FujiFilm FCR XG-1 Bedienungsanleitung

FCR XG-1/CR CLFCR XG-1/CR CL

CR-IR346/348CLCR-IR346/348CL

Service ManualService Manual

Japanese export restrictions and foreign exchange regulations apply to

this equipment.

Therefore, government

approval obtained

through due

procedure is required in order to export or otherwise remove such

equipment from Japan.

Note that the same restrictions and regulations apply not only to the

main unit but also to after-sale parts, service manuals and service

training (for exporting or transferring technology) when such items are

dispatched or shipped to foreign countries and when service training is

given for trainees from foreign countries.

Export Restrictions Applying to this Equip

ment

Precautions in Using the Service Manual

This manual should not be used by anyone other than the servicing staff

members qualified through the training specified by our company. Since

this manual contains condential information including engineering know-

how related to product development, it is prohibited to distribute the manual

to users or to allow them free access to the manual without obtaining prior

permission from FUJIFILM Corporation.

WARNING

This manual is written for International distribution (including

distribution in the U.S.) and therefore may contain references to

mammography related options.

Mammography functionality for this product is not commercially

available in the US, pending FDA Approval.

This functionality must not be activated on US models, the only

breast related functionality available in the U.S. is the Specimen

Imaging Application.

I

p

o

r

t

a

t

o

t

i

c

e

C

o

BLANK PAGE

Introduction



Notes on the Use of the Service Manual

This document is

intended to be

read by the

service

personnel of FUJIFILM Corporation or authorized agent who

is commissioned by FUJIFILM Corporation to perform

servicing tasks.

Under these circumstances, no one is allowed to perform the

following actions without the prior written

permission from

FUJIFILM Corporation.



Duplicating or reproducing this

document in whole or

in part



Disclosing this document, in w

hole or in part, to a person other than

the authorized service personnel



Lending or transferring this

document, in whole or in

part, to a third

party

Due care

must be

exercised when

handling this

document

because it contains product internal structure descriptions

and other condential information.

When the contents of

this document need be

changed, the

information about such changes will be conveyed using “Engineering

Change Notice (ECN)”.

The “Engineering

Change Notice

(ECN)” m

ust also

be handled

using the same care as for this document.

Due to

a product

development schedule,

the product

specications and available options/variations prevailing at

the time of the release of this document may differ from the

descriptions given in this document. In such an instance, a

Service Engineering Information will be issued as needed to

furnish latest information about inapplicable specications

and components.

If you

have any doubt

about the contents

of this

document

or nd errors, contact your local FUJIFILM representative.



Warning and Cautionary Informa

tion

Precautions during the service work are indicated by the following terms

and symbols.

WARNING

Serious injuries or death may result if this precaution is not

observed.

Damage of the unit and customer database may also occur.

CAUTION

Mild or moderate injuries may result if this precaution is not

observed.

Serious malfunction (which may be unrepairable or difcult to

repair) may also occur.

➤

IMPORTANT

Abnormal

equipmen

t operat

ions (ea

sy to re

pair) may

result if

this

precaut

ion is no

t observ

ed.



NOTE



Indicates items which require particular attention during the necessary

work procedure.

➥

REFERENCE

Explanation of related items and terms.



Screen Displays Acc

ording to Different OSs

This manual uses either of the Windows 2000/XP/Vista screen displays.

When setting procedures to be performed are different between

Windows 2000, Windows XP and Windows Vista, follow the procedure

specic to the used OS to perform necessary settings.

Introduction



Servicing Instruments and T

ools That Require

Inspection/Calibration

The machine should be installed and serviced by use of servicing

instruments and tools that have been regularly inspected and calibrated

as appropriate.

If the machine were serviced using servicing instruments and tools that

have not been inspected and calibrated, proper performance of the

machine could not be guaranteed.

Servicing instruments and tools that require inspection/calibration are

as listed below.

The inspection/calibration should be planned and performed in

accordance with the specications and instruction manuals of the

applicable servicing instruments and tools.

●

Instruments and tools that require inspe

ction/calibration

Digital multimeter





Precautionary Labe

To prevent danger to humans and serious accidents, observe the

following.

WARNINGS

●

Unless indicated otherwise, be sure to turn off the power switch

before maintenance work, and disconnect the power plug from

the outlet.

Even if the power switch is OFF, 100 to 240VAC (differs

according to machine specications) will still be supplied to the

primary

input te

rminal o

f the un

it if the

power ca

ble is

connected, and this may result in possible electric hazards.

●

As neckties, scarves, and necklaces may get caught in the unit

during work, remove these items or take precautions against

such accidents.

●

Never modify the unit unless otherwise specied.

Modication of the safety unit (interlock, breaker, temperature

fuse, etc.) will cause serious problems as it is not only

dangerous but violates the related laws and regulations.

CAUTIONS

●

The grounding wire must be connected.

●

To avoid damages to the parts/units due to static discharge, use

a wrist strap putting one end on your wrist and the other end on

the grounded section of the equipment, as illustrated below.

●

When doing so, make sure to unplug the power connector from

the socket to avoid electrical hazards.

00010003.EPS

Wrist strap

Introduction

Andere Handbücher für FCR XG-1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere FujiFilm Medizinische Geräte Handbücher

FujiFilm

FujiFilm Sonosite PX System Bedienungsanleitung

FujiFilm

FujiFilm CR-IR 357 Bedienungsanleitung

FujiFilm

FujiFilm EB-530US Bedienungsanleitung

FujiFilm

FujiFilm VisualSonics Vevo MD Bedienungsanleitung

FujiFilm

FujiFilm SonoSite Edge Bedienungsanleitung

FujiFilm

FujiFilm SonoSite SII Betriebsanleitung

FujiFilm

FujiFilm SonoSite S Series Betriebsanleitung

FujiFilm

FujiFilm SonoSite M-Turbo Bedienungsanleitung

FujiFilm

FujiFilm CR-IR341 Bedienungsanleitung

FujiFilm

FujiFilm SonoSite SII Stand Bedienungsanleitung

FujiFilm

FujiFilm Sonosite Mini-Dock Bedienungsanleitung

FujiFilm

FujiFilm PB2020-M Bedienungsanleitung

FujiFilm

FujiFilm XG5000 Bedienungsanleitung

FujiFilm

FujiFilm SonoSite iViz Betriebsanleitung

FujiFilm

FujiFilm SONOSITE X-PORTE Bedienungsanleitung

FujiFilm

FujiFilm SonoSite Edge II Bedienungsanleitung

FujiFilm

FujiFilm SonoSite SII Bedienungsanleitung

FujiFilm

FujiFilm SonoSite NanoMaxx Betriebsanleitung

FujiFilm

FujiFilm APERTO Lucent Bedienungsanleitung

FujiFilm

FujiFilm SonoSite Edge II Betriebsanleitung

FujiFilm

FujiFilm EG-580UT Bedienungsanleitung

FujiFilm

FujiFilm EG-580UR Bedienungsanleitung

FujiFilm

FujiFilm SonoSite iViz Bedienungsanleitung

FujiFilm

FujiFilm FLA-7000 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung