FujiFilm Instax SHARE SP-2 Bedienungsanleitung

BOB708-201

User’s Guide/Trouble shooting/Safety precautions

Bedienungsanleitung/Fehlerbehebung/Sicherheitsmaßnahmen

Guide d’utilisation/Guide de dépannage/Précautions de sécurité

Manual de instrucciones/Solución de problemas/Precauciones de seguridad

使用說明書/現象、可能的原因及解決措施/安全注意事項

사용설명서/문제 해결/안전을 위한 주의사항

instax_BO-B_6lang.indb 1 4/13/2016 10:33:36 AM

ENGLISH:

See pages 3 to 29.

DEUTSCH:

Siehe Seiten 31 bis 57.

FRANÇAIS:

Voir pages 59 à 85.

ESPAÑOL:

Consulte las páginas 87 a 113.

中國語:

請參閱第 115 到141 頁。

한국어:

143~169페이지를 참조하십시오.

instax_BO-B_6lang.indb 2 4/13/2016 10:33:36 AM

Parts Name..............................................4

Before Use................................................5

Inserting/Charging the Battery........5

Inserting the Battery....................................... 5

Charging the Battery...................................... 6

Charging Indicator .......................................... 6

Loading the INSTAX mini Film Pack

...7

Turning on/o the Printer..................8

Checking Remaining Battery Life............... 8

Connecting and Printing....................9

When establishing connection for the rst

time:...................................................................... 9

When connection is already established:....

Reprinting............................................. 12

Deleting an Image............................. 13

Unloading a used INSTAX mini lm

pack......................................................... 13

About the LED Indication................ 14

SPECIFICATIONS ................................. 15

TROUBLE SHOOTING ........................ 16

IMPORTANT SAFETY NOTICE ......... 20

Handling the Battery ........................ 27

Contents

ENGLISH

After reading this User’s Guide, keep it in a safe, easy

to nd place where you can refer to it if needed.

instax_BO-B_6lang.indb 3 4/13/2016 10:33:36 AM

1Print exit 5USB connector 9Back cover

2POWER button 6Battery remaining LED 10 Battery cover

3REPRINT button 7Film remaining LED

4USB connector cover 8Back cover lock

Parts Name

instax_BO-B_6lang.indb 4 4/13/2016 10:33:37 AM

Before Use

Before using the printer, install the instax SHARE application on your device.

• When you are using an Android OS device, search for “instax SHARE” in the Google Play, then install the application.

* System requirements of an Android OS device: Android Ver 4.0.3 or later and Google Play are installed.

• When you are using an iOS device, search for“instax SHARE” in the App Store, then install the application.

* System requirements of an iOS device: iOS Ver 7.1 or later is installed.

You may not be able to print from some devices even if you have installed the instax SHARE application and your device

meets the requirements listed here.

Access instax SHARE website for the latest information on system requirements.

Inserting/Charging the Battery

Inserting the Battery

Push up the battery cover lock to

open the battery cover.

Insert the battery according to the arrow on it.

Make sure the yellow line on the battery aligns

with the mark on the printer.

Push the battery cover

lock until it clicks into

place.

~ Ÿ !

instax_BO-B_6lang.indb 5 4/13/2016 10:33:37 AM

Inserting/Charging the Battery (Continued)

Charging the Battery Charging Indicator

Indication Battery status/Action

Lights red (ON)

Flashes red (OFF) Charging is in progress.

Lights green (ON)

Flashes green (OFF)

Charging is more than half

completed.

Flashes green, then

goes off (OFF) Charging is completed.

Flashes green and

red alternately

An error is being occurred. Stop

charging.

Charging from a PC:

• Connect the printer and PC directly. Do not connect

them via a keyboard or USB hub.

• If the PC enters the sleep mode while charging is in

progress, charging will stop. If you continue charging,

resume the PC and reconnect the USB cable.

• You may not charge the printer from a PC depending

on your PC specifications, settings, or status.

Connect the printer and an AC power adapter supplied

with your smartphone using the supplied USB cable, then

connect the AC power adapter to an indoor power outlet.

The battery remaining LED indicates the battery charge

status. For details, see the table on the right column.

• Use an AC adapter to meet the rated output below:

DC 5.0 V/1000 mA

• You can print an image while charging is in progress.

• Charging time is approximately 90 minutes.

instax_BO-B_6lang.indb 6 4/13/2016 10:33:37 AM

Loading the INSTAX mini Film Pack

~Ÿ

Caution

Do not open the back cover until you have used up the film; otherwise, the rest of the film is exposed

and turns white. The film can no longer be used.

• When you load the film pack, never press the two rectangular holes on the back of the film pack.

• Never use a film pack beyond its shelf life; otherwise, it may damage the printer.

Use FUJIFILM instax mini Color Film only. No other type of film (e.g. FUJIFILM instax Digital Mobile

Printer Photo Pack) can be used.

Notes on the film pack

• Each FUJIFILM INSTAX mini film pack contains 1 black film protective cover and 10 film sheets.

• Do not remove the film pack from its inner bag before loading it into the printer.

• The film cover is ejected automatically when the back cover is closed.

For details, refer to the instructions and warnings on FUJIFILM INSTAX mini film.

Continued on the next page

Press down the back cover lock and slide it right to

open the back cover.

Hold both sides of the film pack, align the yellow marks on

the printer and the film pack, then insert it straight.

instax_BO-B_6lang.indb 7 4/13/2016 10:33:37 AM

Loading the INSTAX mini Film Pack

(Contunued)

⁄

Close the back cover. Make sure the

back cover lock clicks into place.

The film cover (black) is ejected

automatically when the back

cover is closed. Remove the film

cover from the print exit.

Turning on/o the Printer

Press and hold the POWER button for approx. 1 second

to turn the printer on or off.

Turning the printer on lights up the battery remaining

LED and it turns off after a certain period of time.

If no operation occurs for a certain period of time, the

printer turns off automatically.

Checking Remaining Battery Life

Use the battery remaining LED to check when turning

the printer on or while printing is in progress.

Indication Remaining battery life

Green At more than half capacity

Red Low. Charging the battery is

recommended. (See page 6.)

Printer turns off

after flashing red.

No battery capacity remains.

Charge the battery. (See page 6.)

instax_BO-B_6lang.indb 8 4/13/2016 10:33:37 AM

Connecting and Printing

Continued on the next page

Wireless LAN Setup for iOS Devices

When you are using an iOS device, follow the procedure

below to perform wireless LAN setup.

1. Select “ON”for“Wi-Fi”in the “Settings”menu of your

device.

2. Tap the network name (printer name) under“Choose

a Network”.

When establishing connection for

the first time:

Press and hold the POWER button for approx.

1 second to turn the printer on.

The battery remaining LED lights up and it

turns off after a certain period of time.

Start the downloaded application “instax SHARE”.

Select the picture to print or take a picture.

instax_BO-B_6lang.indb 9 4/13/2016 10:33:38 AM

⁄

Connecting and Printing (Continued)

Tap“Connect and print”.

When a printer is detected,

tap“Connect”. If multiple

printers are detected, select

the printer to connect from

the list.

Printer's identifier (SSID) is

located on the bottom of the

printer.

Enter the factory default

password (1111) or the one you

specified, then tap“OK”.

The printer starts printing.

To reset the password to the factory default

(1111), turn the printer on while holding the

REPRINT button.

When the film has been ejected (the

printer stops making a sound), grasp

the edge of the film, then take it out.

1 film remaining LED turns off every

time you print an image.

Before tapping“Connect

and print”, tapping on

the upper right displays

the edit menu. You can add

a template or adjust an

image on this menu.

Tap“Done”to exit from the

menu.

When printing, stabilize the

printer by putting it on a

steady place such as a desk.

INSTAX-1111

1111

instax_BO-B_6lang.indb 10 4/13/2016 10:33:39 AM

Andere Handbücher für instax SHARE SP-2

Inhaltsverzeichnis

Sprachen:

Andere FujiFilm Drucker Handbücher

FujiFilm

FujiFilm Apeos 7580 Bedienungsanleitung

FujiFilm

FujiFilm instax SQUARE Link Bedienungsanleitung

FujiFilm

FujiFilm PICTROGRAPHY 4500N Bedienungsanleitung

FujiFilm

FujiFilm instax mini Link 2 Bedienungsanleitung

FujiFilm

FujiFilm ApeosPort C3060 Bedienungsanleitung

FujiFilm

FujiFilm ApeosPrint C325 dw Bedienungsanleitung

FujiFilm

FujiFilm Apeos C325 z Bedienungsanleitung

FujiFilm

FujiFilm Pictrography 3500 Bedienungsanleitung

FujiFilm

FujiFilm Apeos C7070 Bedienungsanleitung

FujiFilm

FujiFilm CX-400 Bedienungsanleitung

FujiFilm

FujiFilm Apeos C7070 Bedienungsanleitung

FujiFilm

FujiFilm PICTOGRAPHY 3500 Bedienungsanleitung

FujiFilm

FujiFilm Frontier-S DX100 Bedienungsanleitung

FujiFilm

FujiFilm CX 3240 Bedienungsanleitung

FujiFilm

FujiFilm instax square Link Bedienungsanleitung

FujiFilm

FujiFilm Frontier DE100 Bedienungsanleitung

FujiFilm

FujiFilm Revoria Press EC1100 Bedienungsanleitung

FujiFilm

FujiFilm ApeosPort-VII 4021 Bedienungsanleitung

FujiFilm

FujiFilm instax SQUARE Link Bedienungsanleitung

FujiFilm

FujiFilm ApeosPort-VII C4421 Bedienungsanleitung

FujiFilm

FujiFilm instax SHARE SP-3 Bedienungsanleitung

FujiFilm

FujiFilm C 9070 9065 Bedienungsanleitung

FujiFilm

FujiFilm ApeosPort-V 5070 Bedienungsanleitung

FujiFilm

FujiFilm ASK-500 Handbuch

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung

FujiFilm instax SHARE SP-2 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken