Fujitsu Primergy RX300 S3 Betriebsanleitung

PRIMERGY RX300 S3

Service Supplement

Edition June 2007

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

RX300 S3 Service Supplement

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Overview of the documentation . . . . . . . . . . . . . . . . . 5

1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . 8

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 17

4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 17

4.2 Replacing the operating panel . . . . . . . . . . . . . . . . 17

4.3 Replacing USB module . . . . . . . . . . . . . . . . . . . . 20

4.4 Replacing the Power backplane . . . . . . . . . . . . . . . . 23

4.5 Replacing the hot-plug PCI board . . . . . . . . . . . . . . . 25

4.5.1 Removing a defective hot-plug PCI board . . . . . . . . . . . . 25

4.5.2 Installing a new hot-plug PCI board . . . . . . . . . . . . . . . 27

4.6 Replacing the SAS backplane/expander board . . . . . . . 29

4.7 Replacing the HDD card . . . . . . . . . . . . . . . . . . . . 32

4.7.1 Removing the 2.5“ HDD cage . . . . . . . . . . . . . . . . . . 32

4.7.2 Replacing the HDD backplane . . . . . . . . . . . . . . . . . . 34

4.7.2.1 Removing the cards . . . . . . . . . . . . . . . . . . . . . 34

4.7.2.2 Installing the cards . . . . . . . . . . . . . . . . . . . . . . 35

4.7.3 Installing the 2.5“ HDD cage . . . . . . . . . . . . . . . . . . . 37

4.8 Fan box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

4.8.1 Removing the fan box . . . . . . . . . . . . . . . . . . . . . . 38

4.8.2 Installing the fan box . . . . . . . . . . . . . . . . . . . . . . . 41

4.9 Replacing the IDTemp Combo . . . . . . . . . . . . . . . . . 43

4.10 Replacing the system board . . . . . . . . . . . . . . . . . . 46

5 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

5.1 Board layouts . . . . . . . . . . . . . . . . . . . . . . . . . . 51

5.1.1 Operating panel . . . . . . . . . . . . . . . . . . . . . . . . . . 51

5.1.2 USB panel board . . . . . . . . . . . . . . . . . . . . . . . . . 51

5.1.3 Power Backplane . . . . . . . . . . . . . . . . . . . . . . . . . 52

5.1.4 SAS Backplane . . . . . . . . . . . . . . . . . . . . . . . . . . 53

5.1.4.1 Backplane for 3.5“ HDDs . . . . . . . . . . . . . . . . . . . 53

5.1.4.2 Backplane for 2.5“ HDDs . . . . . . . . . . . . . . . . . . . 54

5.1.5 Connector card . . . . . . . . . . . . . . . . . . . . . . . . . . 55

5.1.6 HDD backplane . . . . . . . . . . . . . . . . . . . . . . . . . . 55

5.1.7 IDTemp Combo . . . . . . . . . . . . . . . . . . . . . . . . . . 56

5.1.8 System Board . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

RX300 S3 Service Supplement 5

1 Introduction

The PRIMERGY RX300 S3 Server is an Intel-based server for medium-sized

networks and large companies. The server is suitable for use as a file server as

well as an application, information, or Internet server.

1.1 Overview of the documentation

Concept and target groups

This Service Supplement completes the information given in the Operating

Manual, the Options Guide and the Technical Manual of the system board.

The activities described in this manual may only be performed by service

personnel.

Service DVD PRIMERGY

Service partners of Fujitsu Siemens can order a Service DVD PRIMERGY. On

the DVD the following manuals are available in pdf format:

– The “Safety notes and other important information” manual

– The Operating Manual for PRIMERGY RX300 S3

– The Technical Manual for the system board D2119

– The Options Guide for PRIMERGY RX300 S3

– The Service Supplement PRIMERGY RX300 S3

– The “BIOS Setup” manual

6 Service Supplement RX300 S3

Overview of the documentation Introduction

Information/procedure Manual

Detailed safety notes Safety notes

Features and technical data of the server Operating Manual

Installation and operation, among other things:

– External ports

– Operation

– Configuration of the server

– Installation of the rack mounting kit

Troubleshooting

Installation/removal of all hot-plug components:

– hot-plug power supply units

– hot-plug hard disk drives

– hot-plug PCI boards

Information about the system board:

– Features of the system board

– Board layout

– Jumper settings

–LEDdisplays

– Replacing the battery

Technical Manual

Table 1: Overview of the documentation PRIMERGY RX300 S3

RX300 S3 Service Supplement 7

Introduction Overview of the documentation

IFor some components only the installation routine is described in the

Options Guide. Removing this components proceed in reverse order.

Extensions and upgrades

– Extending/replacing the main memory

– Installing a second processor / replacing the

processor / replacing the heat sink

– Installing the ROMB upgrade kit

– Installing accessible drives

– Installing a Local View module

– Installing a PCI controller in a low-profile slot

– Installing the PCI controller in the riser card

– Installing the external serial interface

– Installing the external parallel interface

– Converting from low-profile slots to standard

PCI slots

Options Guide

Cabling

Replacement routines:

– Replacing the operating panel

– Replacing the USB module

– Replacing the Power backplane

– Replacing the hot-plug PCI print

– Replacing the SAS backplane

– Replacing the fan box

– Replacing the IDTEMP Combo

– Replacing the system board

– Replacing the HDD card

Service Supplement

Settings and Board layouts

BIOS setup BIOS Setup

Information/procedure Manual

Table 1: Overview of the documentation PRIMERGY RX300 S3

8 Service Supplement RX300 S3

Notational conventions Introduction

1.2 Notational conventions

The following notational conventions are used in this manual:

Text in italics indicates commands, menu items or software programs.

„Quotation marks“ indicate names of chapters and terms that are being

emphasized.

Êdescribes activities that must be performed in the order

shown.

VCAUTION! pay particular attention to texts marked with this symbol.

Failure to observe this warning may endanger your life,

destroy the system or lead to the loss of data.

Iindicates additional information, notes and tips.

Table 2: Notational conventions

RX300 S3 Service Supplement 9

2Procedure

VCAUTION!

The actions described in these instructions should only be performed by

service personal.

ÊFirst of all please familiarize yourself with the safety instructions in the

chapter “Safety notes” on page 11.

ÊEnsure that all required manuals (see Service DVD) are available, printing

out the PDF files if necessary. You will definitely need the Operating Manual

for the server, the Options Guide for the server and the Technical Manual for

the system board.

ÊShut down the server correctly, switch it off, pull out the power plug, and

open the server as described in the section “Opening the server” on

page 17.

ÊReplace the faulty component as described in the relevant chapter.

ÊClose the server.1

ÊConnect the cables. 1

ÊConnect the server to the power outlet.1

ÊStart the operating system.1

ÊIf necessary, configure the server as required.1

1This procedures are described in the Operating Manual.

Andere Handbücher für Primergy RX300 S3

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY TX300 S7 Benutzerhandbuch

Fujitsu

Fujitsu PRIMERGY TX140 S1p Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX300 S8 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX600 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX330 S1 Betriebsanleitung

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Montageanleitung

Fujitsu

Fujitsu Primergy BX920 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Service-Handbuch

Fujitsu

Fujitsu PRIMERGY RX2540 M5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX920 S2 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 S3 Montageanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S8 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX25 0 M4 Series Montageanleitung

Fujitsu

Fujitsu SPARC Enterprise T5120 Technisches Handbuch

Fujitsu

Fujitsu PRIMEQUEST 580A Technisches Handbuch

Fujitsu

Fujitsu PRIMERGY BX900 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Bedienungs- und Wartungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Service-Handbuch

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Montageanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Kurzanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung