Fujitsu PRIMERGY TX1310 M3 Bedienungsanleitung

Upgrade and Maintenance Manual - English

FUJITSU Server PRIMERGY TX1310 M3

Upgrade and Maintenance Manual

January 2018

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

TX1310 M3 Upgrade and Maintenance Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

Upgrade and Maintenance Manual TX1310 M3

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for Japan: About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of HDD:

http://jp.fujitsu.com/platform/server/primergy/harddisk/

Only for Japan:

Shielded LAN cables should be used in this product.

TX1310 M3 Upgrade and Maintenance Manual

Version history

Issue number Reason for update

1.0 / June 2017 Initial release

2.0 / June 2017 Gaskets for RDX drive added

3.0 / January 2018 Regular update

Upgrade and Maintenance Manual TX1310 M3

Version history

TX1310 M3 Upgrade and Maintenance Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

1.1 Notational conventions . . . . . . . . . . . . . . . . . . . . 16

2 Before you start . . . . . . . . . . . . . . . . . . . . . . . . 17

2.1 Classification of procedures . . . . . . . . . . . . . . . . . 19

2.1.1 Customer Replaceable Units (CRU) . . . . . . . . . . . . . . . 19

2.1.2 Upgrade and Repair Units (URU) . . . . . . . . . . . . . . . . 20

2.1.3 Field Replaceable Units (FRU) . . . . . . . . . . . . . . . . . 21

2.2 Average task duration . . . . . . . . . . . . . . . . . . . . . 22

2.3 Tools you need at hand . . . . . . . . . . . . . . . . . . . . 23

2.4 Documents you need at hand . . . . . . . . . . . . . . . . . 26

3 Important information . . . . . . . . . . . . . . . . . . . . . 29

3.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 29

3.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 38

3.3 FCC Class A Compliance Statement . . . . . . . . . . . . . 39

3.4 Environmental protection . . . . . . . . . . . . . . . . . . . 40

4 Basic hardware procedures . . . . . . . . . . . . . . . . . . 43

4.1 Using diagnostics information . . . . . . . . . . . . . . . . 43

4.2 Shutting down the server . . . . . . . . . . . . . . . . . . . 44

4.3 Disconnecting the power cord . . . . . . . . . . . . . . . . 45

4.4 Getting access to the component . . . . . . . . . . . . . . . 46

4.4.1 Removing the side cover . . . . . . . . . . . . . . . . . . . . 46

4.4.2 Extending the HDD cage out of the chassis . . . . . . . . . . . 47

4.4.3 Removing the front cover . . . . . . . . . . . . . . . . . . . . 50

4.5 Reassembling . . . . . . . . . . . . . . . . . . . . . . . . . 51

4.5.1 Installing the front cover . . . . . . . . . . . . . . . . . . . . . 51

Upgrade and Maintenance Manual TX1310 M3

Contents

4.5.2 Sliding the HDD cage into the chassis . . . . . . . . . . . . . . 52

4.5.3 Installing the side cover . . . . . . . . . . . . . . . . . . . . . . 55

4.6 Connecting the power cord . . . . . . . . . . . . . . . . . . . 56

4.7 Switching on the server . . . . . . . . . . . . . . . . . . . . . 57

4.8 Handling air deflector . . . . . . . . . . . . . . . . . . . . . . 58

4.8.1 Removing the air deflector . . . . . . . . . . . . . . . . . . . . 58

4.8.2 Installing the air deflector . . . . . . . . . . . . . . . . . . . . . 59

5 Basic software procedures . . . . . . . . . . . . . . . . . . . 61

5.1 Starting the maintenance task . . . . . . . . . . . . . . . . . 61

5.1.1 Suspending BitLocker functionality . . . . . . . . . . . . . . . . 61

5.1.2 Removing backup and optical disk media . . . . . . . . . . . . 63

5.1.3 Verifying and configuring the backup software solution . . . . . . 63

5.2 Completing the maintenance task . . . . . . . . . . . . . . . 64

5.2.1 Updating or recovering the system board BIOS . . . . . . . . . 64

5.2.1.1 Updating or recovering the system board BIOS . . . . . . . . 64

5.2.2 Enabling Option ROM scan . . . . . . . . . . . . . . . . . . . . 65

5.2.3 Reconfiguring the backup software solution . . . . . . . . . . . 66

5.2.4 Enabling replaced components in the BIOS . . . . . . . . . . . 66

5.2.5 Verifying the system time settings . . . . . . . . . . . . . . . . 67

5.2.6 Viewing the System Event Log (SEL) . . . . . . . . . . . . . . . 68

5.2.6.1 Viewing the SEL . . . . . . . . . . . . . . . . . . . . . . . . 68

5.2.7 Updating the NIC configuration file in a Linux and VMware

environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

5.2.8 Resuming BitLocker functionality . . . . . . . . . . . . . . . . . 70

5.2.9 Performing a RAID array rebuild . . . . . . . . . . . . . . . . . 71

5.2.10 Looking up changed MAC / WWN addresses . . . . . . . . . . 72

5.2.10.1 Looking up MAC addresses . . . . . . . . . . . . . . . . . . 72

5.2.11 Using the Chassis ID Prom Tool . . . . . . . . . . . . . . . . . 72

5.2.12 Configuring LAN teaming . . . . . . . . . . . . . . . . . . . . . 73

5.2.12.1 After replacing/upgrading LAN controllers . . . . . . . . . . 73

5.2.12.2 After replacing a system board . . . . . . . . . . . . . . . . 73

6 Power supply unit (PSU) . . . . . . . . . . . . . . . . . . . . 75

6.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . . 75

6.2 Replacing the PSU . . . . . . . . . . . . . . . . . . . . . . . . 76

TX1310 M3 Upgrade and Maintenance Manual

Contents

6.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 76

6.2.2 Removing the PSU . . . . . . . . . . . . . . . . . . . . . . . 76

6.2.3 Installing the PSU . . . . . . . . . . . . . . . . . . . . . . . . 79

6.2.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 82

7 Hard disk drives (HDDs) . . . . . . . . . . . . . . . . . . . . 83

7.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . 84

7.1.1 General equipping rules . . . . . . . . . . . . . . . . . . . . . 84

7.1.2 Mounting order . . . . . . . . . . . . . . . . . . . . . . . . . . 84

7.2 Installing 3.5-inch HDDs . . . . . . . . . . . . . . . . . . . . 85

7.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 85

7.2.2 Removing Easyrail out of the upper HDD bay . . . . . . . . . . 85

7.2.3 Installing a 3.5-inch HDD . . . . . . . . . . . . . . . . . . . . 86

7.2.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 87

7.3 Removing 3.5-inch HDDs . . . . . . . . . . . . . . . . . . . 88

7.3.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 88

7.3.2 Removing a 3.5-inch HDD . . . . . . . . . . . . . . . . . . . . 90

7.3.3 Inserting Easyrails in the upper HDD bay . . . . . . . . . . . . 91

7.3.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 91

7.4 Replacing a 3.5-inch HDD . . . . . . . . . . . . . . . . . . . 92

7.4.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 92

7.4.2 Removing the defective 3.5-inch HDD . . . . . . . . . . . . . . 92

7.4.3 Installing the new 3.5-inch HDD . . . . . . . . . . . . . . . . . 92

7.4.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 93

8 System fans . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

8.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . 96

8.2 Replacing the rear fan . . . . . . . . . . . . . . . . . . . . . 97

8.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 97

8.2.2 Removing the defective rear fan . . . . . . . . . . . . . . . . . 97

8.2.3 Installing the new rear fan . . . . . . . . . . . . . . . . . . . . 99

8.2.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 102

8.3 Replacing the front fan . . . . . . . . . . . . . . . . . . . . . 103

8.3.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 103

8.3.2 Removing the defective front fan . . . . . . . . . . . . . . . . 103

8.3.3 Installing the new front fan . . . . . . . . . . . . . . . . . . . . 105

Upgrade and Maintenance Manual TX1310 M3

Contents

8.3.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 106

9 Expansion cards and backup units . . . . . . . . . . . . . 107

9.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . 108

9.2 Handling slot brackets . . . . . . . . . . . . . . . . . . . . 110

9.2.1 Installing a slot bracket . . . . . . . . . . . . . . . . . . . . . 110

9.2.2 Removing a slot bracket . . . . . . . . . . . . . . . . . . . . 112

9.3 Expansion cards . . . . . . . . . . . . . . . . . . . . . . . . 113

9.3.1 Installing expansion cards . . . . . . . . . . . . . . . . . . . 113

9.3.1.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 113

9.3.1.2 Removing the PCI slot bracket . . . . . . . . . . . . . . . 114

9.3.1.3 Installing an expansion card . . . . . . . . . . . . . . . . . 115

9.3.1.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 116

9.3.2 Removing expansion cards . . . . . . . . . . . . . . . . . . . 116

9.3.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 116

9.3.2.2 Removing an expansion card . . . . . . . . . . . . . . . . 117

9.3.2.3 Installing a PCI slot bracket . . . . . . . . . . . . . . . . . 118

9.3.2.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 118

9.3.3 Replacing expansion cards . . . . . . . . . . . . . . . . . . . 119

9.3.3.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . 119

9.3.3.2 Removing an expansion card . . . . . . . . . . . . . . . . 119

9.3.3.3 Installing an expansion card . . . . . . . . . . . . . . . . . 120

9.3.3.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . 120

10 Main memory . . . . . . . . . . . . . . . . . . . . . . . . . 121

10.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . 122

10.1.1 Memory sequence . . . . . . . . . . . . . . . . . . . . . . . 123

10.1.2 Modes of operation . . . . . . . . . . . . . . . . . . . . . . . 123

10.2 Installing memory modules . . . . . . . . . . . . . . . . . . 124

10.2.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 124

10.2.2 Installing a memory module . . . . . . . . . . . . . . . . . . . 124

10.2.3 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 125

10.3 Removing memory modules . . . . . . . . . . . . . . . . . 126

10.3.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 126

10.3.2 Removing a memory module . . . . . . . . . . . . . . . . . . 126

10.3.3 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 127

Andere Handbücher für PRIMERGY TX1310 M3

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY BX600 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX2550 M2 Bedienungsanleitung

Fujitsu

Fujitsu BX630 - PRIMERGY - S2 Dual Bedienungsanleitung

Fujitsu

Fujitsu Primergy BX2560 M1 Bedienungsanleitung

Fujitsu

Fujitsu BS2000/OSD Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S3 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S3 Leitfaden

Fujitsu

Fujitsu PRIMERGY TX1320 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Bedienungsanleitung

Fujitsu

Fujitsu FD-1000ST Bedienungsanleitung

Fujitsu

Fujitsu primergy h250 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX100 S3 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M5000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX2550 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY Econel 200 S2 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY CX2550 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX2550 M5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX2560 M2 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S3 Betriebsanleitung

Fujitsu

Fujitsu FUTRO S900 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S4 Leitfaden

Fujitsu

Fujitsu PRIMERGY TX200 S7 Benutzerhandbuch

Fujitsu

Fujitsu l ETERNUS AF Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung