FRIEDLAND D913 Libra +100m Bedienungsanleitung
48329PL Ed1
Instruction Manual
D913 Libra+ 100M Chime Includes push
Bruksanvisning
D913 Libra+ 100M trådlös dörrsignal i med tryckknapp
Brugsanvisning
D913 Libra+ 100M Trådløs Ringeklokke med ringetryk
Käyttöohje
D913 Libra+ 100M Langaton lasikumistin, sisältää painikkeen
àÌÒÚÛ͈Ëfl
D913 Libra+ á‚ÓÌÓÍ (ˆ‚ÂÚ – Ò·Ó) Ë ÍÌÓÔ͇, 100Ï
Instrukcja obsługi
D913 Libra+ 100M bärbar ringklocka Odbiornik z gong
1
Contents
Checking pack contents.................................. Pg. 2
Safety..............................................................
Quick start.......................................................
Open bell push................................................ Pg. 3
Fit the push battery.........................................
Fit the chime battery.......................................
Volume control ...............................................
Sliding window ............................................... Pg. 4
Use of icons ....................................................
Programming procedures............................... Pg. 5
Recall function ...............................................
Chime sounds ................................................
Mount bell push .............................................
Chime position ...............................................
Troubleshooting.............................................. Pg. 6
Specifications.................................................. Pg. 7
Disposal and recycling.................................... Pg. 8
Guarantee.......................................................
Declaration......................................................
Installation and Use
Libra + 100m Chime with Push
ENGLISH
Libra+ 100m Chime with Push
Thank you for choosing this Friedland product. Please use the following instructions to
ensure correct installation and use. Keep these notes in a safe place for future reference.
Unpack your chime kit and identify the
following parts:
¬●Chime
● Chime bracket
● Bell push
● CR2032 battery for bell push
● 2 x fixing screws for push
● 2 x fixing screws for chime
● 2 x wall plugs
●Adhesive pad
You will need:
●3 X LR6 ‘AA’ Alkaline batteries
●A4mm cross-head scrwdriver
● Asmall flat bladed screwdriver
● A6mm masonry drill
Checking pack contents
Before proceeding with the installation,
please note the following safety warnings:
¬●Always follow the manufacturer’s advice
when using power tools and wear suitable
protective equipment (e.g. safety goggles)
when drilling holes etc.
¬●Before drilling holes in walls, check for
hidden electricity cables and water pipes,
the use of a cable/pipe locater maybe
advisable if in doubt.
Safety
The bell push supplied with this kit is pre-programmed to operate with the chime. You need to do the following to get started:
●Open the bell push
●Fit the push battery
●Fit the chime batteries
●Check the volume setting
When you operate the bell push, the chime will sound and the1st Icon will flash. If you have additional
pushes or you want to assign a different icon to your push, you will need to follow the programming procedure.
Quick start
2
3
Insert a flat bladed screwdriver into
the slot A at the base of the push.
Carefully lever the cover and base
apart (Fig. 1).
Open the bell push
A
Fig. 1
Insert the CR2032 coin cell. Ensure the face
marked ‘+’ is uppermost (Fig. 2).
To fit the push battery
Fig. 2 CR2023
+
To remove the chime battery cover, press at
point B and slide the cover back 5mm, then lift
off. Insert 3 x LR6 ‘AA’ alkaline batteries (not
supplied). Observe polarity as marked inside
the battery compartment.
Fit the chime batteries
Fig. 3
B
The volume control is behind the sliding window on
the front of the chime. Initially, set the control to
mid-point. After you have tested your system,
adjust to the desired volume.
Volume
control
Fig. 4
Volume control
4
Sliding window
C
Fig. 5
Release the catch (C) and slide open the
window (Fig. 5).
Use of icons
In addition to the chime sounds, your chime has a
visual indication to show which device has activated
it. An icon will illuminate when the chime is
activated by a bell push or another compatible
device. The chime supports 3 icons:
The ‘Main door’ and ‘Back door’ icons are usually
used for bell pushes. The other icons is intended for
use with other compatible devices, such as PIR
movement detectors and Telephone ring detector.
Icons numbered 1 to 3 are also included. The Icons
are self-adhesive, supplied in strips of 3. They can
be changed, if required, by opening the sliding
window of the chime and gently peeling off the
strips. If desired, the strips can be cut into individual
icons and fixed to the chime in a different order.
Use the Programming procedure to change the
icon associated with a push.
!
Main
door Back
door Alert
symbol
✃
5
Programming procedure
Learn mode
To enable your chime to learn the identity of your
bell push:
¬●Press the ●button and keep it pressed. Each
Icon will light in turn. When the Icon you want is
lit, release the button.
¬●While the Icon you have selected is lit, operate
your push. The chime will sound. The Icon will flash.
Unlearn procedure
If you want to remove a push from the chime’s
memory:
¬●Press the ●button and keep it pressed.
Each Icon will light in turn. When the Icon
associated with the push to be un-learnt is
lit, release the button.
¬●Press and hold down both ●& buttons,
until a ‘beep’ sound is heard.
Changing the tune
Operate the push. While the icon is flashing,
press the button. Press the button again
and the tune will change. Repeat until the
tune you want plays.
Ashort push of the ●button will flash the icon that
was last in use.
Recall function
Mount using either the double sided
adhesive pad, or the screws provided
(see Fig 6). Test your push before
fixing. Avoid fixing to metal
structures.
Mount the bell push
Chime sounds
The Chime can be free standing or wall mounted
using the wall bracket provided. If wall mounting is
preferred, screw the bracket to the wall (see Fig 7).
The Chime hooks onto the wall bracket as illustrated.
Chime position
To hear the chime sounds without operating the
bell push, press the button. Press the button
again and the tune will change.
Fig. 6
Fig. 7
Changing the tune
6
A ‘beep’ sound is heard in learn mode…
¬●The push you are programming has already been learnt by the chime.
¬●If you want to change the icon associated with the push, use the un-learn procedure, then
programme the push again.
Two ‘beep’ sounds are heard after the normal chime sound…
¬●This indicates a low battery in the bell push that activated the chime. Fit a new battery, type CR2032.
When the bell push is operated, the amber confidence light does not turn on, or is only
on for a short time…
¬●In normal operation, the amber light will turn on for 1 second. When the battery is weak,
the light will only turn on for a short time. Fit a new battery, type CR2032.
The chime does not work…
●Check that the batteries are the correct type, LR6 ‘AA’ cells. Only use alkaline batteries.
●Check that the batteries are fitted correctly.
●The chime could be out of range of the bell push. Try the chime in a different location.
●The chime might not have learnt the identity of the bell push. Follow the programming procedure.
The chime does not sound…
●Check that the volume control is not at the minimum setting.
Range is reduced…
●Metal structures, including uPVC door frames can reduce the range of the product.
Avoid mounting the push or chime on or near metal structures.
●Other equipment can cause radio interference that affects your chime.
●Walls and ceilings will reduce the range.
●Weak batteries will reduce range. Replace every 12 –18 months. In cold conditions (below 5ºC),
batteries may need to be replaced more often.
Troubleshooting
7
Amber light flashes…
●When the chime battery is low, an amber light will flash every 5 seconds. Fit new batteries in the
chime, type LR6 ‘AA’ cells. Only use alkaline batteries.
Chime/Push does not work with my older Libra equipment…
● Libra + is not compatible with the earlier Libra system.
● Only use accessories marked Libra +.
Troubleshooting cont....
SPECIFICATIONS
Specification Chime Bell push
Operating Temperature 0 to 40ºC -10 to 40ºC
RF Frequency – UK/Europe 868MHz 868MHz
Range (open Field) 100 metres 100 metres
Sound Level (typical) 80dBA @ 1m -
RF Power - <10mW
Battery Type LR6 CR2032
Battery Life (5 activations/day) 12 months 18 months
IP Rating IP3x IP55
8
Friedland guarantees this product for 2 years
from the date of purchase. Proof of purchase
is required; this does not affect your statutory
rights. If you require further information about
your product, call the Friedland helpline on
01268 563066.
Guarantee
Batteries and waste electrical products should
not be disposed of with household waste.
Please recycle where these facilities exist.
Check with your local authority or retailer for
recycling advice.
Disposal & Recycling
Novar ED&S hereby declares that this product
is in compliance with the essential requirements
and other relevant provisions of the Radio and
Telecommunications Terminal Equipment
(R&TTE) directive, 1999/5/EC.
Declaration
Friedland, The Arnold Centre, Paycocke Road, Basildon, Essex, SS14 3EA
www.friedland.co.uk
Kontrollera paketets innehåll............................... Pg. 10
Säkerhet..............................................................
Uppsättning..........................................................
Öppna tryckknappen............................................Pg. 11
Montering av tryckknappens batteri....................
Montering av ringklockans batterier.....................
Ringklockans funktioner......................................
Volymkontroll ......................................................
Skjutlucka ........................................................... Pg. 12
Användning av ikoner .........................................
Programmeringsprocedur ................................... Pg. 13
Återkallande funktion...........................................
Ringklocksljud ....................................................
Montering av ringknappen ..................................
Ringklockans placering .......................................
Felsökning........................................................... Pg. 14
Specifikationer..................................................... Pg. 15
Sluthantering och återvinning.............................. Pg. 16
Garanti.................................................................
Deklaration..........................................................
Installation
Libra + Sats för trådlös ringklocka
SWEDISH
9
Inhaltsverzeichnis
Sprachen:
Andere FRIEDLAND Zubehör Handbücher
FRIEDLAND
FRIEDLAND Libra+ D912 Bedienungsanleitung
FRIEDLAND
FRIEDLAND Wirefree AlarmInterface Module Bedienungsanleitung
FRIEDLAND
FRIEDLAND Libra D285 Bedienungsanleitung
FRIEDLAND
FRIEDLAND Libra+ D930S Bedienungsanleitung
FRIEDLAND
FRIEDLAND Evo D426E Bedienungsanleitung
FRIEDLAND
FRIEDLAND Evo Wirefree 200M Bedienungsanleitung
FRIEDLAND
FRIEDLAND spectra 140 L210N WHI Bedienungsanleitung
FRIEDLAND
FRIEDLAND Libra+ Push Kurzanleitung
FRIEDLAND
FRIEDLAND D942S Libra+ Bedienungsanleitung
FRIEDLAND
FRIEDLAND Libra+ Bedienungsanleitung
