G3 CABRIO 30 AR Bedienungsanleitung

CABRIO PACKS

WITH ALPRIDE 2.0 AIRBAG SYSTEM

USER MANUAL

CONTENTS

ENGLISH 4

FRANÇAIS 12

CONTENTS

1. INTRODUCTION 4

2. WARNING & APPROPRIATE USE 4

3. DELIVERY 4

4. CARTRIDGES 5

4.1. INSTRUCTIONS 5

4.2. TYPE & INSPECTION 5

5. OPERATION/GETTING READY 5

5.1. INITIAL OPERATION 5

5.2. CORRECT ATTACHMENT & SETTING 6

6. INSTRUCTIONS 6

6.1. REGULAR CHECKS 6

6.2. DEPLOYING THE ALPRIDE AIRBAG SYSTEM 7

6.3. HANDLING DURING AVALANCHE INCIDENT 7

6.4. DEFLATING AND REFOLDING THE AIRBAG 7

7. MAINTENANCE 8

7.1. POST-AVALANCHE CHECK 8

7.2. HOW TO REMOVE THE DETACHABLE AIRBAG SYSTEM 9

7.3 HOW TO INSTALL THE DETACHABLE AIRBAG SYSTEM 9

7.4. STORAGE, CLEANING & SERVICE LIFE 9

7.5. TRANSPORT & TRAVEL 9

8. ADDITIONAL INFORMATION 10

8.1. TROUBLE SHOOTING 10

8.2. TECHNICAL DATA 10

8.3. PRODUCT DESCRIPTION 11

8.4. SERVICE CENTER 11

9. SALES & HOMOLOGATION 11

ENGLISH -4

1. INTRODUCTION

Congratulations on your purchase of the ALPRIDE AIRBAG SYSTEM.

This manual provides you with information about the function and use of the ALPRIDE AIRBAG SYSTEM. It applies to every out of bounds

snow sport enthusiast.

Please read this manual carefully before you use the device. Pay special attention to the warning notices and strictly adhere to the informa-

tion within the user manual. In order to be able to easily consult this user manual we suggest that you keep it in a convenient location.

The ALPRIDE AIRBAG SYSTEM is an emergency equipment, which under certain conditions can prevent a total burial if activated. It can-

not prevent the release of an avalanche. An element of deadly risk remains even if the user doesn’t get buried. Every avalanche is absolute-

ly life threatening regardless of any equipment. Therefore the ALPRIDE AIRBAG SYSTEM should not encourage you to take greater risks.

The ALPRIDE AIRBAG SYSTEM is certified by TÜV Süd (Daimlerstr. 11, 85748 Garching bei München, Germany.) to meet the require-

ments of the EU regulation (EU2016/425).

2. WARNING & APPROPRIATE USE

1- The ALPRIDE AIRBAG SYSTEM cannot prevent avalanches from occurring.

2- The intended and reasonably foreseeable use of this backpack is only: skiing, snowboarding, snowshoeing. IT CANNOT BE USED IN

WATER.

3- Avalanches are life-threatening, no matter what equipment is deployed.

4- Users must not take more risks simply because they are wearing a ALPRIDE AIRBAG SYSTEM.

5- Use of an avalanche backpack is no guarantee that total burial in snow will not occur.

6- The ALPRIDE AIRBAG SYSTEM requires careful handling and proper inspection before each use.

7- When packing the airbags make sure that nothing can tear or damage the airbag, inflator system and its fabric cover. Also make sure

that the airbag can open up freely.

8- Fold the airbag according to the instructions. Improper folding inhibits the opening of the airbag, can lead to malfunctioning and can

damage the backpack.

9- G3 cannot be held responsible for injuries caused by an avalanche involving its ALPRIDE AIRBAG SYSTEM.

10- Hazard is best avoided by avoiding hazardous situations.

11- Only use original ALPRIDE cartridges.

12- Do not throw or stress the cartridges. Risk of explosion! Max. temperature range is -30 to +50 ºC.

13- Keep children away from the ALPRIDE AIRBAG SYSTEM.

14- Be careful not to endanger other people when practicing the activation of the air-bag.

15- In order to avoid an unwanted or inadvertent activation where other people could be harmed by such an accidental activation, it is rec-

ommended that you stow the trigger handle in the shoulder strap sleeve with the covered zipper, especially on chairlifts, in gondolas,

in or around a helicopter, the bus, train, automobile, etc.

16- The ALPRIDE AIRBAG SYSTEM does not replace conventional avalanche rescue equipment: transceivers, shovels and probes should

always be taken on off-piste tours.

17- The ALPRIDE AIRBAG SYSTEM has to stay clean all time. In case of a spoiled inflator system, the function of the airbag system is not

granted.

18- Do not use the ALPRIDE AIRBAG SYSTEM with unauthorized carrying systems (backpack, vest, etc.).

3. DELIVERY

ALPRIDE AIRBAG SYSTEM 2.0

^^^^^^^^

1. ALPRIDE

AIRBAG SYSTEM

(backpack with attached

airbag, inflator device &

trigger handle)

2. ALPRIDE CARTRIDGES

IN BLISTER PACK

1 ALPRIDE Argon Cartridge

(26g)

1 ALPRIDE CO

Cartridge

(60g)

3. SCREW TOOL

(The screw tool is

attached at the inflator cover

by a short leash.)

4. USER MANUAL

CABRIO PACKS

WITH ALPRIDE 2.0 AIRBAG SYSTEM

USER MANUAL

5- ENGLISH

4. CARTRIDGES

4.1. INSTRUCTIONS

The ALPRIDE cartridges have the lifejacket’s standard. No maintenance is required and they are certified without leaks and used for almost

50 years in the US navy.

Once the airbag has been inflated, the gas cartridges have to be exchanged with a new set of a full one. The ALPRIDE cartridges are

disposable; no refill is possible. Inappropriate handling can lead to system failure.

The ALPRIDE cartridges are the same for all the brands using the ALPRIDE AIRBAG SYSTEM. Flying with this type of cartridges is ap-

proved by IATA (The International Air Transport Association is the trade association for the world’s airlines).

The ALPRIDE cartridges must be kept safe from harm. Damaged cartridges must be replaced.

The ALPRIDE cartridges must be kept away from sources of heat (direct sunlight, hobs, stoves, etc.).

4.2. TYPE & INSPECTION

1- The working pressure of this cartridge is 17.5 mpa.

2- The cartridges are designed for a temperature range of -30 to +50ºC.

3- Use of the cartridge must be limited to this ambient temperature range.

4- One cartridge contains compressed argon and the other one liquefied CO2 gas.

5- This gas cartridge must only be used with Alpride device. Do not refill disposable cartridges. Content is under pressure of 17.5 mpa. If

the weight of this gas cartridge is less than the minimum weight marked on the gas cartridge (min. gross weight) it should be rejected.

5. OPERATION/GETTING READY

In the event of an avalanche, the user must tug on the trigger handle in order to release the compressed gas of the two ALPRIDE car-

tridges: this inflates the 150 litres avalanche airbag within 3 seconds.

The ALPRIDE AIRBAG SYSTEM concept is based on the physical principle of inverse segregation. This is a phenomenon whereby, given

a uniformly moving mass of particles, the smaller particles sink downwards and the larger ones float to the surface. The inflated airbag

increases the victim’s volume and greatly amplifies this inverse segregation effect. The avalanche backpack helps prevent total burial in

the snow. The airbag’s shape protects the back and the head of the user. Moreover, the rounded shape gives optimal float efficiency on

the avalanche and the bright airbag color helps rapid localization.

5.1. INITIAL OPERATION

The uncompromising functioning and the personal handling by the user of the ALPRIDE AIRBAG SYSTEM are critical. The handling is

straightforward but must be done with care and according to the steps outlined below:

FULL?

STEP 1

Open the packaging box and take

out the cartridges.

STEP 2

Turn the screw to load the inflator

system and unscrew to remove tool.

STEP 3

The system is ready to use when

the red pin is no longer visible.

STEP 4

Screw in the cartridge in a

clockwise direction. Make

sure you only ever screw in a

full cartridge!

^^^^^^^^

ENGLISH -6

5.5

5.6

5.8

^^^^^^^^

5.7

STEP 5

Close the inflator cover

with the zipper.

STEP 6

Pack your backpack for

your ride.

STEP 7

Put the backpack on and

adjust shoulder straps,

chest belt and leg loop to

fit your body.

STEP 8

Open the zipper sleeve on

the shoulder strap and take

out the trigger handle when

you are on the slope.

STEP 9

Before your go on your ride

test the specific hand move-

ment to reach the trigger

handle without deploying!

5.2. CORRECT ATTACHMENT & SETTING

Put the backpack on and adjust shoulder straps to fit your body. Always fasten hipbelt, chest and leg loop and fit them according to your

body. The ALPRIDE AIRBAG SYSTEM will only be of use to you if the backpack stays on your body during an emergency! Most of the

weight of the pack should be resting on your hips rather than being carried by your shoulders.

5.9

5.8

^^^^^^^^

1 CHESTBELT BUCKLE

STEP 1

STEP 2

STEP 3

2 HIPBELT BUCKLE

STEP 1

STEP 2

STEP 3

G3 shall not be liable for any damages and losses due to incorrect set up, incorrect fitting or incorrect adjustments.

6. INSTRUCTIONS

6.1. REGULAR CHECKS

Your ALPRIDE avalanche backpack requires no maintenance but the following points have to be observed:

1- Deploy the airbag before the new season starts or at least once a year or after the backpack has been exposed to moisture/wet

weather. Check its condition, allow it to dry and fold it back together again.

2- Pack the airbag away only when it is completely dry.

3- Prior to every tour, check all the points described in this user manual and inspect the condition of the system’s safety straps and fasten-

ings.

4- Make sure that the cartridges are not pierced (empty) and that the red dot on the inflator systems is not visible on the inflator cover

window.

CHESTBELT BUCKLE

HIPBELT BUCKLE

7- ENGLISH

STEP 1

Open the backpack

STEP 2

Open the cartridges compartment

zipper

STEP 3

Use the screw tool to push the valve

to deflate the airbag.

STEP 4

Fully open the airbag

compartment zipper

STEP 5

Turn the backpack around and draw

the airbag zipper to the other side.

STEP 6

Reattach the zipper (like on a jacket)

and close it approx. 5cm.

STEP 7

Turn the rucksack back round and

fold in the right side of the airbag, as

shown above.

STEP 8

Push the airbag towards the

left and push the upper part

towards the right. Left has to

overlay the right part

STEP 9

Close the first part of the airbag

compartment.

STEP 10

Push the top on the left side

STEP 11

Push the top on the left and push

the upper part towards the right side

of the backpack

STEP 12

Push the top part of the airbag

into the compartment and

close the zipper further.

6.15

6.16

STEP 13

Push the last part of the airbag into

the compartment and close the

zipper completely.

STEP 14

Unscrew the cartridges. STEP 15

Take the cartridges off STEP 16

Put the handle on the upper

position

Practice deploying the airbag so you have a feel for the amount of force you need to apply. In the event of a real avalanche, you will then

be able to deploy it correctly and intuitively. Before practising, remove the cartridges from the inflator system. Now tug on the handle. You

should hear a “clack” sound that tells you the deployment was successful.

6.2. DEPLOYING THE ALPRIDE AIRBAG SYSTEM

In the event of an avalanche, immediately deploy the airbag. It is better to pull once (too) hard on the handle than too gently: give the trigger

handle a good, hard, fast tug (approx. 8–12 kg). The airbag will inflate on its own within 3 seconds. It makes a loud filling sound as it does

so. The airbag is self-inflating, independent of whether you are skiing, are falling, are lying on top of the airbag or are already captured by the

moving snow. The inflated airbags will not compromise your possible escape or avoidance of rocks etc., which you should always try to do.

6.3. HANDLING DURING AVALANCHE INCIDENT

In the event of an avalanche, always try to reach a place of safety or escape from the path of the snowslip. If on them, try also to remove

your skis or snowboard, as these have an anchoring effect in an avalanche. Once the avalanche appears to be losing momentum, close

your mouth and hold your arms in front of your face to create a life-saving air pocket. Once the avalanche has stopped moving and you

can extract yourself, do not remove the airbag and help others. Only remove when you are confident there is no more risk of a second

avalanche.

6.4. DEFLATING AND RE-FOLDING THE AIRBAG

On the following illustrations it’s explained how to reload the ALPRIDE AIRBAG SYSTEM correctly:

ENGLISH -8

6.17

6.18

6.19

FULL?

6.20

STEP 17

Load the device by screwing the

tool clockwise to the very end.

STEP 18

Unscrew the tool. System is

ready to use if the red pin has

disappeared

STEP 19

Screw the new cartridges STEP 20

Close the cartridges compartment

IMPORTANT NOTES

DO NOT TWIST THE AIRBAG

DO NOT CROSS THE HOOKS

DO NOT FOLD THE AIRBAG

DO NOT ROLL THE AIRBAG

DO NOT BLOCK THE AIRBAG TO DEFLATE THE AIRBAG, USE THE SCREW

ONLY (NOT A SCREW DRIVER OR A PEN).

MAKE SURE THE STRAP IS ALWAYS

WELL TIGHTENED.

G3 shall not be liable for any damages and losses due to incorrect reloading.

HOW TO ADJUST THE TRIGGER HANDLE

STEP 1

Adjust the height of the trigger handle on the shoulder strap. There are three

different settings (S/M/L).

The trigger handle should ideally be at chest height.

STEP 2

Turn up the trigger handle to

change the height position.

STEP 3

Then slide the trigger handle out

of the webbing loop according

and slide it back in the correct

height.

7. MAINTENANCE

7.1. POST-AVALANCHE CHECK

Every use of the ALPRIDE AIRBAG SYSTEM can negatively affect the material. Often the damage is not visible with the naked eye. After

a use in an avalanche, contact the authorized Dealer where you have bought your ALPRIDE AIRBAG SYSTEM for further inspection.

If you are unable to send the ALPRIDE AIRBAG SYSTEM, then following points are recommended to check:

1- Check the airbags visually for punctures

2- Check the airbag fastening straps for tears

3- Check the shoulder, waist and chest straps as well as the seams for tears

4- Check all buckles (adjustment buckles at the shoulder straps, waist and chest strap)

5- Check buckles as well as leg straps for tears and deformation

9- ENGLISH

7.2. HOW TO REMOVE THE DETACHABLE AIRBAG SYSTEM

STEP 1

Take the cartridges off. STEP 2

Open the air bag zipper and detach

the hooks.

STEP 3

Open the shoulder strap pocket

and detach the trigger handle. Push

handle and the cable through the

hole.

STEP 4

Pull the airbag out.

7.3. HOW TO INSTALL THE DETACHABLE AIRBAG SYSTEM

STEP 1

Open the air bag compartment

zipper. Pass the airbag through

the hole.

STEP 2

Put the trigger handle through the

hole to pass it into the shoulder

strap.

STEP 3

Attach the hooks and fold the air bag. STEP 4

Make sure the strap is always well

tightened.

7.4. STORAGE, CLEANING & SERVICE LIFE

STORAGE

Store your ALPRIDE AIRBAG SYSTEM in a cool, dry environment. The cartridges can be left attached to the system, though we recom-

mend detaching them and pulling the trigger handle to release the spring if storing the backpack for a longtime. For safety reasons, keep

the backpack and cartridge out of the reach of children.

G3 shall not be liable for any damages and losses due to improper storage.

CLEANING

Use only water (no cleaning products!) to clean the backpack. Ensure that the entire product is dry before using it again to avoid the risk of

icing. In case of a dirty inflator, the inflator system must be cleaned properly with a damp soft microfiber towel.

G3 shall not be liable for any damages and losses due to improper cleaning.

DISPOSAL

Dispose of the product in domestic waste. Do not mechanically disrupt or incinerate the product. This may lead to potential hazards.

SERVICE LIFE

The product has a limited life time and should be replaced in case of signs of mechanical wear. It is recommended to regularly control

your gear and to replace it at least every five years after first use. The functioning could be reduced due to mechanical wear or improper

use. Dispose of the product if you notice any damage. The ALPRIDE AIRBAG SYSTEM is designed to withstand 20 inflations and 40

practice/test triggers not involving inflation. The cartridges are designed to have a service life of 10 years as of fabrication date/first use.

7.5. TRANSPORT & TRAVEL

Generally you are allowed to take your airbag on the airplane. The guidelines are outlined in the IATA (International Air Transport Associa-

tion) reference guide under dangerous goods table 2.3A. (see www.iata.org).

The IATA guidelines are only a recommendation for airlines. That is why we advise you to inform your airline that you are transporting an

avalanche airbag before starting your trip.

ENGLISH -10

Permitted in or as

carry-on baggage

Permitted in

or as checked

baggage

Permitted on

one’s person

The approval of

the operator(s) is

required

The pilot-in-

command must

be informed of

the location

YES YES NO YES NO

Avalanche rescue backpack, one (1) per person, containing a cartridge of

compressed gas in Div. 2.2. May also be equipped with a pyrotechnic trigger

mechanism containing less than 200 mg net of Div. 1.4S. The backpack must

be packed in such a manner that it cannot be accidentally activated. The airbags

within the backpacks must be ﬁtted with pressure relief valves.

YES YES YES YES NO

Small non-ﬂammable gas cartridges, containing carbon dioxide or other suitable

gas in Division 2.2. Up to two (2) small cartridges ﬁtted into a self-inﬂating safety

device such as a life-jacket or vest. Not more than one (1) device per passenger,

and up to two (2) spare small cartridges per passenger.

How to get ready for travelling:

1- Unscrew the cartridge and activate the system.

2- Screw the cartridges in and fix them with the gripping strap and close the zipper pocket.

3- Do not transport the cartridges in an uninstalled position!

4- Print the IATA document (table 2.3A)

5- Put the IATA document into your airbag backpack and put your airbag backpack into your travel bag.

6- Check in your travel bag at your airline check-in or carry on as cabin luggage.

The current transport regulations for cartridges can be found on following website:

http://www.iata.org/whatwedo/cargo/dgr/Pages/dgr-guidance.aspx

We strongly recommend that you request the IATA guidelines from your respective service center or that you download them yourself

from our website in order to be able to show them at the ticket counter. We also recommend that you put the copy of the IATA guidelines

along with your cartridge, activation handle and backpack in your luggage.

If you are traveling within the USA you need to comply with FAA rules. When travelling to the United States please pay attention to the

latest advice on www.genuineguidegear.com

G3 shall not be liable for any damages or losses due to travel difficulties based upon the ALPRIDE AIRBAG System.

8. ADDITIONAL INFORMATION

8.1. TROUBLE SHOOTING

MALFUNCTION TROUBLESHOOTING

Airbag does not inﬂate fully There might be any of the following reasons for the malfunction:

1- If the cartridge is not properly screwed

2- If the airbag is rolled instead of properly folded

3- Because there is a webbing or something covering and restraining

the zipper

4- The device cover was not closed properly and something is preventing the non

return valve to close properly

Airbag fails to inﬂate when deployed There might be following reason for the malfunction:

1- The system is not loaded

2- The cartridges are used ones

3- The non-return valve is stuck because of some spilled sweet drink or something

similar

Impossible to load the device The handle is not in the up position.

8.2. TECHNICAL DATA

Product Standard: EN16716:2017

Volume of airbag: 150 litres airbags.

Weight of system: 690g without gas cartridges

1130g with gas cartridges

Release: Mechanical release of the spring.

Cartridges: 1 ALPRIDE Argon Cartridge

1 ALPRIDE CO

Cartridge

(Both gas cartridges = 440g).

Carrying system: Complies with the TÜV requirements for extreme operational demands. The tensile strength for all weight

bearing straps equals 3000N (674lbf).

Operating temperature: From -30ºC to +50ºC.

Subject to technical modifications.

Inhaltsverzeichnis

Sprachen:

Andere G3 Zubehör Handbücher

G3 Onyx Leitfaden

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung