Fujitsu PRIMERGY TX140 S1 Bedienungsanleitung

Upgrade and Maintenance Manual - English

PRIMERGY TX140 S1

Server

Upgrade and Maintenance Manual

Edition May 2012

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected]su.com.

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

TX140 S1 Upgrade and Maintenance Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured for general uses such as

general office use, personal use, domestic use and normal industrial use. It has

not been designed or manufactured for uses which demand an extremely high

level of safety and carry a direct and serious risk to life or body if such safety

cannot be ensured.

Upgrade and Maintenance Manual TX140 S1

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market: About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://jp.fujitsu.com/platform/server/primergy/harddisk/

TX140 S1 Upgrade and Maintenance Manual

Only for the Japanese market:

IAlthough described in this manual, some sections do not apply to the

Japanese market. These options and routines include:

– CSS (Customer Self Service)

– USB Flash Module (UFM)

Upgrade and Maintenance Manual TX140 S1

TX140 S1 Upgrade and Maintenance Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

1.1 Where to find which information? . . . . . . . . . . . . . . . 26

1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . 28

2 Before you start . . . . . . . . . . . . . . . . . . . . . . . . 29

2.1 Classification of procedures . . . . . . . . . . . . . . . . . 31

2.1.1 Customer Replaceable Units (CRU) . . . . . . . . . . . . . . . 31

2.1.2 Upgrade and Repair Units (URU) . . . . . . . . . . . . . . . . 32

2.1.3 Field Replaceable Units (FRU) . . . . . . . . . . . . . . . . . 33

2.2 Average task duration . . . . . . . . . . . . . . . . . . . . . 34

2.3 Tools you need at hand . . . . . . . . . . . . . . . . . . . . 35

2.4 Documents you need at hand . . . . . . . . . . . . . . . . . 37

3 Important information . . . . . . . . . . . . . . . . . . . . . 41

3.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 41

3.2 ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . 49

3.3 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 49

3.4 FCC Class A Compliance Statement . . . . . . . . . . . . . 50

3.5 Environmental protection . . . . . . . . . . . . . . . . . . . 51

4 Basic hardware procedures . . . . . . . . . . . . . . . . . . 53

4.1 Using diagnostics information . . . . . . . . . . . . . . . . 53

4.1.1 Locating the defective server . . . . . . . . . . . . . . . . . . 54

4.1.2 Determining the error class . . . . . . . . . . . . . . . . . . . 55

4.1.2.1 Global Error indicator . . . . . . . . . . . . . . . . . . . . 55

4.1.2.2 Customer Self Service (CSS) indicator . . . . . . . . . . . 56

4.1.3 Locating the defective component . . . . . . . . . . . . . . . . 57

4.1.3.1 Local diagnostic indicators on the front . . . . . . . . . . . 57

4.1.3.2 Local diagnostic indicators on the system board . . . . . . . 59

Upgrade and Maintenance Manual TX140 S1

Contents

4.2 Opening the rack door . . . . . . . . . . . . . . . . . . . . . 61

4.3 Shutting down the server . . . . . . . . . . . . . . . . . . . . 61

4.4 Extending / removing the server from the rack . . . . . . . . 64

4.4.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . . 64

4.4.2 Extending the server out of the rack . . . . . . . . . . . . . . . 65

4.4.3 Removing the server from the rack . . . . . . . . . . . . . . . . 66

4.5 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 67

4.5.1 Rack model . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

4.5.1.1 Removing the top cover . . . . . . . . . . . . . . . . . . . . 67

4.5.1.2 Removing the rack front cover . . . . . . . . . . . . . . . . 69

4.5.2 Tower model . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

4.5.2.1 Removing the side cover . . . . . . . . . . . . . . . . . . . 71

4.5.2.2 Removing the front cover . . . . . . . . . . . . . . . . . . . 74

4.5.2.3 Removing the HDD bay cover . . . . . . . . . . . . . . . . . 76

4.6 Closing the server . . . . . . . . . . . . . . . . . . . . . . . . 77

4.6.1 Rack model . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

4.6.1.1 Mounting the rack front cover . . . . . . . . . . . . . . . . . 77

4.6.1.2 Mounting the top cover . . . . . . . . . . . . . . . . . . . . 80

4.6.2 Tower model . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

4.6.2.1 Mounting the front cover . . . . . . . . . . . . . . . . . . . 82

4.6.2.2 Installing the HDD bay cover . . . . . . . . . . . . . . . . . 84

4.6.2.3 Mounting the side cover . . . . . . . . . . . . . . . . . . . . 85

4.7 Mounting the server in the rack . . . . . . . . . . . . . . . . 87

4.7.1 Seating the server on the rack rails . . . . . . . . . . . . . . . . 87

4.7.2 Sliding the server into the rack . . . . . . . . . . . . . . . . . . 89

4.8 Connecting the server to the mains . . . . . . . . . . . . . . 90

4.9 Switching on the server . . . . . . . . . . . . . . . . . . . . . 91

4.10 Concluding software tasks . . . . . . . . . . . . . . . . . . . 92

4.11 Closing the rack door . . . . . . . . . . . . . . . . . . . . . . 92

5 Basic software procedures . . . . . . . . . . . . . . . . . . . 93

5.1 Starting the maintenance task . . . . . . . . . . . . . . . . . 93

5.1.1 Disabling BitLocker functionality . . . . . . . . . . . . . . . . . 93

5.1.2 Disabling SVOM boot watchdog functionality . . . . . . . . . . . 94

5.1.2.1 Viewing boot watchdog settings . . . . . . . . . . . . . . . . 94

5.1.2.2 Configuring boot watchdog settings . . . . . . . . . . . . . . 95

TX140 S1 Upgrade and Maintenance Manual

Contents

5.1.3 Removing backup and optical disk media . . . . . . . . . . . . 96

5.1.4 Verifying and configuring the backup software solution . . . . . 96

5.1.5 Note on server maintenance in a Multipath I/O environment . . 97

5.1.6 Switching on the ID indicator . . . . . . . . . . . . . . . . . . 99

5.2 Completing the maintenance task . . . . . . . . . . . . . . . 100

5.2.1 Updating or recovering the system board BIOS and iRMC . . . 100

5.2.1.1 Updating or recovering the system board BIOS . . . . . . . 100

5.2.1.2 Updating or recovering the iRMC . . . . . . . . . . . . . . 102

5.2.2 Verifying system information backup / restore . . . . . . . . . . 104

5.2.3 Updating RAID controller firmware . . . . . . . . . . . . . . . 105

5.2.4 Enabling Option ROM scan . . . . . . . . . . . . . . . . . . . 106

5.2.5 Verifying and configuring the backup software solution . . . . . 107

5.2.6 Resetting the boot retry counter . . . . . . . . . . . . . . . . . 108

5.2.6.1 Viewing the boot retry counter . . . . . . . . . . . . . . . . 108

5.2.6.2 Resetting the boot retry counter . . . . . . . . . . . . . . . 108

5.2.7 Enabling SVOM boot watchdog functionality . . . . . . . . . . 110

5.2.8 Enabling replaced components in the system BIOS . . . . . . . 111

5.2.9 Verifying the memory mode . . . . . . . . . . . . . . . . . . . 111

5.2.10 Verifying the system time settings . . . . . . . . . . . . . . . . 112

5.2.11 Viewing and clearing the System Event Log (SEL) . . . . . . . 113

5.2.11.1 Viewing the SEL . . . . . . . . . . . . . . . . . . . . . . . 113

5.2.11.2 Clearing the SEL . . . . . . . . . . . . . . . . . . . . . . . 114

5.2.12 Updating the NIC configuration file in a Linux environment . . . 114

5.2.13 Enabling BitLocker functionality . . . . . . . . . . . . . . . . . 116

5.2.14 Performing a RAID array rebuild . . . . . . . . . . . . . . . . . 117

5.2.15 Looking up changed MAC / WWN addresses . . . . . . . . . . 117

5.2.15.1 Looking up MAC addresses . . . . . . . . . . . . . . . . . 117

5.2.15.2 Looking up WWN addresses . . . . . . . . . . . . . . . . . 118

5.2.16 Using the Chassis ID Prom Tool . . . . . . . . . . . . . . . . . 119

5.2.17 Configuring LAN teaming . . . . . . . . . . . . . . . . . . . . 119

5.2.17.1 After replacing / upgrading LAN controllers . . . . . . . . . 120

5.2.17.2 After replacing the system board . . . . . . . . . . . . . . . 120

5.2.18 Switching off the ID indicator . . . . . . . . . . . . . . . . . . 120

5.2.19 Specifying the chassis model . . . . . . . . . . . . . . . . . . 121

6 Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . 123

6.1 Standard power supply . . . . . . . . . . . . . . . . . . . . 124

6.1.1 Replacing the standard power supply unit . . . . . . . . . . . . 124

6.1.1.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . 124

6.1.1.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . 124

Upgrade and Maintenance Manual TX140 S1

Contents

6.1.1.3 Disconnecting power cables . . . . . . . . . . . . . . . . 126

6.1.1.4 Removing the standard power supply unit . . . . . . . . . 128

6.1.1.5 Installing the standard power supply unit . . . . . . . . . . 130

6.1.1.6 Reconnecting power cables . . . . . . . . . . . . . . . . . 132

6.1.1.7 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 134

6.2 Converting a standard power supply to a redundant power

supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

6.2.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 135

6.2.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 136

6.2.3 Disconnecting power cables . . . . . . . . . . . . . . . . . . 136

6.2.4 Removing the standard power supply unit . . . . . . . . . . . 137

6.2.5 Installing the PSU cage . . . . . . . . . . . . . . . . . . . . . 137

6.2.6 Connecting power cables . . . . . . . . . . . . . . . . . . . . 140

6.2.7 Installing the power supply module . . . . . . . . . . . . . . . 142

6.2.8 Installing the PSU dummy cover . . . . . . . . . . . . . . . . 143

6.2.9 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 144

6.3 Redundant power supply . . . . . . . . . . . . . . . . . . . 145

6.3.1 Installing the second power supply module . . . . . . . . . . . 145

6.3.1.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . 145

6.3.1.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 145

6.3.1.3 Removing the dummy cover . . . . . . . . . . . . . . . . 146

6.3.1.4 Installing the power supply module . . . . . . . . . . . . . 147

6.3.1.5 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 148

6.3.2 Replacing a power supply module . . . . . . . . . . . . . . . 149

6.3.2.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . 149

6.3.2.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 150

6.3.2.3 Removing the power supply module . . . . . . . . . . . . 150

6.3.2.4 Installing the new power supply module . . . . . . . . . . 151

6.3.2.5 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 151

6.3.3 Replacing the power distribution board . . . . . . . . . . . . . 152

6.3.3.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . 152

6.3.3.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 152

6.3.3.3 Removing the PSU modules . . . . . . . . . . . . . . . . 154

6.3.3.4 Disconnecting the power cables . . . . . . . . . . . . . . 155

6.3.3.5 Replacing the defective power distribution board . . . . . . 156

6.3.3.6 Connecting the power cables . . . . . . . . . . . . . . . . 157

6.3.3.7 Installing the PSU module / dummy cover . . . . . . . . . 157

6.3.3.8 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 158

7 Hard disk drives / solid state drives . . . . . . . . . . . . . 159

Andere Handbücher für PRIMERGY TX140 S1

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY RX300 S6 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Installationsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Bedienungsanleitung

Fujitsu

Fujitsu SPARC EnterpriseM3000 Bedienungsanleitung

Fujitsu

Fujitsu teamserver M851i Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S6 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY TX2550 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY SX940 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M5000 Installationsanleitung

Fujitsu

Fujitsu Primergy RX4770 M1 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M4000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX1310 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX922 S2 Bedienungsanleitung

Fujitsu

Fujitsu SE700 Bedienungsanleitung

Fujitsu

Fujitsu FUTRO S450 Bedienungsanleitung

Fujitsu

Fujitsu Primergy BX620 S2 Kurzanleitung

Fujitsu

Fujitsu Primergy RX100 S5 Leitfaden

Fujitsu

Fujitsu SPARC Enterprise M3000 Service-Handbuch

Fujitsu

Fujitsu PRIMERGY Econel 200 S2 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY GX2570 M6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2540 M1 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung