Freescale Semiconductor Logic Zoom ColdFire LITE Series Bedienungsanleitung

developed by

Zoom

™

ColdFire Development Kit

ColdFire LITEKIT QuickStart Guide

Zoom™ ColdFire Lite Development Kit QuickStart Guide Logic PN: 1000331

REVISION HISTORY

REV EDITOR REVISION DESCRIPTION APPROVAL DATE

Eric Harnisch

James Wicks Pilot Release JAW 8/31/04

Nathan Kro

James Wicks Corrected ‘Section 5: Jumper/ Switch Table’ ELH 4/11/05

Please check www.logicpd.com for the latest revision of this manual, product change notifications, and

additional application notes.

This file contains source code, ideas, techniques, and information (the Information) which are Proprietary and Confidential

Information of Logic Product Development, Inc. This information may not be used by or disclosed to any third party except under

written license, and shall be subject to the limitations prescribed under license.

No warranties of any nature are extended by this document. Any product and related material disclosed herein are only furnished

pursuant and subject to the terms and conditions of a duly executed license or agreement to purchase or lease equipments. The

only warranties made by Logic Product Development, if any, with respect to the products described in this document are set forth in

such license or agreement. Logic Product Development cannot accept any financial or other responsibility that may be the result of

your use of the information in this document or software material, including direct, indirect, special or consequential damages.

Logic Product Development may have patents, patent applications, trademarks, copyrights, or other intellectual property rights

covering the subject matter in this document. Except as expressly provided in any written agreement from Logic Product

Development, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other

intellectual property.

The information contained herein is subject to change without notice. Revisions may be issued to advise of such changes and/or

additions.

Zoom ColdFire Lite QuickStart Guide i

Table of Contents

1Introduction .......................................................................................................................................... 1

1.1 Zoom ColdFire LITE Development Kit Features ............................................................................1

2Getting Started ..................................................................................................................................... 2

2.1 Unpacking the System.................................................................................................................... 2

2.2 CD-ROM Contents.......................................................................................................................... 3

2.3 Development PC Requirements .....................................................................................................3

2.4 Mini ITX Lite Baseboard Connection Diagram ............................................................................... 4

2.5 P&E Shielded BDM Interface Connection Diagram ....................................................................... 5

3QuickStart............................................................................................................................................. 6

3.1 Inserting the Fire Engine into the Mini-ITX Lite Baseboard............................................................ 6

3.2 Connecting the Mini-ITX Lite Baseboard to your PC...................................................................... 7

3.3 Power Supply.................................................................................................................................. 7

4Test Drive the Zoom ColdFire LITE Development Kit ...................................................................... 8

4.1 Terminal Emulation Installation ...................................................................................................... 8

4.2 Power-up the Development Kit....................................................................................................... 8

4.2.1 dBUG ROM Monitor Power-up................................................................................................ 9

4.2.2 LogicLoader (bootloader/monitor) Power-up........................................................................... 9

4.3 Using the Development Kit with the P&E ColdFire LITE BDM Interface...................................... 10

4.3.1 Using the BDM with the GNU Cross Development Toolchain .............................................. 10

4.4 Sample Application....................................................................................................................... 12

5Jumper/Switch Table ......................................................................................................................... 13

6Product Notices ................................................................................................................................. 14

7Product Registration ......................................................................................................................... 14

8Ordering Information ......................................................................................................................... 15

8.1 Zoom ColdFire LITE Development Kits ........................................................................................ 15

8.2 Fire Engine Configurations ........................................................................................................... 15

8.3 Zoom ColdFire LITE Display Kits .................................................................................................15

9Support ............................................................................................................................................... 16

9.1 Frequently Asked Questions ........................................................................................................ 16

9.2 Technical Discussion Group......................................................................................................... 16

10 Zoom Display Kits.............................................................................................................................. 17

10.1 Zoom Display Kits Specification Table ......................................................................................... 17

11 Fire Engine CPLD Important Notice................................................................................................. 18

12 Troubleshooting................................................................................................................................. 19

13 Warranty Statement ........................................................................................................................... 19

Zoom ColdFire QuickStart Guide

Congratulations on your purchase of the ZoomColdFire LITE Development Kit. The Zoom

ColdFire LITE Development Kit provides a product-ready software and hardware platform for

evaluating the functionality of the ColdFire LITE processor and Fire Engine. This results in an

embedded product development cycle with less time, less cost, less risk… more innovation.

1 Introduction

1.1 Zoom ColdFire LITE Development Kit Features

Common Features

Fire Engine Included (64MB DDR, 4MB Boot Flash)

PC Card Expansion One PCI 2.2 slot (32 Bit, 33 or 66MHz, 3.3V)

Serial Ports One 115.2kbps RS-232 serial ports; Two TTL serial ports

Can 2.0b One port (MCF5485 only)

USB USB 2.0 One High speed device (on Fire Engine)

SPI

RTC

Network Support One RJ45 Ethernet jack connectors (application/debug)

Cables

Serial cable (null modem)

5 volt power supply with power adapters

Ethernet Crossover

Parallel Extension Cable (for BDM interface)

BDM Interface

Software

LogicLoader™ (bootloader/monitor)

Freescale dBUG ROM Monitor

Third party development tools and software wrapped in individual CDs

Cygwin and GNU Cross Development Toolchain

Mechanical Mini-ITX

6.7” (170mm) long x 6.7” (170mm) wide x 1.3” (33mm) high

* Third Party Software available from Freescale

Zoom ColdFire Lite QuickStart Guide 1

2 Getting Started

2.1 Unpacking the System

The Zoom ColdFire LITE Development Kit is comprised of the following items:

■Mini-ITX LITE Baseboard

■Fire Engine

■CD ROM (See CD ROM Contents Section)

■Serial Cable

■BDM Interface

■Ethernet crossover cable

■Parallel extension cable

■5 volt power supply with power adapters (US, UK, EUR, and Japan)

■Warranty Card

■QuickStart Guide

■Packing List

■Third party development tools and software wrapped in individual CDs

Note: Avoid touching the MOS devices. Static discharge can and will damage these devices.

Once you have verified that all the items are present, remove the board from its protective jacket

and anti-static bag. Check the board for any visible damage and ensure that there are no broken,

damaged, or missing parts.

Figure 2.1 – Kit Contents

Zoom ColdFire QuickStart Guide

2.2 CD-ROM Contents

Product Documentation

Fire Engine and Zoom ColdFire LITE Development Kit product briefs

Bill of Materials (.pdf format) for Fire Engine and Mini-ITX LITE Baseboard

Schematics (.pdf format) for Fire Engine and Mini-ITX LITE Baseboard

MCF547x/MCF548x Fire Engine Hardware Specification

MCF547x/MCF548x Fire Engine CPLD Specification, see section 11

Zoom ColdFire LITE User’s Manual

Fire Engine Design Guideline Application Note

Zoom ColdFire LITE Development Kit QuickStart Guide

LogicLoaderUser’s Manual

Software Development Tools

Tera-Term serial emulation program

Cygwin and GNU Cross Development Toolchain

Sample applications

References, Resources, and Support

Freescale Technical Information Center (TIC) www.freescale.com

Logic FAQ, Technical Discussion Group

Support Packages

Product Registration & Downloads

2.3 Development PC Requirements

General

Pentiumprocessor or equivalent

64 MB RAM minimum

1 Gigabyte free hard disk space

115200 baud capable RS-232 port (COM port)

Tera Term serial emulation program (or equivalent)

Zoom ColdFire Lite QuickStart Guide 3

2.4 Mini ITX Lite Baseboard Connection Diagram

Figure 2.2 – Connection Diagram for the ITX Baseboard

Connection Diagram Details:

1. CAN Port

2. Serial Port

3. Ethernet Ports

•Ethernet Port 1 (top in this image)

•Ethernet Port 0 (bottom in this image)

4. ATX Power Connector

5. 5V Power In -- use appropriate power adaptor

6. System Reset Button

7. PCI Connector

8. Power On LED

Important Note: The ITX baseboard is a common assembly board for all ColdFire LITE Development Kits and may

contain peripheral connectors that are not supported by the Fire Engine purchased.

Zoom ColdFire QuickStart Guide

2.5 P&E Shielded BDM Interface Connection Diagram

Please ensure that your P&E Shielded BDM Interface is properly connected.

Figure 2.3 – P&E Shielded BDM Interface Properly Connected to the Fire Engine

Zoom ColdFire Lite QuickStart Guide 5

3 QuickStart

3.1 Inserting the Fire Engine into the Mini-ITX Lite Baseboard

Insert the Fire Engine into the Hirose connectors on the Mini-ITX Lite Baseboard.

1) Position the Fire Engine’s four white 100 pin Hirose connectors directly above the four mating

Hirose connectors on the ITX Baseboard (see picture below).

2) Firmly press the Fire Engine downward on each connector until it is fully seated.

3) Verify that the Hirose connectors on the Fire Engine and Mini-ITX Baseboard have mated

correctly. To remove the Fire Engine, carefully pull upwards on any chosen corner of the Fire

Engine until one of the Hirose connectors on the baseboard releases. Repeat this motion

until all four Hirose connectors are no longer mated to the ITX Baseboard and remove.

Figure 3.1 – Inserting the Fire Engine into the Mini- ITX Lite Baseboard

Zoom ColdFire QuickStart Guide

3.2 Connecting the Mini-ITX Lite Baseboard to your PC

Figure 3.2 – Connecting the Mini ITX Lite Baseboard to your PC

1. Connect the null-modem serial cable (supplied in the kit) to the serial port connector on the

baseboard and to a COM port on the Host PC.

2. Connect the regulated 5V power supply to the appropriate power adapter. Plug the power

adapter into the power outlet and the 5V line output connector into the power connector on the

baseboard.

3.3 Power Supply

The Fire Engine is equipped with 2 options for providing power:

■2.1 mm barrel connector with a positive center tap

■Standard ATX power supply receptacle

Note: Do not connect more than one power supply at a time. The use of some PCI expansion

cards may require a separate ATX power supply due to power requirements of the card. See

Mini-ITX Lite Hardware Specification for power supply rating

Zoom ColdFire Lite QuickStart Guide 7

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Freescale Semiconductor Mikrocontroller Handbücher

Freescale Semiconductor

Freescale Semiconductor MCF51CN128 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MPC5634M Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor FRDM-KL05Z Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor M68HC08RG Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MCF5282 Montage- und Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MK22FN256VDC12 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MC9S12ZVHL64 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor *KE02 Series Gebrauchsanweisung

Freescale Semiconductor

Freescale Semiconductor M5213EVB Gebrauchsanweisung

Freescale Semiconductor

Freescale Semiconductor Kinetis TWR-K21D50M Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MPC5565 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor DEMO9S08LG32 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MPC5607B Montage- und Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor RS08 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MPC5510 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MCF52100 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MC9S08PA32 Gebrauchsanweisung

Freescale Semiconductor

Freescale Semiconductor Kinetis K40 MCUs Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MCF52230 ColdFire Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor i.MX51 EVK Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MC9S12VR Series Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor HCS12 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MPC5517G Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor M68HC08 series Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung