Franke AQCT0073 Bedienungsanleitung

Installation and operating instructions Istruzioni per il montaggio e l’uso

Notice de montage et de mise en service Montage- en bedrijfsinstructies

Instrucciones de montaje y uso

ZMI_001_2030020453-AQCT0073_#SALL_#AQU_#V2.fm / 25.03.19

EA-Nr.: 7612982219108

FAR-Best.-Nr.: 2030020453

AQCT0073

EA-Nr.: 7612982219139

FAR-Best.-Nr.: 2030020457

AQCT0076

Inhaltsverzeichnis35_01.fm

- 2 -

......................................................................................3

Please refer to the graphics in the German Installation and

Operating Instructions.

......................................................................................20

Les graphiques sont disponibles dans la notice de montage et de

mise en service allemande.

......................................................................................37

Por favor, consulte los gráficos en las instrucciones alemanas de

montaje y uso.

......................................................................................54

Per le grafiche fare riferimento alle Istruzioni per il montaggio e

l’uso in tedesco.

......................................................................................71

De tekeningen kunt u in de Duitse montage- en bedrijfsinst-

ructies vinden.

- 3 -

ZMI_001_2030020453-AQCT0073_#SEN_#AQU_#V2.fm

0English

AQUACONTACT - shower panel made of

mineral composite with a 6 V DC thermostat

AQCT0073

AQCT0076 .................with integrated tray for shower gel

Please refer to the graphics in the German Installation and Operating Instructions.

0Table of contents

1. Abbreviations and units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2. Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4. Important notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Description of product

5. Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

6. Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

7. Properties of MIRANIT-S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

8. Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

9. Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

10. Installation example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

11. Spray pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Assembly, function and commissioning

12. Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

13. Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

14. Thermal disinfection -manual- . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

15. Thermal disinfection -automatic- . . . . . . . . . . . . . . . . . . . . . . . . . 10

16. Setting the scald protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

17. Setting Flow Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

18. Setting Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

19. Hygiene Flush. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

20. Adjusting the cleaning switch-off . . . . . . . . . . . . . . . . . . . . . . . . . 13

21. Setting the jet angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

ZMI_001_2030020453-AQCT0073_#SEN_#AQU_#V2.fm

- 4 -

Maintenance

22. Maintenance and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

23. Maintenance information for MIRANIT-S . . . . . . . . . . . . . . . . . . . 14

24. Cleaning the shower head faceplate . . . . . . . . . . . . . . . . . . . . . . 15

25. Replacing the filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

26. Replacing the solenoid valve cartridge. . . . . . . . . . . . . . . . . . . . . 15

27. Replace the thermal element . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

28. Replacing the flow rate regulator . . . . . . . . . . . . . . . . . . . . . . . . . 16

29. Replacing the non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 17

30. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

31. Spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

1. Abbreviations and units

2. Key

Warning!

Failure to observe can result in bodily injury or even death.

Caution!

Failure to observe can result in material damage.

☞Important!

Failure to observe can cause the product to malfunction.

☞Useful information for optimum handling of the product.

DN Nominal diameter in mm

RCD Residual current protective device,

Earth leakage circuit breaker

SELV Safety extra low voltage

EA-Nr. European article number

FAR-Best.-Nr. Franke Aquarotter order number

Conversion 1 mm = 0.03937 inches

1 inch = 25.4 mm

All length specifications in the graphics are in mm.

- 5 -

ZMI_001_2030020453-AQCT0073_#SEN_#AQU_#V2.fm

3. Warranty

Liability is accepted in accordance with the General Terms and Conditions of

Business and Supply.

Use only genuine spare parts!

4. Important notes

• Installation, commissioning and maintenance must be performed only by a

qualified expert in accordance with the instructions provided, legal requirements

and recognised engineering standards.

• All technical connection regulations specified by the local water and electricity

supply companies must be observed.

• The battery compartment with battery or power supply with extension cable must

be ordered separately (see Accessories, Chapter 31).

• The power supply should be switched off before any work is carried out.

• We reserve the right to make changes.

5. Application

AQUACONTACT - a shower panel made of MIRANIT-S solid-surface material for

wall mounting with electronic timer, for battery or mains power, with a DN 15

thermostat battery. For connection to hot and cold water supply.

30 second flow time.

With a device for an optional bypass solenoid valve cartridge for carrying out thermal

disinfection, with the option of manual thermal disinfection.

With integrated hygiene flush (24h after last actuation, for 10s). Functions which can

be activated via reflection code on sensor: Activation/deactivation of hygiene flush

and cleaning switch-off (3 min.).

Additional functions via optional remote control

– Setting the flow and interval times

– Switch from time control to body reflection, maximum flow time of 300 seconds

– Program-controlled thermal disinfection with safety switch-off

ZMI_001_2030020453-AQCT0073_#SEN_#AQU_#V2.fm

- 6 -

6. Technical specifications

7. Properties of MIRANIT-S

MIRANIT-S resin-bound mineral material is a mixture of aluminium trihydrate,

natural stone, high quality unsaturated polyester resin and colour pigments.

MIRANIT-S ensures high stability and breaking resistance.

The smooth, non-porous and semi gloss surface is very easy to clean and fulfils the

most stringent hygiene requirements.

8. Scope of delivery

Minimum flow pressure: 1.0 bar

Recommended flow

pressure: 1-5 bar

Maximum operating

pressure: 10 bar

Calculated flow rate: 0.15 l/s 0.15 l/s

Volumetric flow:

Fitting: 0.15 l/s at a flow pressure of 3 bar

Bypass: 0.06 l/s at a flow pressure of 3 bar

Flow duration: 30 s

Operating voltage: 6 V DC

Power consumption: 1.5 W

Protection class: IP 67

Quantity Name

1 Shower panel with:

thermostat, AQUACONTACT sensor, solenoid valve cartridge,

lockable water volume regulators, connection pipes and AQUAJET-

Comfort shower head with integrated 0.15 l/s flow rate regulator

2 Connection bracket

1 Suspension rail

1 0.10 l/s flow rate regulator

1 0.20 l/s flow rate regulator

1 Locking ring

3 Screws, wall plugs

1 Installation and operating instructions

- 7 -

ZMI_001_2030020453-AQCT0073_#SEN_#AQU_#V2.fm

9. Dimensions

10. Installation example

11. Spray pattern

12. Assembly

Warning!

Only operate the fitting with non-return valves and the specified filters.

Failure to observe this instruction can result in an increased germ load in the

drinking water and thus pose a health or mortality risk.

Warning!

• Operate the product only with safety extra low voltage (SELV). The components

must not be earthed.

• Secure the mains power supply with a residual current circuit breaker (RCD).

Failure to observe this instruction can result in death or material damage due to

electric shock or fire, for example.

☞Important!

Prior to the assembly process, flush the pipework in accordance with DIN 1988.

☞To protect the tiles, use masking tape when marking and drilling. Drill at low speed.

☞Depending on the composition of the wall, special wall plugs may have to be used

(to be provided by the customer).

Fig. A: Water connection from above

Fig. B: Water connection from the rear

12.1

Only for water connection from the rear: Install the connection bracket (b) leak-tight.

12.2

Screw in the water volume regulators (a) leak-tight.

12.3

Align the water volume regulators so that the locking screw and operating element

are freely accessible.

12.4

For a shower head height of 2.10 m to 2.30 m, mark drill holes for installation at a

height (c) of 2.12 m to 2.32 m from the top of the finished floor.

12.5

Drill holes in accordance with these markings.

12.6

Insert the wall plugs.

12.7

Screw on the suspension rail.

12.8

Suspend the shower panel.

12.9

Mark the remaining drill hole.

ZMI_001_2030020453-AQCT0073_#SEN_#AQU_#V2.fm

- 8 -

12.10

Remove the shower panel.

12.11

Drill hole in accordance with the marking.

12.12

Insert the wall plug

☞The battery compartment or power supply and extension cable are not part of the

scope of delivery (see Accessories, Chapter 31).

☞If you are using a wall-mounted power supply unit, it must be installed around 3 m

away from the shower.

12.13

Connect the AQUACONTACT sensor (f) with

– a battery compartment (d)

or– a wall-mounted power supply unit (e).

☞If the battery charge state is low, the LED flashes in a 20s cycle.

12.14

Only for water connection from the rear: Prioritise work steps 12.16 to 12.18.

12.15

Mount the shower panel on the suspension rail and screw tight.

12.16

Establish the water connections.

12.17

Open the water volume regulators using an Allen key.

g: closed

h: open

12.18

Check the water connections for leaks.

13. Function

☞You can switch between time control and body reflection using the remote control

(not in the scope of delivery; see Accessories, Chapter 31)

Time control

Trigger the flow of water

13.1

Hold your hand near the sensor.

• The water will flow.

• The water flow will stop automatically

– once the preset flow time expires

or– after approaching the sensor once again.

☞The flow duration is factory-set to 30 seconds.

- 9 -

ZMI_001_2030020453-AQCT0073_#SEN_#AQU_#V2.fm

Body reflection

Trigger the flow of water

13.2

Hold your hand near the sensor.

• The water will flow.

• The water flow will stop automatically

– once the preset flow time expires

or– after approaching the sensor once again

or– after leaving the sensor range.

Temperature selection

14. Thermal disinfection -manual-

This shower fitting offers thermal disinfection to reduce the risk of a legionella

infection.

The thermal disinfection process is triggered by overturning the thermostat.

Warning!

Personal protective measures (scald protection) must be implemented for the

duration of the thermal disinfection. This might include cordoning off the shower

facilities.

Failure to observe this instruction can result in injuries due to scalding.

The operator is responsible for the execution, monitoring, and logging (room,

tapping point, date, time, temperature and duration).

The manufacturer does not accept any liability for claims by third parties relating to

the improper execution of thermal disinfection on the part of the operator.

The thermostat fitting has been prepared to carry out a thermal disinfection process

when the thermostat is overturned. The thermostat fitting can be manually thermally

disinfected (flushed with water at a temperature of > 70 °C) by unlocking the covered

stop on the temperature selector.

14.1

A shower pipe (e.g. HT pipe, di= 100 mm) should be placed under the shower head

to deflect the hot water to avoid scalding during the thermal disinfection process.

14.2

Turn the temperature selector (a) to the hot water stop.

14.3

Use the Allen key to push in the stop.

14.4

Turn the temperature selector (a) in an anti-clockwise direction up to the stop.

14.5

Trigger the fitting.

14.6

Measure the hot water temperature.

ZMI_001_2030020453-AQCT0073_#SEN_#AQU_#V2.fm

- 10 -

14.7

If the hot water temperature is > 70°C, the fitting should be flushed for at least

3 minutes. Trigger the fitting several times for this purpose.

☞The thermal disinfection process must be recorded (room, tapping point, date, time,

temperature, duration).

14.8

Turn the temperature selector (a) clockwise until it engages.

Caution!

The temperature selector (a) may not be turned beyond the stop in an anti-

clockwise direction.

14.9

Test the limit stop.

14.10

Trigger the fitting to drain the remaining hot water.

14.11

Measure the water temperature. The maximum water temperature may not exceed

40°C (see Chapter 16.).

☞Once thermal disinfection has been completed, the scald protector does not need to

be reset.

15. Thermal disinfection -automatic-

This fitting offers thermal disinfection to reduce the risk of a legionella infection.

Caution!

The directions in the Thermal Disinfection Planning Aid (01805618) must be

adhered to.

Warning!

Personal protective measures (scald protection) must be implemented for the

duration of the thermal disinfection. This might include cordoning off the shower

facilities.

Failure to observe this instruction can result in injuries due to scalding.

The operator is responsible for the execution, monitoring, and logging (room,

tapping point, date, time, temperature and duration).

The manufacturer does not accept any liability for claims by third parties relating to

the improper execution of thermal disinfection on the part of the operator.

☞At the factory, the thermal disinfection function is set so that the fitting cools down for

1 minute after a 5 minute application time.

☞Thermal disinfection can only be triggered using the remote control.

You can adjust the thermal disinfection parameters using the remote control (not

part of the scope of delivery, see Chapter 29.).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Franke Sanitärprodukte Handbücher

Franke

Franke AQMXS0002 Bedienungsanleitung

Franke

Franke F4LT1003 Bedienungsanleitung

Franke

Franke F3ET1001 Bedienungsanleitung

Franke

Franke F3SV1005 Bedienungsanleitung

Franke

Franke AQCT0031 Bedienungsanleitung

Franke

Franke F4LT1011 Bedienungsanleitung

Franke

Franke FLUENCE FF3200 Bedienungsanleitung

Franke

Franke FF2200 Series Bedienungsanleitung

Franke

Franke HDTX810L 7612979000252 Bedienungsanleitung

Franke

Franke PESCARA FFP4400 Bedienungsanleitung

Franke

Franke AQCT0005 Bedienungsanleitung

Franke

Franke F5ET2007 Bedienungsanleitung

Franke

Franke F3 Series Bedienungsanleitung

Franke

Franke F5 Series Bedienungsanleitung

Franke

Franke ORBIT Handbuch

Franke

Franke PROTRONIC-C AQRE130 Bedienungsanleitung

Franke

Franke F5LT2018 Bedienungsanleitung

Franke

Franke SIRIUS SIRW759 Bedienungsanleitung

Franke

Franke F5 Series Bedienungsanleitung

Franke

Franke AQUA750 Bedienungsanleitung

Franke

Franke SIRIUS SIRW771 Bedienungsanleitung

Franke

Franke AQUA213 7612982080364 Bedienungsanleitung

Franke

Franke FFP 1000 Series Bedienungsanleitung

Franke

Franke 7612982001864 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema