Freescale Semiconductor MC68332 Bedienungsanleitung

The content and copyrights of the attached

material are the property of its owner.

Distributed by:

www.Jameco.com ✦ 1-800-831-4242

Jameco Part Number 961012UsersManual

M68300 Family

MC68332

User’s Manual

Freescale Semiconductor, I

For More Information On This Product,

Go to: www.freescale.com

nc...

Freescale Semiconductor

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

Information in this document is provided solely to enable system and software

implementers to use Freescale Semiconductor products. There are no express or

implied copyright licenses granted hereunder to design or fabricate any integrated

circuits or integrated circuits based on the information in this document.

Freescale Semiconductor reserves the right to make changes without further notice to

any products herein. Freescale Semiconductor makes no warranty, representation or

guarantee regarding the suitability of its products for any particular purpose, nor does

Freescale Semiconductor assume any liability arising out of the application or use of

any product or circuit, and specifically disclaims any and all liability, including without

limitation consequential or incidental damages. “Typical” parameters which may be

provided in Freescale Semiconductor data sheets and/or specifications can and do

vary in different applications and actual performance may vary over time. All operating

parameters, including “Typicals” must be validated for each customer application by

customer’s technical experts. Freescale Semiconductor does not convey any license

under its patent rights nor the rights of others. Freescale Semiconductor products are

not designed, intended, or authorized for use as components in systems intended for

surgical implant into the body, or other applications intended to support or sustain life,

or for any other application in which the failure of the Freescale Semiconductor product

could create a situation where personal injury or death may occur. Should Buyer

purchase or use Freescale Semiconductor products for any such unintended or

unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor

and its officers, employees, subsidiaries, affiliates, and distributors harmless against all

claims, costs, damages, and expenses, and reasonable attorney fees arising out of,

directly or indirectly, any claim of personal injury or death associated with such

unintended or unauthorized use, even if such claim alleges that Freescale

Semiconductor was negligent regarding the design or manufacture of the part.

How to Reach Us:

Home Page:

www.freescale.com

E-mail:

[email protected]

USA/Europe or Locations Not Listed:

Freescale Semiconductor

Technical Information Center, CH370

1300 N. Alma School Road

Chandler, Arizona 85224

+1-800-521-6274 or +1-480-768-2130

[email protected]

Europe, Middle East, and Africa:

Freescale Halbleiter Deutschland GmbH

Technical Information Center

Schatzbogen 7

81829 Muenchen, Germany

+44 1296 380 456 (English)

+46 8 52200080 (English)

+49 89 92103 559 (German)

+33 1 69 35 48 48 (French)

[email protected]

Japan:

Freescale Semiconductor Japan Ltd.

Headquarters

ARCO Tower 15F

1-8-1, Shimo-Meguro, Meguro-ku,

Tokyo 153-0064

Japan

0120 191014 or +81 3 5437 9125

[email protected]

Asia/Pacific:

Freescale Semiconductor Hong Kong Ltd.

Technical Information Center

2 Dai King Street

Tai Po Industrial Estate

Tai Po, N.T., Hong Kong

+800 2666 8080

[email protected]

For Literature Requests Only:

Freescale Semiconductor Literature Distribution Center

P.O. Box 5405

Denver, Colorado 80217

1-800-441-2447 or 303-675-2140

Fax: 303-675-2150

[email protected]

MC68332

USER’S MANUAL

Paragraph Title Page

SECTION 1 INTRODUCTION

SECTION 2NOMENCLATURE

2.1 Symbols and Operators .................................................................................. 2-1

2.2 CPU32 Registers ............................................................................................ 2-2

2.3 Pin and Signal Mnemonics ............................................................................. 2-3

2.4 Register Mnemonics ....................................................................................... 2-4

2.5 Conventions ................................................................................................... 2-5

SECTION 3OVERVIEW

3.1 MC68332 Features ......................................................................................... 3-1

3.1.1 System Integration Module (SIM) ........................................................... 3-1

3.1.2 Central Processing Unit (CPU) ............................................................... 3-1

3.1.3 Time Processor Unit (TPU) .................................................................... 3-1

3.1.4 Queued Serial Module (QSM) ................................................................ 3-2

3.1.5 Static RAM Module with TPU Emulation Capability (TPURAM) ............. 3-2

3.2 System Block Diagram and Pin Assignment Diagrams .................................. 3-2

3.3 Pin Descriptions ............................................................................................. 3-5

3.4 Signal Descriptions ......................................................................................... 3-7

3.5 Intermodule Bus ............................................................................................. 3-9

3.6 System Memory Map ..................................................................................... 3-9

3.6.1 Internal Register Map ........................................................................... 3-10

3.6.2 Address Space Maps ........................................................................... 3-10

3.7 System Reset ............................................................................................... 3-15

3.7.1 SIM Reset Mode Selection ................................................................... 3-15

3.7.2 MCU Module Pin Function During Reset ............................................. 3-16

SECTION 4 SYSTEM INTEGRATION MODULE

4.1 General ........................................................................................................... 4-1

4.2 System Configuration and Protection ............................................................. 4-2

4.2.1 Module Mapping ..................................................................................... 4-3

4.2.2 Interrupt Arbitration ................................................................................. 4-3

4.2.3 Show Internal Cycles .............................................................................. 4-4

4.2.4 Factory Test Mode ................................................................................. 4-4

4.2.5 Register Access ..................................................................................... 4-4

4.2.6 Reset Status ........................................................................................... 4-4

4.2.7 Bus Monitor ............................................................................................ 4-5

4.2.8 Halt Monitor ............................................................................................ 4-5

4.2.9 Spurious Interrupt Monitor ...................................................................... 4-5

TABLE OF CONTENTS

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

MC68332

USER’S MANUAL

(Continued)

Paragraph Title Page

TABLE OF CONTENTS

4.2.10 Software Watchdog ................................................................................ 4-5

4.2.11 Periodic Interrupt Timer .......................................................................... 4-7

4.2.12 Low-Power Stop Operation .................................................................... 4-8

4.2.13 Freeze Operation ................................................................................... 4-9

4.3 System Clock ................................................................................................. 4-9

4.3.1 Clock Sources ...................................................................................... 4-10

4.3.2 Clock Synthesizer Operation ................................................................ 4-10

4.3.3 External Bus Clock ............................................................................... 4-15

4.3.4 Low-Power Operation ........................................................................... 4-15

4.3.5 Loss of Reference Signal ..................................................................... 4-16

4.4 External Bus Interface .................................................................................. 4-17

4.4.1 Bus Signals .......................................................................................... 4-18

4.4.1.1 Address Bus ................................................................................. 4-18

4.4.1.2 Address Strobe ............................................................................ 4-18

4.4.1.3 Data Bus ...................................................................................... 4-18

4.4.1.4 Data Strobe .................................................................................. 4-18

4.4.1.5 Read/Write Signal ........................................................................ 4-18

4.4.1.6 Size Signals ................................................................................. 4-19

4.4.1.7 Function Codes ............................................................................ 4-19

4.4.1.8 Data and Size Acknowledge Signals ........................................... 4-19

4.4.1.9 Bus Error Signal ........................................................................... 4-20

4.4.1.10 Halt Signal .................................................................................... 4-20

4.4.1.11 Autovector Signal ......................................................................... 4-20

4.4.2 Dynamic Bus Sizing ............................................................................. 4-20

4.4.3 Operand Alignment .............................................................................. 4-21

4.4.4 Misaligned Operands ........................................................................... 4-22

4.4.5 Operand Transfer Cases ...................................................................... 4-22

4.5 Bus Operation .............................................................................................. 4-22

4.5.1 Synchronization to CLKOUT ................................................................ 4-23

4.5.2 Regular Bus Cycles .............................................................................. 4-23

4.5.2.1 Read Cycle ................................................................................... 4-24

4.5.2.2 Write Cycle ................................................................................... 4-25

4.5.3 Fast Termination Cycles ....................................................................... 4-26

4.5.4 CPU Space Cycles ............................................................................... 4-27

4.5.4.1 Breakpoint Acknowledge Cycle .................................................... 4-28

4.5.4.2 LPSTOP Broadcast Cycle ............................................................ 4-31

4.5.5 Bus Exception Control Cycles .............................................................. 4-31

4.5.5.1 Bus Errors .................................................................................... 4-33

4.5.5.2 Double Bus Faults ........................................................................ 4-33

4.5.5.3 Retry Operation ............................................................................ 4-34

4.5.5.4 Halt Operation .............................................................................. 4-34

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

MC68332

USER’S MANUAL

(Continued)

Paragraph Title Page

TABLE OF CONTENTS

4.5.6 External Bus Arbitration ........................................................................ 4-35

4.5.6.1 Slave (Factory Test) Mode Arbitration ......................................... 4-36

4.5.6.2 Show Cycles ................................................................................ 4-36

4.6 Reset ............................................................................................................ 4-37

4.6.1 Reset Exception Processing ................................................................ 4-37

4.6.2 Reset Control Logic .............................................................................. 4-38

4.6.3 Reset Mode Selection .......................................................................... 4-38

4.6.3.1 Data Bus Mode Selection ............................................................. 4-39

4.6.3.2 Clock Mode Selection .................................................................. 4-41

4.6.3.3 Breakpoint Mode Selection .......................................................... 4-41

4.6.4 MCU Module Pin Function During Reset ............................................. 4-41

4.6.5 Pin State During Reset ......................................................................... 4-42

4.6.5.1 Reset States of SIM Pins ............................................................. 4-42

4.6.5.2 Reset States of Pins Assigned to Other MCU Modules ............... 4-43

4.6.6 Reset Timing ........................................................................................ 4-43

4.6.7 Power-On Reset ................................................................................... 4-44

4.6.8 Reset Processing Summary ................................................................. 4-45

4.6.9 Reset Status Register .......................................................................... 4-46

4.7 Interrupts ...................................................................................................... 4-46

4.7.1 Interrupt Exception Processing ............................................................ 4-46

4.7.2 Interrupt Priority and Recognition ......................................................... 4-46

4.7.3 Interrupt Acknowledge and Arbitration ................................................. 4-47

4.7.4 Interrupt Processing Summary ............................................................. 4-48

4.7.5 Interrupt Acknowledge Bus Cycles ....................................................... 4-49

4.8 Chip Selects ................................................................................................. 4-49

4.8.1 Chip-Select Registers ........................................................................... 4-51

4.8.1.1 Chip-Select Pin Assignment Registers ........................................ 4-52

4.8.1.2 Chip-Select Base Address Registers ........................................... 4-53

4.8.1.3 Chip-Select Option Registers ....................................................... 4-53

4.8.1.4 PORTC Data Register .................................................................. 4-55

4.8.2 Chip-Select Operation .......................................................................... 4-55

4.8.3 Using Chip-Select Signals for Interrupt Acknowledge .......................... 4-55

4.8.4 Chip-Select Reset Operation ................................................................ 4-56

4.9 Parallel Input/Output Ports ........................................................................... 4-58

4.9.1 Pin Assignment Registers .................................................................... 4-58

4.9.2 Data Direction Registers ...................................................................... 4-58

4.9.3 Data Registers ...................................................................................... 4-58

4.10 Factory Test ................................................................................................. 4-58

SECTION 5 CENTRAL PROCESSING UNIT

5.1 General ........................................................................................................... 5-1

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

MC68332

USER’S MANUAL

(Continued)

Paragraph Title Page

TABLE OF CONTENTS

5.2 CPU32 Registers ............................................................................................ 5-2

5.2.1 Data Registers ........................................................................................ 5-3

5.2.2 Address Registers .................................................................................. 5-5

5.2.3 Program Counter .................................................................................... 5-5

5.2.4 Control Registers .................................................................................... 5-5

5.2.4.1 Status Register ............................................................................... 5-5

5.2.4.2 Alternate Function Code Registers ................................................ 5-6

5.2.5 Vector Base Register (VBR) ................................................................... 5-6

5.3 Memory Organization ..................................................................................... 5-6

5.4 Virtual Memory ............................................................................................... 5-8

5.5 Addressing Modes .......................................................................................... 5-8

5.6 Processing States .......................................................................................... 5-8

5.7 Privilege Levels .............................................................................................. 5-9

5.8 Instructions ..................................................................................................... 5-9

5.8.1 M68000 Family Compatibility ............................................................... 5-12

5.8.2 Special Control Instructions .................................................................. 5-13

5.8.2.1 Low Power Stop (LPSTOP) ......................................................... 5-13

5.8.2.2 Table Lookup and Interpolate (TBL) ............................................ 5-13

5.9 Exception Processing ................................................................................... 5-13

5.9.1 Exception Vectors ................................................................................ 5-13

5.9.2 Types of Exceptions ............................................................................. 5-14

5.9.3 Exception Processing Sequence .......................................................... 5-15

5.10 Development Support ................................................................................... 5-15

5.10.1 M68000 Family Development Support ................................................. 5-15

5.10.2 Background Debugging Mode .............................................................. 5-16

5.10.2.1 Enabling BDM .............................................................................. 5-17

5.10.2.2 BDM Sources ............................................................................... 5-17

5.10.2.3 Entering BDM ............................................................................... 5-18

5.10.2.4 BDM Commands .......................................................................... 5-19

5.10.2.5 Background Mode Registers ........................................................ 5-20

5.10.2.6 Returning from BDM .................................................................... 5-20

5.10.2.7 Serial Interface ............................................................................. 5-20

5.10.3 Recommended BDM Connection ......................................................... 5-22

5.10.4 Deterministic Opcode Tracking ............................................................ 5-22

5.10.5 On-Chip Breakpoint Hardware ............................................................. 5-23

5.11 Loop Mode Instruction Execution ................................................................. 5-23

SECTION 6QUEUED SERIAL MODULE

6.1 General ........................................................................................................... 6-1

6.2 QSM Registers and Address Map .................................................................. 6-2

6.2.1 QSM Global Registers ........................................................................... 6-2

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

MC68332

USER’S MANUAL

(Continued)

Paragraph Title Page

TABLE OF CONTENTS

6.2.1.1 Low-Power Stop Operation ........................................................... 6-2

6.2.1.2 Freeze Operation .......................................................................... 6-3

6.2.1.3 QSM Interrupts .............................................................................. 6-3

6.2.2 QSM Pin Control Registers ................................................................... 6-3

6.3 Queued Serial Peripheral Interface ................................................................ 6-4

6.3.1 QSPI Registers ...................................................................................... 6-6

6.3.1.1 Control Registers ........................................................................... 6-7

6.3.1.2 Status Register .............................................................................. 6-7

6.3.2 QSPI RAM ............................................................................................. 6-7

6.3.2.1 Receive RAM ................................................................................. 6-7

6.3.2.2 Transmit RAM ................................................................................ 6-8

6.3.2.3 Command RAM ............................................................................. 6-8

6.3.3 QSPI Pins ............................................................................................... 6-8

6.3.4 QSPI Operation ...................................................................................... 6-9

6.3.5 QSPI Operating Modes ........................................................................ 6-10

6.3.5.1 Master Mode ................................................................................ 6-17

6.3.5.2 Master Wraparound Mode ........................................................... 6-20

6.3.5.3 Slave Mode .................................................................................. 6-20

6.3.5.4 Slave Wraparound Mode ............................................................. 6-22

6.3.6 Peripheral Chip Selects ........................................................................ 6-22

6.4 Serial Communication Interface ................................................................... 6-22

6.4.1 SCI Registers ....................................................................................... 6-22

6.4.1.1 Control Registers ......................................................................... 6-22

6.4.1.2 Status Register ............................................................................. 6-25

6.4.1.3 Data Register ............................................................................... 6-25

6.4.2 SCI Pins .............................................................................................. 6-25

6.4.3 SCI Operation ....................................................................................... 6-25

6.4.3.1 Definition of Terms ....................................................................... 6-25

6.4.3.2 Serial Formats .............................................................................. 6-26

6.4.3.3 Baud Clock ................................................................................... 6-26

6.4.3.4 Parity Checking ............................................................................ 6-27

6.4.3.5 Transmitter Operation .................................................................. 6-27

6.4.3.6 Receiver Operation ...................................................................... 6-28

6.4.3.7 Idle-Line Detection ....................................................................... 6-29

6.4.3.8 Receiver Wakeup ......................................................................... 6-30

6.4.3.9 Internal Loop ................................................................................ 6-30

6.5 QSM Initialization ......................................................................................... 6-31

SECTION 7TIME PROCESSOR UNIT

7.1 General ........................................................................................................... 7-1

7.2 TPU Components ........................................................................................... 7-2

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

MC68332

USER’S MANUAL

(Continued)

Paragraph Title Page

TABLE OF CONTENTS

7.2.1 Time Bases ............................................................................................ 7-2

7.2.2 Timer Channels ...................................................................................... 7-2

7.2.3 Scheduler ............................................................................................... 7-2

7.2.4 Microengine ............................................................................................ 7-2

7.2.5 Host Interface ......................................................................................... 7-2

7.2.6 Parameter RAM ...................................................................................... 7-3

7.3 TPU Operation ............................................................................................... 7-3

7.3.1 Event Timing .......................................................................................... 7-3

7.3.2 Channel Orthogonality ............................................................................ 7-4

7.3.3 Interchannel Communication .................................................................. 7-4

7.3.4 Programmable Channel Service Priority ................................................ 7-4

7.3.5 Coherency .............................................................................................. 7-4

7.3.6 Emulation Support .................................................................................. 7-4

7.3.7 TPU Interrupts ........................................................................................ 7-5

7.4 Standard and Enhanced Standard Time Functions ....................................... 7-6

7.4.1 Discrete Input/Output (DIO) .................................................................... 7-6

7.4.2 Input Capture/Input Transition Counter (ITC) ......................................... 7-6

7.4.3 Output Compare (OC) ............................................................................ 7-6

7.4.4 Pulse-Width Modulation (PWM) ............................................................. 7-7

7.4.5 Synchronized Pulse-Width Modulation (SPWM) .................................... 7-7

7.4.6 Period Measurement with Additional Transition Detect (PMA) .............. 7-7

7.4.7 Period Measurement with Missing Transition Detect (PMM) ................. 7-7

7.4.8 Position-Synchronized Pulse Generator (PSP) ...................................... 7-7

7.4.9 Stepper Motor (SM) ................................................................................ 7-8

7.4.10 Period/Pulse-Width Accumulator (PPWA) .............................................. 7-8

7.4.11 Quadrature Decode (QDEC) .................................................................. 7-9

7.5 Motion Control Time Functions ...................................................................... 7-9

7.5.1 Table Stepper Motor (TSM) .................................................................... 7-9

7.5.2 New Input Capture/Transition Counter (NITC) ....................................... 7-9

7.5.3 Queued Output Match (QOM) .............................................................. 7-10

7.5.4 Programmable Time Accumulator (PTA) ............................................. 7-10

7.5.5 Multichannel Pulse-Width Modulation (MCPWM) ................................ 7-10

7.5.6 Fast Quadrature Decode (FQD) ........................................................... 7-10

7.5.7 Universal Asynchronous Receiver/Transmitter (UART) ....................... 7-11

7.5.8 Brushless Motor Commutation (COMM) .............................................. 7-11

7.5.9 Frequency Measurement (FQM) .......................................................... 7-11

7.5.10 Hall Effect Decode (HALLD) ................................................................. 7-11

7.6 Host Interface Registers ............................................................................... 7-11

7.6.1 System Configuration Registers ........................................................... 7-12

7.6.1.1 Prescaler Control for TCR1 .......................................................... 7-12

7.6.1.2 Prescaler Control for TCR2 .......................................................... 7-12

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

MC68332

USER’S MANUAL

(Continued)

Paragraph Title Page

TABLE OF CONTENTS

7.6.1.3 Emulation Control ......................................................................... 7-13

7.6.1.4 Low-Power Stop Control .............................................................. 7-13

7.6.2 Channel Control Registers ................................................................... 7-14

7.6.2.1 Channel Interrupt Enable and Status Registers ........................... 7-14

7.6.2.2 Channel Function Select Registers .............................................. 7-14

7.6.2.3 Host Sequence Registers ............................................................ 7-14

7.6.2.4 Host Service Registers ................................................................. 7-14

7.6.2.5 Channel Priority Registers ........................................................... 7-14

7.6.3 Development Support and Test Registers ........................................... 7-15

SECTION 8STANDBY RAM WITH TPU EMULATION

8.1 General ........................................................................................................... 8-1

8.2 TPURAM Register Block ................................................................................ 8-1

8.3 TPURAM Array Address Mapping .................................................................. 8-1

8.4 TPURAM Privilege Level ................................................................................ 8-2

8.5 Normal Operation ........................................................................................... 8-2

8.6 Standby Operation ......................................................................................... 8-2

8.7 Low-Power Stop Operation ............................................................................ 8-3

8.8 Reset .............................................................................................................. 8-3

8.9 TPU Microcode Emulation .............................................................................. 8-3

APPENDIX A ELECTRICAL CHARACTERISTICS

APPENDIX B MECHANICAL DATA AND ORDERING INFORMATION

APPENDIX CDEVELOPMENT SUPPORT

C.1 M68MMDS1632 Modular Development System ........................................... C-1

C.2 M68MEVB1632 Modular Evaluation Board ................................................... C-2

APPENDIX D REGISTER SUMMARY

D.1 Central Processing Unit ................................................................................. D-1

D.1.1 CPU32 Register Model .......................................................................... D-2

D.1.2 SR — Status Register ........................................................................... D-3

D.2 System Integration Module ............................................................................ D-3

D.2.1 SIMCR — Module Configuration Register ............................. $YFFA00 D-5

D.2.2 SIMTR — System Integration Test Register .......................... $YFFA02 D-6

D.2.3 SYNCR — Clock Synthesizer Control Register .................... $YFFA04 D-6

D.2.4 RSR — Reset Status Register .............................................. $YFFA07 D-7

D.2.5 SIMTRE — System Integration Test Register (ECLK)........... $YFFA08 D-7

D.2.6 PORTE0/PORTE1 — Port E Data Register..........$YFFA11, $YFFA13 D-8

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

Inhaltsverzeichnis

Andere Freescale Semiconductor Mikrocontroller Handbücher

Freescale Semiconductor

Freescale Semiconductor MCF51CN128 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MC9S12DJ128E Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MMA7455L Gebrauchsanweisung

Freescale Semiconductor

Freescale Semiconductor MCF52100 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor TWR-K21F120M Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor T4240 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor NXP DEMO9S08SF4 Technisches Datenblatt

Freescale Semiconductor

Freescale Semiconductor MCF52230 ColdFire Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MC9S12VR Series Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MPC5634M Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor *KE02 Series Gebrauchsanweisung

Freescale Semiconductor

Freescale Semiconductor MK22FN256VDC12 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor KL02 Series Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MC9S08PA32 Gebrauchsanweisung

Freescale Semiconductor

Freescale Semiconductor Kinetis K40 MCUs Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MPC5553 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor SABRE MCIMX6Q-SDP Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MPC5517G Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MC9S08JS16 Series Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor ColdFire MCF5213 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor FRDM-KL03Z Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MMA7260QT Gebrauchsanweisung

Freescale Semiconductor

Freescale Semiconductor MPC5565 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MCF5282 Montage- und Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung