Fujitsu PRIMERGY RX1330 M1 Bedienungsanleitung

Upgrade and Maintenance Manual - English

FUJITSU Server PRIMERGY RX1330 M1

Upgrade and Maintenance Manual

May 2015

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected]su.com.

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

RX1330 M1

Upgrade and Maintenance Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

Upgrade and Maintenance Manual

RX1330 M1

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market: About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://jp.fujitsu.com/platform/server/primergy/harddisk/

RX1330 M1

Upgrade and Maintenance Manual

Only for the Japanese market:

Shielded LAN cables should be used in this product.

Only for the Japanese market:

IAlthough described in this manual, some sections do not apply to the

Japanese market. These options and routines include:

– CSS (Customer Self Service)

– USB Flash Module (UFM)

Upgrade and Maintenance Manual

RX1330 M1

Version history

Issue number Reason for update

1.0 / August 2014 Initial release

2.0 / September 2014 Max load label removed from photos

3.0 / May 2015 Section 11.2.7 note added, cable tie for front VGA

cable added, iRMC microSD card added

RX1330 M1

Upgrade and Maintenance Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

1.1 Notational conventions . . . . . . . . . . . . . . . . . . . . 20

2 Before you start . . . . . . . . . . . . . . . . . . . . . . . . 21

2.1 Classification of procedures . . . . . . . . . . . . . . . . . 23

2.1.1 Customer Replaceable Units (CRU) . . . . . . . . . . . . . . . 23

2.1.2 Upgrade and Repair Units (URU) . . . . . . . . . . . . . . . . 24

2.1.3 Field Replaceable Units (FRU) . . . . . . . . . . . . . . . . . 25

2.2 Average task duration . . . . . . . . . . . . . . . . . . . . . 26

2.3 Tools you need at hand . . . . . . . . . . . . . . . . . . . . 27

2.4 Documents you need at hand . . . . . . . . . . . . . . . . . 28

3 Important information . . . . . . . . . . . . . . . . . . . . . 31

3.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 31

3.2 ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.3 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.4 FCC Class A Compliance Statement . . . . . . . . . . . . . 40

3.5 Environmental protection . . . . . . . . . . . . . . . . . . . 41

4 Basic hardware procedures . . . . . . . . . . . . . . . . . . 43

4.1 Using diagnostics information . . . . . . . . . . . . . . . . 43

4.1.1 Locating the defective server . . . . . . . . . . . . . . . . . . 43

4.1.2 Determining the error class . . . . . . . . . . . . . . . . . . . 44

4.1.2.1 Global Error indicator . . . . . . . . . . . . . . . . . . . . 44

4.1.2.2 Customer Self Service (CSS) indicator . . . . . . . . . . . 44

4.1.3 Locating the defective component . . . . . . . . . . . . . . . . 45

4.1.3.1 Local diagnostic indicators on the system board . . . . . . . 45

4.2 Shutting down the server . . . . . . . . . . . . . . . . . . . 45

Upgrade and Maintenance Manual

RX1330 M1

Contents

4.3 Disconnecting the server from the mains . . . . . . . . . . . 46

4.4 Getting access to the component . . . . . . . . . . . . . . . 47

4.4.1 Extending the server out of the rack . . . . . . . . . . . . . . . 48

4.4.2 Removing the server from the rack . . . . . . . . . . . . . . . . 49

4.4.3 Removing the top cover . . . . . . . . . . . . . . . . . . . . . . 51

4.5 Reassembling . . . . . . . . . . . . . . . . . . . . . . . . . . 52

4.5.1 Installing the top cover . . . . . . . . . . . . . . . . . . . . . . 52

4.5.2 Mounting the server in the rack . . . . . . . . . . . . . . . . . . 53

4.5.3 Sliding the server into the rack . . . . . . . . . . . . . . . . . . 55

4.6 Connecting the server to the mains . . . . . . . . . . . . . . 55

4.7 Switching on the server . . . . . . . . . . . . . . . . . . . . . 57

4.8 Handling riser modules . . . . . . . . . . . . . . . . . . . . . 58

4.8.1 Removing a riser module . . . . . . . . . . . . . . . . . . . . . 58

4.8.2 Installing a riser module . . . . . . . . . . . . . . . . . . . . . . 60

5 Basic software procedures . . . . . . . . . . . . . . . . . . . 63

5.1 Starting the maintenance task . . . . . . . . . . . . . . . . . 63

5.1.1 Suspending BitLocker functionality . . . . . . . . . . . . . . . . 63

5.1.2 Disabling SVOM boot watchdog functionality . . . . . . . . . . . 64

5.1.2.1 Viewing boot watchdog settings . . . . . . . . . . . . . . . . 64

5.1.2.2 Configuring boot watchdog settings . . . . . . . . . . . . . . 65

5.1.3 Removing backup and optical disk media . . . . . . . . . . . . 66

5.1.4 Verifying and configuring the backup software solution . . . . . . 67

5.1.5 Note on server maintenance in a Multipath I/O environment . . . 67

5.1.6 Switching on the ID indicator . . . . . . . . . . . . . . . . . . . 70

5.2 Completing the maintenance task . . . . . . . . . . . . . . . 71

5.2.1 Updating or recovering the system board BIOS and iRMC . . . . 71

5.2.1.1 Updating or recovering the system board BIOS . . . . . . . . 71

5.2.1.2 Updating or recovering the iRMC . . . . . . . . . . . . . . . 71

5.2.2 Verifying system information backup / restore . . . . . . . . . . 73

5.2.3 Updating RAID controller firmware . . . . . . . . . . . . . . . . 74

5.2.4 Enabling Option ROM scan . . . . . . . . . . . . . . . . . . . . 75

5.2.5 Verifying and configuring the backup software solution . . . . . . 76

5.2.6 Resetting the boot retry counter . . . . . . . . . . . . . . . . . 77

5.2.6.1 Viewing the boot retry counter . . . . . . . . . . . . . . . . 77

5.2.6.2 Resetting the boot retry counter . . . . . . . . . . . . . . . . 77

5.2.7 Enabling SVOM boot watchdog functionality . . . . . . . . . . . 78

RX1330 M1

Upgrade and Maintenance Manual

Contents

5.2.8 Enabling replaced components in the system BIOS . . . . . . . 79

5.2.9 Verifying the memory mode . . . . . . . . . . . . . . . . . . . 80

5.2.10 Verifying the system time settings . . . . . . . . . . . . . . . . 80

5.2.11 Viewing and clearing the System Event Log (SEL) . . . . . . . 81

5.2.11.1 Viewing the SEL . . . . . . . . . . . . . . . . . . . . . . . 81

5.2.11.2 Clearing the SEL . . . . . . . . . . . . . . . . . . . . . . . 82

5.2.12 Updating the NIC configuration file in a Linux environment . . . 83

5.2.13 Resuming BitLocker functionality . . . . . . . . . . . . . . . . 84

5.2.14 Performing a RAID array rebuild . . . . . . . . . . . . . . . . . 85

5.2.15 Looking up changed MAC / WWN addresses . . . . . . . . . . 85

5.2.15.1 Looking up MAC addresses . . . . . . . . . . . . . . . . . 86

5.2.15.2 Looking up WWN addresses . . . . . . . . . . . . . . . . . 86

5.2.16 Using the Chassis ID Prom Tool . . . . . . . . . . . . . . . . . 87

5.2.17 Configuring LAN teaming . . . . . . . . . . . . . . . . . . . . 88

5.2.17.1 After replacing / upgrading LAN controllers . . . . . . . . . 88

5.2.17.2 After replacing the system board . . . . . . . . . . . . . . . 89

5.2.18 Switching off the ID indicator . . . . . . . . . . . . . . . . . . 89

5.2.19 Performing a fan test after replacing a defective fan . . . . . . 89

6 Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . 91

6.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . 92

6.2 Standard power supply . . . . . . . . . . . . . . . . . . . . 93

6.2.1 Replacing the standard power supply unit . . . . . . . . . . . . 93

6.2.1.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 93

6.2.1.2 Removing the defective standard power supply unit . . . . . 93

6.2.1.3 Installing the new standard power supply unit . . . . . . . . 95

6.2.1.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 96

6.3 Redundant power supply . . . . . . . . . . . . . . . . . . . 97

6.3.1 Installing a hot-plug power supply unit . . . . . . . . . . . . . . 97

6.3.1.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 97

6.3.1.2 Removing the dummy cover . . . . . . . . . . . . . . . . . 97

6.3.1.3 Installing a hot-plug power supply unit . . . . . . . . . . . . 98

6.3.1.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . 99

6.3.2 Removing a hot-plug power supply unit . . . . . . . . . . . . . 100

6.3.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 102

6.3.2.2 Removing a hot-plug power supply unit . . . . . . . . . . . 102

6.3.2.3 Installing the dummy cover . . . . . . . . . . . . . . . . . . 103

6.3.3 Replacing a hot-plug power supply unit . . . . . . . . . . . . . 103

6.3.3.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 104

Upgrade and Maintenance Manual

RX1330 M1

Contents

6.3.3.2 Removing the defective hot-plug power supply unit . . . . . 104

6.3.3.3 Installing the new hot-plug power supply unit . . . . . . . . 105

6.3.3.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 105

6.3.4 Replacing the power distribution board . . . . . . . . . . . . . 105

6.3.4.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 105

6.3.4.2 Removing the defective power distribution board . . . . . . 106

6.3.4.3 Installing the new power distribution board . . . . . . . . . 107

6.3.4.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 108

6.4 Converting a standard power supply to a redundant power

supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

6.4.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 109

6.4.2 Removing the standard power supply unit . . . . . . . . . . . 109

6.4.3 Installing the upgrade kit . . . . . . . . . . . . . . . . . . . . 110

6.4.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 114

7 Hard disk drives / solid state drives . . . . . . . . . . . . . 115

7.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . 116

7.2 2.5-inch HDD/SSD configurations . . . . . . . . . . . . . . 117

7.2.1 Equipping the 2.5-inch HDD/SSD bays . . . . . . . . . . . . . 117

7.2.2 Configuration with up to four HDD/SSD modules . . . . . . . . 117

7.2.3 Configuration with up to eight HDD/SSD modules . . . . . . . 118

7.2.4 Configuration with up to 10 HDD/SSD modules . . . . . . . . 119

7.2.5 Installing 2.5-inch HDD/SSD modules . . . . . . . . . . . . . 120

7.2.5.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 120

7.2.5.2 Removing a 2.5-inch HDD/SSD dummy module . . . . . . 120

7.2.5.3 Installing a 2.5-inch HDD/SSD module . . . . . . . . . . . 121

7.2.5.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 122

7.2.6 Removing 2.5-inch HDD/SSD modules . . . . . . . . . . . . . 122

7.2.6.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 122

7.2.6.2 Removing a 2.5-inch HDD/SSD module . . . . . . . . . . 123

7.2.6.3 Installing a 2.5-inch HDD/SSD dummy module . . . . . . . 124

7.2.6.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 124

7.2.7 Replacing a 2.5-inch HDD/SSD module . . . . . . . . . . . . 124

7.2.7.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 125

7.2.7.2 Removing the defective 2.5-inch HDD/SSD module . . . . 125

7.2.7.3 Installing the new 2.5-inch HDD/SSD module . . . . . . . . 125

7.2.7.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 125

Andere Handbücher für PRIMERGY RX1330 M1

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY RX200 S3 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY RX2520 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX400 S1 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY H200 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1330 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S6 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY ServerView Suite Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1320 M4 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX100 S4 Leitfaden

Fujitsu

Fujitsu PRIMERGY 400 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S6 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX2560 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX300 S8 Bedienungsanleitung

Fujitsu

Fujitsu 1PRIMERGY RX600 S4 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5120 Installationsanleitung

Fujitsu

Fujitsu Primergy RX300 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX120 S3p Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX140 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M5000 Installationsanleitung

Fujitsu

Fujitsu SPARC M10-4 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung