Ganz BC-IR3.6N Bedienungsanleitung
1
PRODUCT FEATURES
1. Selection of 420 and 520TV resolution and low light performance surveillance
camera with a built-in 1/3 type CCD
2. Integrated 3.6mm fixed lens
3. Outstanding 0.15/0.30 lux performance with built-in 24 LEDs.
4. Photocell activates IR light at night.
5. Compact and light weight
6. Designed for indoor or outdoor use
SAFETY PRECAUTIONS
OUTDOOR IR COLOR CAMERA
MODEL: BC-IR3.6N / BCH-IR3.6N
5. The installation should be made
by qualified service engineers
and should conform to all local
codes.
6. To prevent fire or electric shock,
do not expose the camera to rain
or moisture.
7. To prevent fire or electric shock,
UL listed wiring should be used
for the DC 12V input.
8. Use only DC 12V regulated
power supply marked class 2.
9. Never attempt to disassemble or
modify the camera.
1. Be sure to connect each lead to the
appropriate terminal. Wrong
connection may cause damage to
the camera.
2. Do not attempt to aim the camera
at the sun or other extremely
bright objects.
3. Do not allow the camera to be
subject to unstable location, strong
shocks and vibration, and strong
electromagnetic field.
4. If any abnormality occurs,
immediately turn off the power
and consult your dealer.
2
1
2
INSTALLATION
1. Use the supplied three screws to attach the bracket to wall. Drill a hole in advance on the proper
position of the wall for the Power and Video Cable to pass through later.
2. Remove the Joint Lock from the bracket by turning it counterclockwise. Then, screw the Joint Lock
to the backside of the camera (turn clockwise)*.
* There are two screw holes on the backside of the camera. Please choose the proper one which best
suits your installation environment. If the upper screw hole is chosen, it’s recommended to push the
Sun Shield a little bit toward the direction of the lens for easy installation.
3. Screw the camera with the Joint Lock connected to the bracket. Adjust the camera angle and the
Sun Shield position. After that, secure the Joint Lock to fix. Then, pass the Power and Video Cable
through the hole drilled in Step 1 to hide it.
CONNECTION
1. Video Output Connector (VIDEO OUT)
Connect the camera video output and the monitor
video input with 75Ωcoaxial cable.
2. DC12V Input Terminal
Connect the power terminal of the camera to a 12V
DC regulated power supply.
Note: Please use the correct power adaptor, DC12V
(regulated), to operate this unit. The power
tolerance of this unit is DC12V ± 10%. Over
maximum DC 12V power input will damage this unit.
Joint Lock
Sun Shield
Power and Video Cable
3
SPECIFICATIONS
Model Name BC-IR3.6N BCH-IR3.6N
TV System NTSC
Scanning system 2 : 1 Interlace
Image Sensor 1/3"-Type Interline transfer CCD
Effective Elements 512(H) x 492(V) 771(H) x 492(V)
Scanning Frequency 15.734kHz(H) x 59.94Hz(V)
Video output 1.0Vp-p /75Ω
Horizontal resolution More than 420 TVL More than 520 TVL
Minimum Illuminance 0.15 Lux / F2.0, 0 Lux (15 meter IR ON) 0.3Lux / F2.0, 0Lux (IR ON)
S/N ratio More than 48 dB (AGC OFF)
Gamma characteristic 0.45
IR Illumination 24 IR LEDs
Sync. System Internal only
Electronic Shutter 1/60 sec. ～1/100K sec.
White balance ATW
Power Supply 12V DC±10%
Power consumption 1.2 Watt (IR OFF)/4.2 Watt(IR ON)
A
mbient temperature
Operation : 0°C to +40°C (14deg F to 122 deg F) /
Storage : -20°C to +60°C (-4 deg F to 140 deg F)
A
mbient humidity(No condensing) Operation : Max. 85%RH / Storage : Max. 95%RH
IP Rating IP67
External dimensions 100mm(L) x 65mm(W) x 63.8mm(H)
Weight 320g
IR camera with a power and video cable * 1
User Manual x 1
Bracket x 1
A
ccessories
Wall Plug and Screw x 3
LENS SPECIFICATIONS
Max. aperture ratio 1 : 2.0
Focal Length 3.6mm
Iris F2.0
D 92.6°
H 76.1
Angle of view (Wide to Tele)
V 58.4
*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
4
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a
product it means the product is covered by the European
Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health.
4. For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Ganz Sicherheitskamera Handbücher
Ganz
Ganz ZC-YHW702 Series Bedienungsanleitung
Ganz
Ganz ZN-MD2xx Series Gebrauchsanweisung
Ganz
Ganz ZC-PT series Bedienungsanleitung
Ganz
Ganz ZC-BNX8312NBA Bedienungsanleitung
Ganz
Ganz PixelPro GXi Series Bedienungsanleitung
Ganz
Ganz Lite VRDDN-2812Y60 Bedienungsanleitung
Ganz
Ganz PIXELPRO SERIES Bedienungsanleitung
Ganz
Ganz ZN-M2AF Bedienungsanleitung
Ganz
Ganz YCX-05 SERIES Bedienungsanleitung
Ganz
Ganz ZN-D100VE Gebrauchsanweisung
Ganz
Ganz ZC-YX270P Bedienungsanleitung
Ganz
Ganz ZC-D8000 SERIES Bedienungsanleitung
Ganz
Ganz ZC-DT8312NHA-IR Bedienungsanleitung
Ganz
Ganz ZN8 Series Bedienungsanleitung
Ganz
Ganz ZN-PTZ550VP(N)E Bedienungsanleitung
Ganz
Ganz DAY/NIGHT VANDAL DOME CAMERA Bedienungsanleitung
Ganz
Ganz ZC-Y41PH4 Bedienungsanleitung
Ganz
Ganz ZN-L7210PHA Bedienungsanleitung
Ganz
Ganz PIXELPRO SERIES Bedienungsanleitung
Ganz
Ganz PixeIPro Series ZN-C2M Bedienungsanleitung
