FujiFilm APERTO Lucent Bedienungsanleitung

Q2ec-FM0049-02

Operating Manual V7.1～

Q2ec-FM0049

（2）

Manufacturer

FUJIFILM Healthcare Corporation

2-1, Shintoyofuta, Kashiwa-shi,

Chiba, 277-0804 Japan

CE Marking

Only for EU countries

The Medical Device as specified below and related options meet the provisions of the EC-Directive 93/42/EEC.

Product Name : MR Imaging System

Product Classification : IIa

Model : APERTO Lucent

AIRIS Vento

Manufacturer : FUJIFILM Healthcare Corporation

2-1, Shintoyofuta, Kashiwa-shi,

Chiba, 277-0804 Japan

European : FUJIFILM Healthcare Deutschland GmbH

Otto-von-Guericke-Ring 3,

D-65205 Wiesbaden, Germany

Representative Phone: +49 6122 7036 0

Fax: +49 6122 7036 10

WEEE Marking

Only for EU countries

Do not dispose medical devices together with household waste!

In observance of the European Directive on waste electrical and electronic equipment and its implementation in

accordance with national law, medical devices that have reached the end of their product life must be collected

separately and returned to an environmentally compatible recycling facility.

Please contact your local FUJIFILM Healthcare Corporation distributor for information about qualified recycling

facility.

Symbol Description

Q2ec-FM0049

This symbol indicates prohibited conditions or actions. The description accompanying this symbol indicates conditions or

actions that are prohibited.

This symbol indicates possible danger that could result in light or moderate injury of personnel, partial equipment damage,

or deletion of computer data if the warning is ignored and the equipment is handled incorrectly.

This symbol indicates a recommended procedure, condition, or action that requires careful attention when operating the

equipment.

Preface

This symbol indicates a potential (latent) danger that could result in death or serious injury of personnel, total destruction

of equipment, or fire if the warning is ignored and the equipment is handled incorrectly. The following is an example of a

potential danger:

(Ex.) Failure to observe this warning could result in death if the cover is opened and a high-voltage terminal is touched.

NOTICE

Before using MR Imaging System APERTO Lucent, or AIRIS Vento carefully read this manual and the instruction manual for each

product and the receiver coils to take full advantage of performance features of these products.

In particular, make sure that you completely understand and observe all safety precautions.

Items requiring special attention are indicated with one of the following symbols, depending on the level of danger.

Screen shots for APERTO Lucent are used as an example in this manual. They might be different from the screen shots displayed if

you are using AIRIS Vento.

（3）

Q2ec-FM0049

Click

Position the cursor over an object, and then press the left mouse button.

Most system operations are performed by using a mouse. The following terminology is used to describe the basic mouse operations.

Double-click

Position the cursor over an object, and then press the left mouse button twice in rapid succession.

Drag

Click an object, and then move the mouse while continuing to hold down the left mouse button.

Drag & drop

Move an object to another location by dragging it, and then releasing the mouse button to leave it at the new location.

■Terms describing mouse operations

Zooming in on and zooming out from an image

Specify Select Mode for the mouse.

Select an image. While holding down the Ctrl key, rotate the wheel between the left and

right mouse buttons away from you to zoom in on the selected image, or rotate the wheel

toward you to zoom out from the image.

■Image operations

Moving an image

Specify Select Mode for the mouse.

Select an image. You can move the image by holding down either mouse button and

dragging.

When the mouse is in Select Mode, you can use the mouse to zoom in on, zoom out from, and move images.

Right-click

Position the cursor over an object, and then press the right mouse button.

Specifying Select Mode

Right-click an image. In the

menu that appears, choose

Select Mode.

Mouse Operations

（4）

Q2ec-FM0049

Contents

Manufacturer (2)

CE Marking (2)

WEEE Marking (2)

Preface (3)

Mouse Operations (4)

Contents (5)

Chapter 1 Device Configuration

1.1 Gantry・Table（APERTO Lucent）and Operation console 1

1.2 Switch unit 2

Chapter 2 Starting the System

2.1 Starting the system 3

2.2 Launcher 4

Chapter 3 Preparing for Imaging

3.1 Preparing the patient 5

3.2 Gantry and Control panel 6

Chapter 4 Registering Patient Data 7-8

Chapter 5 Explanation of Window Items

5.1 Exam window – Imaging 9

5.2 Exam window – Review 10

Chapter 6 Imaging

6.1 Scanogram imaging 11

6.2 Imaging of T2 weighted images 12-13

6.3 Imaging of T1 weighted images or FLAIR images (reservation) 14-15

6.4 Imaging of diffusion weighted images (DWI) (reservation):for Gating 16-19

6.5 Imaging of MRA imaging(reservation) 20

6.6 How to put gating sensor 21

6.7 Position Links 22-23

Chapter 7 Reviewing Images

7.1 Displaying images in the Review window 24-25

7.2 Changing the layout of the Review window 26-27

（5）

Q2ec-FM0049

Contents

Chapter 8 Image Processing

8.1 Clipping processing and MIP rotation 28-35

8.2 MIP Rotating 36-37

Chapter 9 Filming 38-41

Chapter 10 Saving Images and DICOM Transfer(CD-R/DVD±R) 42-43

Chapter 11 Shutting Down the System

11.1 Procedures for shutting down the system 44-45

11.2 If normal shutdown fails 46-49

（6）

Q2ec-FM0049

1.1 Gantry・Table（APERTO Lucent）and Operation console

Chapter 1 Device Configuration

Table

Gantry

Control

panel

Operation console

Switch unit

Q2ec-FM00492

1.2 Switch unit

Chapter 1 Device Configuration

The switch unit is the red frame part.

Top view

[STOP] Stops imaging. GANTRY

CPU

Imaging is impossible if

EMERGENCY or SYSTEM

ERROR is lit

[ECG] Electrocardiographic sound volume

[AUTO VOICE] Automatic voice volume

control

[MIC] Microphone volume control

●Imaging operation

[START] Starts imaging.

●System status display

[TALK] Enables conversation with a patient in

the shielded room.

Adjust the speaker volume.

[PAUSE] Pauses imaging.

Mute the speaker volume.

●Emergency

stop button

●Volume controls

Imaging is possible if both

CPU and GANTRY are lit.

●Power

supply

Q2ec-FM00493

Press the GANTRY button.

The button lights up and the MRI unit turns on.

The window shows the startup progress.

Press the CPU button on the switch

unit.

The button lights up.

Switch unit

CPU button

GANTRY button

3Make sure that startup has finished.

When startup finishes, both CPU READY and

MR READY on the switch unit light up and the

Launcher appears in the window.

Starting up takes about four minutes.

Operation window

Launcher

Chapter 2 Starting the System

2.1 Starting the system

Q2ec-FM00494

2.2 Launcher

5System Settings

Displays a window for setting up

the system environment.

1 2 3 4 5 6 7 8 9 10 11

4Protocol / Task Library

Displays a list of protocols and

tasks.

Shutdown

Shuts down the system.

Remaining time

Displays the amount of time

required for imaging to finish.

3Waveform

Displays waveform information.

Help

Displays version information.

Indicator

Indicates the progress of imaging

that is being performed.

12 13

1 6

Patient Registration

Displays a window for registering

patient data.

Maintenance

Used by maintenance personnel.

Database Usage

Displays how much of the

database has been used.

2Patient Directory

Displays a window for viewing,

specifying, and saving patient data.

Rapid Registration

Displays a window for registering

abbreviated patient data when

emergency imaging is required.

Media Usage

Displays how much of the media

(such as a DVD) has been used.

Chapter 2 Starting the System

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere FujiFilm Medizinische Geräte Handbücher

FujiFilm

FujiFilm Sonosite PX System Bedienungsanleitung

FujiFilm

FujiFilm Sonart Betriebsanleitung

FujiFilm

FujiFilm SonoSite SII Bedienungsanleitung

FujiFilm

FujiFilm DR-ID 1300 Bedienungsanleitung

FujiFilm

FujiFilm VisualSonics Vevo MD Bedienungsanleitung

FujiFilm

FujiFilm SONOSITE X-PORTE Bedienungsanleitung

FujiFilm

FujiFilm SonoSite iViz Betriebsanleitung

FujiFilm

FujiFilm FCR XG-1 Bedienungsanleitung

FujiFilm

FujiFilm XG5000 Bedienungsanleitung

FujiFilm

FujiFilm FCR PRIMA T2 Bedienungsanleitung

FujiFilm

FujiFilm SonoSite Edge II Bedienungsanleitung

FujiFilm

FujiFilm SonoSite Edge II Bedienungsanleitung

FujiFilm

FujiFilm SONOSITE X-PORTE Betriebsanleitung

FujiFilm

FujiFilm SonoSite SII Betriebsanleitung

FujiFilm

FujiFilm SonoSite SII Bedienungsanleitung

FujiFilm

FujiFilm SONOSITE X-PORTE Bedienungsanleitung

FujiFilm

FujiFilm SONOSITE X-PORTE Betriebsanleitung

FujiFilm

FujiFilm SonoSite Edge II Bedienungsanleitung

FujiFilm

FujiFilm PB2020-M Bedienungsanleitung

FujiFilm

FujiFilm SonoSite Edge II Betriebsanleitung

FujiFilm

FujiFilm SONOSITE X-PORTE Bedienungsanleitung

FujiFilm

FujiFilm SonoSite PowerPark Bedienungsanleitung

FujiFilm

FujiFilm Revoria Press SC180 Bedienungsanleitung

FujiFilm

FujiFilm SonoSite Edge II Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung