Fujitsu PRIMERGY SX650 Montageanleitung

PRIMERGY SX650 Storage Blade Hardware Guide

Areas Covered

Before Reading This Manual

This section explains the notes for your safety and conventions used in this manual. Make sure

to read before using this product.

Chapter 1 Names and Functions

This chapter explains the names and functions of the parts.

Chapter 2 Installation and Connection

This chapter explains how to install this product in the chassis, and how to connect it to the

Server Blade.

Chapter 3 Operation

This chapter explains operating this product.

Chapter 4 Operation and Maintenance

This chapter explains maintenance after starting to use the server.

Appendix

This chapter explains the specifications of this product.

Before Reading This Manual

For Your Safety

This manual contains important information, required to operate this product safely.

Thoroughly review the information in this manual before using this product. Especially note the points under "Safety" in this ma n u a l , a n d

only operate this product with a complete understanding of the material provided.

This manual should be kept in an easy-to-access location for quick reference when using this product.

Data Backup

To protect data stored in this product (including basic software (OS) and application software), perform backup and other necess a r y

operations. Note that data protection is not guaranteed when repairs are performed. It is the customer's responsibility to maintain backup

copies in advance.

In case of data loss, Fujitsu assumes no liability for data maintenance or restoration and damages that occur as a result of the d a t a l o s s f o r a n y

reason, except for items covered under warranty.

High Safety

This product is designed, developed and manufactured as contemplated for general use, including without limitation, general offi c e u s e ,

personal use, household use, and ordinary industrial use, but is not designed, developed and manufactured as contemplated for us e

accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, s e v e r e p h y s i c a l

damage, or other loss (hereinafter "High Safety Required Use"), including without limitation, nuclear reaction control in nuclear facility,

aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system. You

shall not use this Product without securing the sufficient safety required for the High Safety Required Use. If you wish to use this product for

High Safety Required Use, please consult with our sales representatives in charge before such use.

PRIMERGY SX650 Storage Blade Hardware Guide

Introduction

This manual explains the basic usage of the PRIMERGY SX650 Storage Blade (PG-B6ADC1) that will

be installed in the PRIMERGY BX600 S3 Blade Server System Unit, and connected to the PRIMERGY

BX620 S4 Server Blade. Before using this product, read this manual and related manuals to ensure

correct use of this product.

Remarks

■Warning descriptions

Various symbols are used throughout this manual. These are provided to emphasize important points for

your safety and that of others. The symbols and their meanings are as follows. Be sure to fully

understand these before reading this manual.

The following symbols are used to indicate the type of warning or cautions being described.

■Symbols

The following are symbols used throughout this manual.

■Screen shots and figures

Screen shots and figures are used as visual aids throughout this manual. Windows, screens, and file

names may vary depending on the OS, software, or configuration of the server used. Figures in this

manual may not show cables that are actually connected for convenience of explanation.

Failure to observe this warning may cause serious injury or death, and/or destroy the system.

Failure to observe this warning may lead to injury, destruction of the system, or loss of data.

A triangle mark emphasizes the urgency of the WARNING and CAUTION. Details are

described next to the triangle.

A barred circle ( ) warns against certain actions (Do Not). Details are described next to the

circle.

A black circle indicates actions that must be taken. Details are described next to the black circle.

Symbols Meaning

These sections explain prohibited actions and points to note when using this product. Make sure

to read these sections.

These sections explain information needed to operate the hardware and software properly.

Make sure to read these sections.

→This mark indicates reference pages or manuals.

■Abbreviations

The following expressions and abbreviations are used throughout this manual.

Product name Expressions and abbreviations

PRIMERGY SX650 Storage Blade Storage Blade or this product

PRIMERGY BX620 S4 Server Blade Server Blade

PRIMERGY BX600 S3 Blade Server System Unit Chassis

PRIMERGY BX600 Management Blade Management Blade

PRIMERGY SX650 Storage Blade Hardware Guide

Safety

For safe use of this product, it is vital that the following warnings are heeded.

■Product failure

■Handling this product

• In the event of heat, smoke, or a strange smell being emitted from this product, immediately turn the

Server Blade off and unplug the chassis power cable from the power source, and contact an office

listed in the "Contact Information" of the "Start Guide". Using this product without repairing it can

cause an electric shock or fire. Do not try to repair this product yourself.

• If a foreign object (water, pieces of metal, liquid etc.) falls into this product, immediately turn the

Server Blade off and unplug the chassis power cable from the power source, and contact an office

listed in the "Contact Information" of the "Start Guide".

Not doing so may cause an electric shock or fire. Extreme care should be taken in households with

young children.

• Do not rebuild this product yourself. Doing so may cause an electric shock or fire.

• Do not insert or drop anything, such as metals or flammable item, into any openings (air holes etc.)

on this product. Doing so may cause a product failure, fire, or electric shock.

• Do not place metal objects or containers containing water, such as vases, flowerpots, or drinking

glasses, on or near this product. Doing so may cause a product failure, fire, or electric shock.

• Avoid placing this product in locations subject to oil vapors, excessive humidity, direct sunlight, heat,

or dust, or having poor ventilation, or in areas where strong magnetic fields are generated. Storage or

use of this product in such areas may cause a product failure, fire, or electric shock.

• Do not pour water into this product. Doing so may cause a product failure, fire, or electric shock.

• Do not use this product in an area near water such as bath room or shower room. Doing so may

cause a product failure, fire, or electric shock.

• If electrical storms are occurring nearby, unplug the chassis power cable and other cables. Not doing

so can cause this product to be damaged by lightning and cause a fire.

• Do not cover the openings (air holes etc.) on this product. Doing so can cause overheating and fire.

• Do not place anything heavy on top of this product. Also, do not severely jar this product. Doing so

may cause this product to fall and result in injury.

• Do not place this product on a slanted or unstable surface or in areas subject to severe vibration.

Doing so may cause this product to fall and result in injury.

• Do not store this product without its original packaging.

Also, avoid storing this product in locations subject to excessive humidity, direct sunlight, or heat

(heating device, etc.).

• This product is easily affected by static electricity. Be careful to handle this product.

Touch a metal part of the chassis to discharge static electricity before using this product.

All product names used are trademarks or registered trademarks of their respective manufacturers.

All products are copyrights of their respective manufacturers.

PRIMERGY SX650 Storage Blade Hardware Guide

Contents

Chapter 1 Names and Functions

1.1 Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 2 Installation and Connection

2.1 Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.1.1 Installing in the chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.1.2 Connecting the SAS cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Chapter 3 Operation

3.1 Turning this product on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3.1.1 Turning on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3.1.2 Turning off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3.2 Installing the internal hard disk unit . . . . . . . . . . . . . . . . . . . . . . 19

3.2.1 Installation location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

3.2.2 Installable internal hard disk units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

3.2.3 Installation procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.2.4 Removal procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Chapter 4 Operation and Maintenance

4.1 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4.1.1 Points to be checked . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4.2 Maintenance service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

4.2.1 Contacting Maintenance Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Appendix

A Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Chapter 1

Names and Functions

This chapter explains the names and functions

of the parts.

1.1 Front

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 1 Names and Functions

1.1 Front

This section explains the names and functions of the parts.

aRelease latch

This latch is used when installing or removing this product.

bHard disk access LED

This LED lights up green when data is being written to or read from the internal hard disk unit.

cHard disk status LED

This LED lights up or blinks as follows depending on the internal hard disk unit status.

dDisk bay

Install internal hard disk units. Up to 5 units can be installed in this product.

LED status Description

Off Operating normally

Amber An error is detected in the internal hard disk unit

Blinking in amber Rebuilding or replacing a faulty hard disk

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY CX120 S1 Betriebsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2510 M2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY S60 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX330 S1 Bedienungsanleitung

Fujitsu

Fujitsu FUTRO A300 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5120 Technisches Handbuch

Fujitsu

Fujitsu Primergy BX2560 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX300 S8 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX200 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX900 S2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 Leitfaden

Fujitsu

Fujitsu PRIMERGY TX1320 M5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX400 S1 Bedienungsanleitung

Fujitsu

Fujitsu FW-S Series SERVIS Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX270 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S7 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX100 S3 Bedienungsanleitung

Fujitsu

Fujitsu M10 Series Service-Handbuch

Fujitsu

Fujitsu PRIMEQUEST 2800B3 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Installationsanleitung

Fujitsu

Fujitsu Primergy RX300 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY GX2570 M6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX300 S6 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung