Foxconn CMC181 Bedienungsanleitung
UHF Reader User Manual
1 Quick Guide
1.1 Product introduction
CMC181 is a high-performance UHF RFID reader, with complete proprietary intellect al property rights, s pporting
DRM (Dense Reader Mode) , excellent network stability ,especially s it for enterprise scale batch gro p application,
can be widely applied to vario s RFID application systems s ch as SCM, Access control, anti-fake and shop floor
control system and so on.
Application:
Vehicle management
C stoms clearance management
Storage and logistics management
Access control system
Shop floor control
Asset management
Features
：
：：
：
Compliant with the EPC Class1 Gen2 (ISO18000-6C) ；
High scanning speed, p to 750 tags/s;
Extra scanning range, p to 12 m (adj stable, vary with antenna);
4 a to switch antenna ports can s pport 4 antennas in se sim ltaneo sly;
High reliability, al min m o t case, for the harsh work condition.
Specifications
：
：：
：
Specifications
Protocol ISO18000（EPC Class1 Gen2）
Operating Freq ency
US:902MHz～928MHz (standard)
E rope:865MHz～868MHz
China:920MHz～928MHz
Working mode FHSS or fixed freq ency with software settings
O tp t power 5dBm～30dBm (1dBm step by software)
RF interface Fo r TNC interfaces
Comm nication
interface RJ45
IO 2 ways relay o tp t, 1 photoelectric isolated inp ts
Reading distance Maxim m p to 12M
Writing distance Maxim m p to 3M
Maxim m length of
EPC Maxim m p to 496 bits
Indicating lamp Power, inventory and fo r antennas
Power adapter 12V/3A
Power cons mption Maxim m p to 13W
Physical
parameters
size 222mm*158.5mm*33.7mm
weight 1.094kg
Shell material Al min m alloy
Environmental
parameters
Working temperat re -20℃～+50℃
Storage temperat re -40℃～+85℃
Storage h midity 5%～95% no condensation
1.2 Function description for UHF reader ：
：：
：
T e top view for UHF reader
：
：：
：
T e side view for UHF reader
：
：：
：
1.3 T e definition of IO port：
：：
：
Symbol Function
+12V +12V power o tp t
D02+
2 ways o tp t circ it
D02-
D01+
D01-
DI+ 1 way inp t circ it
DI-
GND Power GND
Icon show
：
：：
：
1. The fixed screw holes
2. Ant port
3. Power lamp
4. Ant lamp
5. Inventory lamp
6.
Icon show
：
：：
：
1. J45
2. I/O port
3. Power switch
4. Power interface
12V-OUT
J11
CON8
1
2
3
4
5
6
7
8
DO2+
DI1+
DO2-
DI1-
DO1-
DO1+
1
1
1
1
2
3
4 5
1 2 3 4
1.4 Product size（
（（
（mm）
））
）
1.5 Standard fittings
Item Q antity
Remark
Mainframe 1 UHF reader
Reticle 1 Standard line, 2M for standard
Terminal 1 8 pin,3.96mm space between pins, green
Power adapter
1 DC 12V/3A
1.6 Attention
1. Use standard power adapter of 12V/ 3A;
2. Non a thorized person shall not change eq ipment, decompose and assembly, otherwise, it will cancel the
warranty period;
3. Don’t p t the eq ipment storage or installed in direct s nlight, high h midity, dew and other heat so rce place;
4. The cable’s length between ant and UHF reader sho ld not exceed 10 meters. When the length is longer than
two meters, yo ’d better se RF cable of low loss, or affecting the reading distance;
5. Electronic tag’s read-write distance is related to the gain of the antenna size, the angle between the tag and the
antenna size, the labels on items related to s ch factors as the medi m and the s rro nding environment. So in practical
application , please according to the site conditions to select the best match.
2 T e Demo of use
System frame for UHF reader
：
：：
：
A whole RFID system consists of UHF reader, antenna and tag. The host sends reading and writing command to
UHF reader thro gh RJ45 interface. After receiving command, UHF reader sends a specific freq ency electromagnetic
wave to space by the antenna. When the tag goes into the magnetic field, the energy obtained from tag’s internal
antenna will drive the tag circ it, whose internal information is sent. The UHF reader will accept and send the
information to the host. The system frame’s sketch map is shown in fig re 2.0:
Fig re2.0 system frame map
2.1 Presenter
Name Specs Amo nt
UHF reader 222mm*158.5mm*33.7mm 1
Reticle Standard cable 1
Circ larly polarized
antenna 225mm*225mm*39mm 1
Tag UHF some
PC ／ 1
Power adapter DC 12V/3A 1
2.2 T e software instructions on PC ：
：：
：
2.2.1 Working in TCP/IP mode
1. Connect one side of the electric s pply with 12V power adapter, the other side of 12V power adapter
connected with UHF reader. Connect cable of antenna with UHF reader, connected with PC by reticle. Then
open power switch of UHF reader and PC.
Electric
supply
12Vpowera
dapter
UHF reader
Ant
FID
tag
PC
TCP/IP
F
Cable
2. Do ble click “UHF Demo” on PC shown in fig re 2.1, and yo will go into fig re 2.2.
Fig re 2.1
Fig re 2.2
Icon s ow:
Search: get devices’ IP
Open: connect the device
Close: disconnect the device
Refresh: refresh the interface of the device
Same line while Different antennas: add co nt
Inventory Test: no add co nt, easy to long distant operation
Language setting
：
：：
：
English/
traditional Chinese
Inventory display
Data display
3. In Fig re 2.2 ,select“ TCP/IP” and then click “search”, yo will see Fig re 2.3.
Fig re 2.3
Icon s ow
Set Config: set device’s network parameters
Get Config: get device’s network parameters
Config: fill in network parameters incl ding in IP, Mask and Gateway.
4. Click “OK” to get all UHF reader devices .Yo choose every device by clicking the MAC ,then click “Get Config” to
gain device’s network parameters .After getting device’s network parameters ,yo can fill in what yo want to
set ,then click “Set Config”.
And click “open” to connect network, if s ccess, UHF reader will show yo “Init OK” and firmware
version .UHF reader will a tomatically search corresponding ant port .see in Fig re 2.4.
Fig re 2.4
1）
））
） Inventory
a. Pander data display option .Yo can select appropriate option, s ch as yo ’d better pander “M ltiple lines
while different antennas” with m lti-ant ports.
b. Make UHF tags dead against the center of the antenna.
c. Click “Inventory” and “Inv Once”. Show yo in Fig re 2.5.
d. Click “Stop” to complete inventory.
Fig re 2.5
2) Tag Operation
Click “Tag Access”, yo will see Fig re 2.6.
Fig re 2.6
Icon s ow:
Password : defa lt is 00 00 00 00;
Bank : tag bank memory incl ding RESERVED、EPC、TID、USER ;
Begin : the start address is word pointer (16-bit nit);
Length : length is word length of EPC;
Data : data to write;
Read : read special tag memory;
Write : write data to special tag memory;
Opcode : set option mode.
Block : set tag password;
Lock : lock tag;
Kill password ; kill tag password. It cannot be set “00 00 00 00”;
Kill : after logo t，tag cannot recover ;
Read Tag
Set corresponding parameters of tag memory bank, make tag dead against ant, and click ” Read” to get tag
information. If
Reading s cceeds, yo will see “Read tag OK” in fig re2.7.
Fig re 2.7
Write tag
Set corresponding parameters of tag memory bank, make tag dead against ant, edit data to write, and click “Write”. If
it is
s ccessf l, yo will see “Write Tag OK” in fig re 2.8.
Fig re 2.8
Lock Tag
Set password of tags to lock, select corresponding operation and password, click “Lock”. If it is s ccessf l, yo will see
“Lock Tag
OK” in fig re 2.9.
Fig re 2.9
Logo t Tag Operation: firstly set password of tags to kill, the password cannot be “00 00 00 00” .Click “Kill”and yo will
see “Kill Tag OK” in fig re 2.10.
Fig re 2.10
2）
））
） set device parameters
Click “Config” in fig re 2.11.
Fig re 2.11
3) Icon s ow
Ant: set the ant port
Dwell Time (ms): set exec tive time of ants
Power (dBm): set o tp t power which arranges 0 from 30.
SWR>2: check this option for ant SWR >2, do not perform the reverse power detection f nction.
Update: pdate parameters.
Inhaltsverzeichnis
