Fujitsu M3099EX/EH Installations- und Betriebshandbuch

M3099EX/EH IMAGE SCANNER

OEM MANUAL

C150-E047-02EN

M3099EX/EH IMAGE SCANNER

OEM MANUAL

M3099EX/EH OEM Manual

Edition Date published Revised contents

01 January, 1996 First edition

02 April, 1996 Setup mode etc. revised

Specification No. C150-E047-02EN

REVISION RECORD

The contents of this manual may be revised without prior notice.

Printed in Japan.

No part of this manual may be reproduced in any form without permission.

Address your comments and inquiries on this manual to:

FUJITSU COMPUTER PRODUCTS OF

AMERICA, INC.

2904 Orchard Parkway, San Jose.

California 95134-2022, U.S.A.

TEL: 1-408-432-6333

FAX: 1-408-432-3908

FUJITSU AUSTRALIA LIMITED

475 Victoria Avenue Chatswood.

N.S.W 2067, AUSTRALIA

TEL: 61-2-410-4555

FAX: 61-2-411-8603

FUJITSU CANADA, INC.

2800 Matheson Blvd. East, Mississauga.

Ontario 4X5, CANADA

TEL: 1-905-602-5454

FAX: 1-905-602-5457

FUJITSU DEUTSCHLAND GmbH.

Frankfurter Ring 211,

8000 Munchen 40, F.R, GERMANY

TEL: 49-89-32378-0

FAX: 49-89-32378-100

FUJITSU ESPANA, S.A

Edificio torre Europa

Paseo de la Castellana 95 Madrid 28046, SPAIN

TEL: 34-1-581-8400

FAX: 34-1-581-8125

FUJITSU EUROPE LTD.

2, Longwalk Road, Stockley Park, Uxbridge

Middlesex, UB11 1AB, U.K

TEL: 44-81-573-4444

FAX: 44-81-573-2643

TLX: 263871

FUJITSU FRANCE S.A.

Batiment Aristote, 17 rue Olof palme

94006 Creteil cedex, FRANCE

TEL: 33-14-513-1616

FAX: 33-14-399-0700

FUJITSU HONG KONG Limited

Room 2521, Sum Hung Kai Centre

30 Harbour Road Wanchal, Hong Kong

TEL: 852-827-5780

FAX: 852-827-4724

TLX: 62667

FUJITSU ITALIA S.p.A.

Via Melchiorre Gioia, No. 8-20124 Milano, ITALY

TEL: 39-2-63651

FAX: 39-2-6572257

FUJITSU NORDIC AB

Kung Hans vag, S-191 76 Sollentuna, SWEDEN

TEL: 46-8-626-6000

FAX: 46-8-626-6711

FUJITSU LIMITED

International Operations

Marunouchi 1-6-1, Chiyoda-ku, Tokyo 100, JAPAN

TEL: (81-3) 3216-3211

FAX: (81-3) 3213-7174

TLX: J22833

Cable: “FUJITSU LIMITED TOKYO”

M3099EX/EH OEM Manual i

Preface

This manual provides technical information required to use the original

equipment manufacturing (OEM) M3099EX/EH image scanner. The

manual is organized as shown below.

Chapter 1 Overview

Chapter 1 provides the scanner features, configuration, and operation.

Chapter 2 Specifications

Chapter 2 provides general, electrical, environmental, physical, and

option specifications.

Chapter 3 Interface Specifications

Chapter 3 provides control interface, and video interface specifications.

Chapter 4 Basic Operation

Chapter 4 provides power switch operation, opening/closing the upper

transport unit, operator panel arrangement and functions, messages,

loading document, and replacement of parts.

Chapter 5 Error Processing and Recovery

Chapter 5 provides how to handles temporary errors and equipment

errors and what the operator should do to recovery.

ii M3099EX/EH OEM Manual

Chapter 6 Document Specification

Chapter 6 provides document specifications (size, type, limitations,

grounding color area, drop-out color, and job separation sheet) for the

scanner.

Chapter 7 Consumables and Accessories

Chapter 7 provides consumables and accessories.

Chapter 8 Cleaning

Chapter 8 provides cleaning locations and frequencies, cleaning tools,

and procedures.

It is recommended that you thoroughly familiarize yourself with the

contents of this manual before attempting to use the scanner. Operators

in particular must have read Chapter 4, “Basic Operation.”

Special information, such as warnings, cautions are indicated as follows:

WARNING

A WARNING indicattes that personal injury may result if you do not

follow a procedure correctly.

CAUTION

A CAUTION indicates that damage to the scanner may result if you do

not follow a procedure correctly.

NOTICE

A NOTICE provides “how-to” tips or suggestions to help you perform a

procedure correctly. NOTEs are particularly useful for first-time users.

Conventions

M3099EX/EH OEM Manual iii

Contents

CHAPTER 1 OVERVIEW ................................................................................... 1-1

Scanner Types .............................................................................. 1-1

Features ........................................................................................ 1-4

Configuration ............................................................................... 1-5

Configuration of the scanner .................................................. 1-5

Arrangement of units ............................................................. 1-6

Operation Overview ..................................................................... 1-7

Operation of the mechanism unit .......................................... 1-7

Operation of the control unit ................................................. 1-8

CHAPTER 2 SPECIFICATIONS ......................................................................... 2-1

General ......................................................................................... 2-1

Electrical Specifications ................................................................ 2-2

Environmental Specifications ....................................................... 2-2

Physical Specifications .................................................................. 2-3

Option Specifications ................................................................... 2-6

CHAPTER 3 INTERFACE SPECIFICATIONS ...................................................... 3-1

Control Interface .......................................................................... 3-1

Connection specifications ...................................................... 3-1

Control interface signals ......................................................... 3-2

Driver/receiver ....................................................................... 3-3

Timing................................................................................... 3-4

Video Interface ............................................................................. 3-5

Video interface signals ............................................................ 3-5

Driver/receiver ....................................................................... 3-6

Data transfer .......................................................................... 3-7

Timing................................................................................. 3-12

Command and Response ............................................................ 3-14

Basic command/response sequence....................................... 3-14

Command............................................................................ 3-17

iv M3099EX/EH OEM Manual

Responses............................................................................. 3-61

Command/response correspondence .................................... 3-91

Command/Response Timing Chart ............................................ 3-93

CHAPTER 4 BASIC OPERATION ...................................................................... 4-1

Power Switch Operation............................................................... 4-1

Opening the Upper Transport Unit ............................................. 4-2

Closing the Upper Transport Unit ............................................... 4-2

Operator Panel Arrangement and Functions................................. 4-3

Operator panel arrangement .................................................. 4-3

Operator panel functions ....................................................... 4-3

LCD display .......................................................................... 4-5

Button specification and reading mode setting ....................... 4-8

Operation display................................................................. 4-23

Buzzer Functions ........................................................................ 4-25

Message List ............................................................................... 4-25

Loading Document .................................................................... 4-26

Lamp Replacement ..................................................................... 4-28

Roller ASY Replacement ............................................................. 4-33

Pick Roller Replacement ............................................................. 4-35

Belt Replacement........................................................................ 4-36

Pad Replacement ........................................................................ 4-38

CHAPTER 5 ERROR PROCESSING AND RECOVERY ........................................ 5-1

Device and Operator Actions for Temporary Errors ..................... 5-1

Device and Operator Actions for Equipment Errors ..................... 5-4

CHAPTER 6 DOCUMENT SPECIFICATION ....................................................... 6-1

Document Size ............................................................................. 6-1

Document Quality ....................................................................... 6-2

Document type ...................................................................... 6-2

Ream weight .......................................................................... 6-2

Precautions ............................................................................ 6-2

Document Limitations ................................................................. 6-4

Areas that must not be perforated .......................................... 6-4

Print prohibit areas on the front and back surfaces ................. 6-5

M3099EX/EH OEM Manual v

Grounding Color Area.................................................................. 6-6

Drop-out Color ............................................................................ 6-7

Print density measurement ..................................................... 6-7

Drop-out color standards ....................................................... 6-7

Job Separation Sheet ..................................................................... 6-8

Shape ..................................................................................... 6-8

Document type ...................................................................... 6-8

CHAPTER 7 CONSUMABLES AND ACCESSORIES .......................................... 7-1

Consumables ................................................................................ 7-1

Accessories .................................................................................... 7-2

CHAPTER 8 CLEANING.................................................................................... 8-1

Cleaning Locations and Frequencies ............................................. 8-1

Cleaning Tools ............................................................................. 8-1

Procedure ..................................................................................... 8-2

Cleaning the front-side lamp .................................................. 8-2

Cleaning the rollers ................................................................ 8-5

Cleaning the transport paths .................................................. 8-6

Cleaning the glass surface ....................................................... 8-7

Cleaning the sensors ............................................................... 8-7

APPENDIX A ENDORSER ...................................................................................A-1

A1. Specification .......................................................................... A-1

A2. Panel operation ...................................................................... A-2

A2.1 How to set endorser ON (or OFF)...............................A-2

A2.2 How to set the initial number ......................................A-2

A2.3 How to set the print number reset condition ................A-3

A2.4 How to reset print number manually ........................... A-3

A2.5 How to reset print head life counter ............................. A-4

A2.6 How to test the printing by the operator panel

operation ...................................................................... A-4

A3. Print head handling................................................................A-5

A3.1 Replacing the print head ..............................................A-5

A3.2 Print head position adjustment ....................................A-6

vi M3099EX/EH OEM Manual

APPENDIX B SETUP MODE ............................................................................... B-1

B1. Activating the setup mode ...................................................... B-1

B2. Operational transition in the setup mode ............................... B-1

B3. Contents of the setup mode ................................................... B-2

B3.1 Setting double feed detection ....................................... B-3

B3.2 Setting IPC-2 pre-set mode .......................................... B-4

B3.3 Reset of abrasion counter ............................................. B-6

B3.4 Setting buzzer ............................................................... B-7

B3.5 Setting pre-pick ............................................................ B-7

B3.6 Adjusting LCD contrast ............................................... B-8

B3.7 Setting pick speed......................................................... B-8

B3.8 Setting initial value of endorser .................................... B-9

B3.9 Setting reset method of endorser .................................. B-9

B3.10 Reset of endorser .................................................... B-10

B3.11 Reset of ink counter ................................................ B-10

B3.12 Setting RS232C transfer rate .................................. B-10

B3.13 Setting picking start time ........................................ B-10

B3.14 Setting picking time................................................ B-11

B3.15 Setting time-out limit ............................................. B-11

B3.16 Setting hopper time ................................................ B-12

B3.17 Setting heater control ............................................. B-13

APPENDIX C Separation pressure adjustment ................................................ C-1

GLOSSARY OF TERMS .................................................................................................. GL-1

INDEX ...................................................................................................IN-1

M3099EX/EH OEM Manual vii

Figures

1.1 500 sheets hopper type ......................................................... 1-2

1.2 1000 sheets hopper type ....................................................... 1-3

1.3 Scanner block diagram ......................................................... 1-5

1.4 Arrangement of units ............................................................ 1-6

1.5 Control block diagram ......................................................... 1-8

2.1 Dimensions of 500 sheets hopper type ................................. 2-3

2.2 Dimensions of 1000 sheets hopper type ............................... 2-4

2.3 Service areas ......................................................................... 2-5

3.1 Control interface signal lines ................................................ 3-2

3.2 Video interface signal lines ................................................... 3-5

3.3 Scanning direction ................................................................ 3-7

3.4 Scanning data assignment ..................................................... 3-7

3.5 Basic command/response sequence ..................................... 3-14

3.6 Command/response sequence for initialization ................... 3-84

3.7 Command/response sequence for the read operation (1) .... 3-86

3.8 Command/response sequence for the read operation (2) .... 3-88

3.9 Command/response sequence for the read operation (3) .... 3-90

3.10 CLEAR command sequence ............................................... 3-94

3.11 CONTROL command sequence (1/4) to (4/4) .................. 3-95

3.12 START command sequence ............................................... 3-99

3.13 READ command sequence ............................................... 3-100

3.14 SENSE command sequence .............................................. 3-101

3.15 RETURN SENSE command sequence ............................ 3-102

4.1 Power switch location ........................................................... 4-1

4.2 Operator panel arrangement ................................................. 4-3

6.1 Document size...................................................................... 6-1

6.2 Areas that must not be perforated ......................................... 6-4

6.3 Print prohibit areas on the front and back surface................. 6-5

6.4 Grounding color area ........................................................... 6-6

6.5 Spectrum band ..................................................................... 6-7

6.6 Sharp of document ............................................................... 6-8

A.1 Print area.............................................................................. A-1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fujitsu Scanner Handbücher

Fujitsu

Fujitsu ScanSnap iX100 Montageanleitung

Fujitsu

Fujitsu fi-7140 Bedienungsanleitung

Fujitsu

Fujitsu S510 - ScanSnap - Document Scanner Bedienungsanleitung

Fujitsu

Fujitsu M3092DC Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Fujitsu

Fujitsu SCANPARTNER 600C Bedienungsanleitung

Fujitsu

Fujitsu SCANPARTNER 600C Bedienungsanleitung

Fujitsu

Fujitsu S1500 - ScanSnap Deluxe Bundle Leitfaden

Fujitsu

Fujitsu fi-4220C2 Konfigurationshandbuch

Fujitsu

Fujitsu S510M - ScanSnap - Document Scanner Handbuch

Fujitsu

Fujitsu S1500M - ScanSnap - Document Scanner Bedienungsanleitung

Fujitsu

Fujitsu ScanZen EK6 Konfigurationshandbuch

Fujitsu

Fujitsu S510M - ScanSnap - Document Scanner Konfigurationshandbuch

Fujitsu

Fujitsu ScanSnap fi-5110EOXM Bedienungsanleitung

Fujitsu

Fujitsu N7100 Handbuch

Fujitsu

Fujitsu PA03360-B505 - ScanSnap S500 Handbuch

Fujitsu

Fujitsu ScanPartner 15C Installations- und Betriebshandbuch

Fujitsu

Fujitsu ScanSnap iX500 Bedienungsanleitung

Fujitsu

Fujitsu fi-65F Handbuch

Fujitsu

Fujitsu fi-4110CU Series Konfigurationshandbuch

Fujitsu

Fujitsu ScanSnap N1800 Handbuch

Fujitsu

Fujitsu ScanSnap iScanner fi-6010N Konfigurationshandbuch

Fujitsu

Fujitsu FI-4860C2 Konfigurationshandbuch

Fujitsu

Fujitsu 6240 - fi - Document Scanner Handbuch

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung

Visioneer

Visioneer CardReader 100 Kurzanleitung

Rohde & Schwarz

Rohde & Schwarz TSME6 Bedienungsanleitung