Fujitsu DL7400Pro Bedienungsanleitung

FUJITSU DL7400Pro

DOT MATRIX PRINTER

USER'S MANUAL

READ THE ENTIRE MANUAL CAREFULLY BEFORE USING THIS PRODUCT.

INCORRECT USE OF THE PRODUCT MAY RESULT IN INJURY OR DAMAGE TO

USERS, BYSTANDERS OR PROPERTY.

While FUJITSU ISOTEC has sought to ensure the accuracy of all information in this manual,

FUJITSU ISOTEC assumes no liability to any party for any damage caused by any error or

omission contained in this manual, its updates or supplements, whether such errors or omissions

result from negligence, accident, or any other cause. In addition, FUJITSU ISOTEC assumes no

liability with respect to the application or use of any product or system in accordance with

descriptions or instructions contained herein; including any liability for incidental or

consequential damages arising therefrom. FUJITSU ISOTEC DISCLAIMS ALL WARRANTIES

REGARDING THE INFORMATION CONTAINED HEREIN, WHETHER EXPRESSED,

IMPLIED, OR STATUTORY.

FUJITSU ISOTEC reserves the right to make changes to any products described herein without

further notice and without obligation.

This Product is designed, developed and manufactured as contemplated for general use, including

without limitation, general office use, personal use, household use, and ordinary industrial use,

but is not designed, developed and manufactured as contemplated for use accompanying fatal

risks or dangers that, unless extremely high safety is secured, could lead directly to death,

personal injury, sever physical damage or other loss(hereinafter “High Safety Required Use”),

including without limitation, nuclear control in nuclear facility, aircraft flight control, air traffic

control, mass transport control, medical life support system, missile launch control in weapon

system. You shall not use this Product without securing the sufficient safety required for the High

Safety Required Use. If you wish to use this Product for High Safety Required Use, please

consult with our sales representatives in charge before such use.

This manual contains technology which is subject to the Foreign Exchange and Foreign Trade

Law of Japan. This manual should not be exported or transferred to foreign countries in any from

or method, or released to anyone other than the residents of Japan prior obtaining applicable

license from your local government or authorities and/ or the Ministry of Economy, Trade and

Industry of Japan in accordance with the above law.

IMPORTANT NOTE TO USERS

Using This Product in High-risk Situations

EXPORT CONTROL

User's Manual i

Following notes for United States are valid for

100-120V model only.

Federal Communications Commission

Radio Frequency Interference Statement

for United States Users

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15B of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of

the following measure:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC warning: Changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to

operate the equipment.

NOTES

1. Testing of this equipment was performed on model number

M33334A.

2. The use of an unshielded interface cable with the referenced device

is prohibited. The length of the parallel interface cable must be 3

meters (10 feet) or less. The length of the optional serial interface

cable must be 15 meters (50 feet) or less.

3. The length of the power cord must be 3 meters (10 feet) or less.

ii User's Manual

The contents of this manual may be revised without prior notice and

without obligation to incorporate changes and improvements into units

already shipped.

Every effort has been made to ensure that the information included here

is complete and accurate at the time of publication; however, Fujitsu

Isotec Limited cannot be held responsible for errors and omissions.

Printer model specifications differ with the power supply input voltage

(M33334A; 100-120 V or M33334B; 220-240 V).

KA02086-Y890-01EN DECEMBER 2015

reproduced or translated, stored in a database or retrieval system, or

transmitted, in any form or by any means, electronic, mechanical,

photocopying, recording, or otherwise, without the prior written

permission of Fujitsu Isotec Limited.

FUJITSU is a registered trademark and Fujitsu Creative Faces is a

trademark of Fujitsu Limited. Centronics is a trademark of Centronics

Data Computer Corporation. IBM PC and IBM Proprinter XL24E are

trademarks of International Business Machines Corporation. ESC/P2 is a

trademark of Seiko Epson Corporation. Microsoft is a registered

trademark and MS-DOS and Windows are trademarks of Microsoft

Corporation. Nimbus Sans is a registered trademark of URW

Unternehmensberatung Karow Rubow Weber GmbH, Hamburg.

Other product names mentioned in this manual may also be trademarks

of their respective companies.

TRADEMARK

ACKNOWLEDGEMENT

User's Manual iii

ABOUT THIS MANUAL

Thank you for buying the Fujitsu DL7400Pro dot matrix printer. You can

expect years of reliable service with very little maintenance. This manual

explains how to use your printer to full advantage. It is written for both

new and experienced printer users.

This manual describes how to install, set up, and use your printer and

printer options. It also explains how to keep the printer in good working

condition and what to do should something go wrong. Detailed

procedures are provided for first-time users. Experienced users can skip

some of the details, using the table of contents and chapter introductions

to locate information.

This manual has several appendixes, a glossary, and an index. Appendix

A lists supplies and additional documentation and information available

from your dealer or authorized Fujitsu representative. Fujitsu offices are

listed at the end of the manual.

This manual covers model DL7400Pro, a 136-column printer. Each

model has a 100-120 V (M33334A) or 220-240 V (M33334B) power

supply.

A LAN card, a user add-on option, can be installed only on printer

models with the Centronics parallel + USB interfaces. You must specify

these when purchasing the printer.

Other options include a cut sheet feeder can be added by yourself after

purchasing the printer.

DL7400Pro

Basic specifications

Print line at 10 cpi: 136 columns (DL7400Pro)

Interface: Centronics parallel + RS-232C

Centronics parallel + USB + LAN (LAN:user option)

Alternative specification

Power supply: 100-120 V (M33334A)

220-240 V (M33334B)

User add-on option

LAN card

Cut sheet feeder

Tractor unit

Sound proof cover

Large Stacker

Small paper table

cpi: characters per inch

PRINTER MODELS

AND OPTIONS

iv User's Manual

This manual is organized as follows:

Quick Reference summarizes everyday printer operations. After you

become familiar with the printer, use this section as a memory aid.

Chapter 1, Introduction, introduces the printer and identifies key

features and options that enhance the printer’s capabilities.

Chapter 2, Setting Up, gives step-by-step procedures for setting up the

printer for immediate use and identifies the main parts of the printer. If

this is your first printer, you should read the entire chapter before

attempting to use the printer.

Chapter 3, Paper Handling, explains how to load and use paper with

your printer.

Chapter 4, Printing, covers basic printing operations. This chapter

describes everyday operations from the printer’s control panel, such as

loading paper and selecting print features, in detail. After you become

more familiar with the printer, use Quick Reference at the beginning of

the manual to refresh your memory as needed.

Chapter 5, Using Setup Mode, describes how to change the printer’s

optional settings, such as print features, hardware options, and top-of-

form. Most settings only affect print features such as the typestyle and

page format. Note that certain settings directly affect hardware and

software compatibility. Refer to this chapter as indicated in Chapter 2 or

as required.

Chapter 6, Maintenance, explains basic maintenance procedures for

this printer.

Chapter 7, Trouble-Shooting, describes problem-solving techniques.

Before you contact your dealer for help, check the list of problems and

solutions provided in this chapter.

Chapter 8, Installing Options, describes the options available for the

printer and explains how to install them.

At the end of this manual, you will find several appendixes, a glossary,

and an index. Appendix A gives order numbers for printer supplies,

options, and publications. Other appendixes provide additional technical

information about the printer.

ORGANIZATION

User's Manual v

Special information, such as warnings, cautions, and notes, are indicated

as follows:

WARNING

A WARNING indicates that personal injury may result if you do not

follow a procedure correctly.

CAUTION

A CAUTION indicates that damage to the printer may result if you do not

follow a procedure correctly.

NOTE

A NOTE provides “how-to” tips or suggestions to help you perform

a procedure correctly. NOTEs are particularly useful for first-time

users.

For Experienced Users:

If you are familiar with this printer or with dot matrix printers in general,

this information will help you use the manual effectively.

CONVENTIONS

viii User's Manual

Warning symbols

Various graphic symbols are used in this manual. They serve as signs to help users of this product use

the product safely and correctly as well as prevent damage and personal injury to the users or bystanders.

The following tables show and explain each symbol. Be sure that you understand the meaning of each

symbol before reading the manual.

WARNING CAUTION

A WARNING indicates that death or serious

personal injury may result if you do not follow a

procedure correctly.

A CAUTION indicates that personal injury or

property damage may result if you do not follow a

procedure correctly.

Examples and explanations of graphic symbols

indicates a warning or caution item. By itself, the image in this

symbol suggests the meaning of the warning or caution (the example

on the left is a caution of possible electric shock).

indicates a prohibited action. The image in or beside this symbol

expresses the prohibited action (the example on the left indicates that

disassembly is prohibited).

indicates a direction that must be observed. The image in this

symbol shows the direction (the example on the left shows the

direction in which a power plug is disconnected from an outlet).

Caution: Hot

This symbol and accompanying statement indicate a risk of injury from

a hot object.

Caution: Flammable

This symbol and accompanying statement indicate a risk of fire.

Do not touch

This symbol and accompanying statement indicate a risk of injury from

touching part of the equipment.

Do not disassemble

This symbol and accompanying statement indicate a risk of injury,

such as from electric shock, caused by disassembling the equipment.

General prohibited

action

This symbol and accompanying statement indicate a general prohibited

action.

General caution

This symbol and accompanying statement indicate a general caution.

User's Manual ix

Notes on Safety

WARNING

WARNING

Do not place a container containing water, such as a vase, potted plant, and drinking glass,

or a metal object on or near the printer.

Otherwise, electric shock or fire may result.

Do not place the printer in a humid or dusty area, in an area with explosive fumes, an area

with poor ventilation or close to a fire.

Otherwise, electric shock or fire may result.

Use only one of the power cords included with this product, for this product. Do not use

any other power cord for this product.

Otherwise, electric shock or fire may result.

Do not use this product in an area exposed to a high level of moisture, such as a bathroom

and shower room.

Otherwise, electric shock or fire may result.

x User's Manual

WARNING

When mounting or removing an optional device or component, turn off the power to the

printer and personal computer and disconnect their power plugs from the outlets before

performing the work.

Otherwise, electric shock may result.

Connect only Fujitsu-recommended optional devices and components.

Otherwise, electric shock, fire, or failure may result.

CAUTION

Do not block openings in the printer (e.g., ventilation openings).

If ventilation openings are blocked, heat accumulates inside the printer, possibly resulting

in a fire.

Do not place a heavy object on the printer. Also, do not subject the printer to shocks.

Otherwise, the printer may become unbalanced, causing it to fall, and possibly resulting in

personal injury.

Do not place the printer in an area exposed to strong vibration or an unstable area such as

on a slope.

Otherwise, the printer may fall or topple, possibly resulting in personal injury.

Do not leave the printer in an area exposed to direct sunlight for a long time, such as inside

a car under the sun or any other area subjected to high temperatures.

Otherwise, the printer surface heats up, possibly melting covers or resulting in other

deformities, or the inside of the printer may become extremely hot, possibly resulting in

fire.

Before moving the printer, be sure to disconnect the power plug from the outlet and

disconnect all connected cables from the printer.

Otherwise, the power cord may be damaged, possibly resulting in electric shock or fire, or

the printer may fall or topple, possibly resulting in personal injury.

Before connecting or disconnecting a printer cable, be sure to turn off the power to the

printer and personal computer.

Performing that and related work without the power turned off may result in a personal

computer or printer failure.

Inhaltsverzeichnis

Andere Fujitsu Drucker Handbücher

Fujitsu

Fujitsu DL1150 Bedienungsanleitung

Fujitsu

Fujitsu DX2300 Bedienungsanleitung

Fujitsu

Fujitsu fi-4x20 SERIES Konfigurationshandbuch

Fujitsu

Fujitsu FTP-621CT001 Bedienungsanleitung

Fujitsu

Fujitsu VM4 Bedienungsanleitung

Fujitsu

Fujitsu FTP-628 Series Bedienungsanleitung

Fujitsu

Fujitsu DL3800 Pro Bedienungsanleitung

Fujitsu

Fujitsu FTP-62HWSL001 SERIES Bedienungsanleitung

Fujitsu

Fujitsu fi-71X0 Konfigurationshandbuch

Fujitsu

Fujitsu DL3100 Bedienungsanleitung

Fujitsu

Fujitsu FI-6130 Konfigurationshandbuch

Fujitsu

Fujitsu ApeosPrint C4030 Bedienungsanleitung

Fujitsu

Fujitsu DL5600 Bedienungsanleitung

Fujitsu

Fujitsu DotMax 24 series Bedienungsanleitung

Fujitsu

Fujitsu FTP-628WSL220 Series Bedienungsanleitung

Fujitsu

Fujitsu fi-7480 Bedienungsanleitung

Fujitsu

Fujitsu FTP-627MCL103 Bedienungsanleitung

Fujitsu

Fujitsu fi-4530C Konfigurationshandbuch

Fujitsu

Fujitsu FTP-628WSL210A Bedienungsanleitung

Fujitsu

Fujitsu DL1100 Bedienungsanleitung

Fujitsu

Fujitsu DPMG9 Bedienungsanleitung

Fujitsu

Fujitsu Print partner 14 AV Bedienungsanleitung

Fujitsu

Fujitsu DL7400 Bedienungsanleitung

Fujitsu

Fujitsu FTP-638WSL Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung