden board etc.) beneath the unit to
avoid dirt and scuff marks.
•Before training on this unit, remove all objects from a 2 meter radius around the
unit.
•Do not use aggressive cleaning articles or detergents to clean the unit. Remove
any sweat from the unit immediately with a soft dry towel.
•Your health can be affected by incorrect or excessive training. Consult with your
doctor prior to beginning a new training program. Your doctor will be able to
give advice in regards to the maximum settings and targets (pulse rate, duration
of training etc..) to which you may train yourself, and get precise information
during training.
•This unit is not suitable for therapeutic purposes.
•Only train on the unit when it is working as designed. f any parts of the unit
malfunction or break, contact the Kogan.com customer support team for further
information.
•This unit can only be used for one person to train at a time.
•Wear training clothes and suitable shoes at all times. Training shoes are
recommended.
•f you start to feel dizzy, sick or experience any other abnormal symptoms,
please stop training immediately and consult with your doctor immediately.
•Children should only ever use the unit under the direct supervision of an adult
who is experienced in the use of the product and is able to offer advice and aid.
•The resistance of the unit is fully adjustable. The unit is equipped with an
adjustable resistance knob, that can be turned towards stage 1 for less resistance,
or turned towards stage 8 for more resistance.
•The maximum weight for a user of this unit is 100kgs.
Care must always be taken when lifting or moving this unit. Take care to not injure your
back.
Always use proper lifting techniques and/or have someone assist you.
2
Exploded View & Parts List
3
No. Description QTY No. Description QTY
1 Computer 1 31 Sensor Wire 1
2 Bolt M5 x 50 2 32 Arc Washer D8 x 20 x R30 x 2⌀8
3 End Cap 25⌀2 33 Bolt M8 x 16 4
4 Middle Handlebar 1 34 Front Stabilizer 1
5 Screw ST4.2 x 19 2 35 Bolt M8 x 70 4
6 Pulse Monitor 2 36 End Cap 60⌀2
7 Spring Washer D8 4 37 End Cap 60⌀2
8 Bolt M8 x 30 2 38 Rear Stabilizer 1
9 Small Cover 1 39 Tension Wire 1
10 Foam Grip 2 40 Sensor Wire 1
11 Handlebar (L/R) 2 41 Main Frame 1
12 End Cap 2 42 - -
13 Foam Grip 2 43 - -
14 End Cap S13 6 44 Hex Head Bolt M8 x 75 2
15 Nut M8 4 45 Washer D8 x 16 x 1.5⌀6
16 Bolt M8 x 40 4 46 Pedal Tube 2
17 Bushing 32 x 19 x 2⌀ ⌀ 8 47 Pedal 2
18 Washer D8 x 32 x 2⌀2 48 Bolt M8 x 45 4
19 Bolt M8 x 20 2 49 Bushing 14 x 12.5 x 10.1⌀ ⌀ 4
20 Lower Handlebar (L/R) 2 50 Square End Cap J60 x 30 x 1.5 4
21 Arc Washer D8 x 16 x R19 x 2 4 51 End Cap S17 4
22 Nylon Nut M8 6 52 Bolt M10 x 55 2
23 Bushing 32 x 14 x 20⌀ ⌀ 4 53 Washer D10 x 20 x 2⌀2
24 Bushing 14 x 8.5 x 60⌀ ⌀ 2 54 Nylon Nut M10 4
25 Bushing 32 x 19 x 59⌀ ⌀ 2 55 Washer D10 x 32 x 2⌀2
26 Arc Washer D8 x 16 x 1⌀1 56 Bracket 2
27 Bolt M5 x 27 1 57 Bushing 32 x 19 x 26⌀2
28 Tension Control 1 Allen Wrench S6 1
29 Upright Post 1 Cross Wrench S13-14-15 1
30 Sensor Wire 2 Open-end Wrench S17-19 1
4
ssembly
Preparation
Before assembly, make sure that you have enough clear space around you.
Use the supplied tools for assembly.
Before assembly, please check that all parts listed on the previous page are present. f
any parts are missing, please contact the Kogan.com customer support team.
ssembly Instruction
Step One
Attach the front stabilizer (34) and the
rear stabilizer (38) to the main frame (41)
with the carriage bolt (35) and an arc
washer (32)
Step Two
Connect the Sensor Wire (31) to (40), and
the Tension Control Wire (28) to (39) as
shown to left. Fix the upright post (29) to
the main frame (41) with a bolt (33) and
arc washer (32).
Note: Do not tighten the bolt (33) or arc
washer (32) until after the next step.
5
Step Three
nsert the bushing (25) into the upright post
(29). Fix the lower handlebars (20L/R) to the
upright post (29) with the bolt (19), spring
washer (7) and washer (18).
Step Four
Fix the Pedal Tubes (46) to the lower
handlebars (20L/R) with bolts (44) and
nylon nuts (22).
Step Five
Fix the Pedal Tubes (46) with the Pedal Crank
with the Pedal Hinge Bolts (52), Washers (53)
and Nylon Nuts (54).
6
Step Six
nstall the pedals (47) onto the pedal
tubes (46) with hex head bolts (48),
washers (45) and nylon nuts (22).
Step Seven
Fix the handlebars (11L/R) to the lower handle
bars (20L/R) with bolts (16), arc washers (21)
and domed nuts (15).
Step Eight
Attach the middle handle bar (4) to the
upright post (29) as shown. nsert and
tighten the bolt (8), the handle bar plastic
cover (9) and the arc washer (7).
7
Step Nine
Attach the end cap (14) and (51).
Step Ten
Connect the handle pulse wire, then
connect the sensor wire (31) to the
computer (1).
Attach the computer (1) onto the upright
post (29) with a screw (2).
C UTION: Make sure you have tightened all of the bolts and nuts well before
beginning your workout.
NOTE: The end cap on the front stabilizer tube is movable. This will ensure it is easy
for you to move your training bike.
8
Exercise Instructions
Using your elliptical bike provides you with several benefits. t will improve your
physical fitness, tone your muscles and can assist with weight loss when paired with a
calorie controlled diet.
Warm Up Phase
This stage helps get the blood flowing around the body, and gets the muscles moving
and working properly. t will also reduce the risk of cramp and muscle injury. t is
advisable to do a few stretching exercises as shown below. Each stretch should be held
for approximately 30 seconds. Do not force or jerk your muscles into a stretch – if it
hurts, STOP.
The Exercise Phase
This is the stage where you put the effort
in. After regular use, the muscles in your
legs will become stronger. You should
work hard, however it is important to
maintain a steady tempo throughout.
The rate of work should be sufficient to
raise your heart beat into the target zone
as shown to right.
Warm Down Phase
This stage should last for a minimum of 12 minutes, though most people start at about
15-20 minutes.
Repeat the warm up exercises, reducing your temp for approximately 5 minutes. The
stretching exercises should now be repeated, again remembering not to force or jerk
your muscles into the stretch.
As you get fitter, you may need to train longer and harder. t is advisable to train at
least three times a wekk, and if possible, space the workouts evenly throughout the
week.
9
Andere Fortis Ellipsentrainer Handbücher
Beliebte Ellipsentrainer Handbücher anderer Marken
Weslo
Weslo Momentum 4.0 Elliptical Bedienungs- und Wartungshandbuch
Progear Fitness
Progear Fitness Air elliptical pro 1307 Bedienungsanleitung
Torque Fitness
Torque Fitness XPLLP Bedienungsanleitung
Octane Fitness
Octane Fitness PRO3700C Bedienungsanleitung
Xterra
Xterra FS5.8e Bedienungsanleitung
Bodyguard
Bodyguard E-40 Bedienungsanleitung
Bonn Germany
Bonn Germany Concept 2.2 Bedienungsanleitung
Precor
Precor Resolute RSL 620 Bedienungsanleitung
NordicTrack
NordicTrack E 9.2 Elliptical Bedienungsanleitung
Vision Fitness
Vision Fitness X6600iNetTV Bedienungsanleitung
Matrix
Matrix MX-A5x Bedienungsanleitung
SportsArt Fitness
SportsArt Fitness ECO-NATURAL Elite E874 Bedienungsanleitung
