GE Multilin EPM 7000 Bedienungsanleitung

MULTILIN EPM 7000 - POWER QUALITY METER – QUICK START GUIDE 1–1

Multilin™ EPM 7000

Power Quality Meter

Quick Start Guide

Using the I/O Option Cards

Digital Energy

Using the I/O Option Cards

1.1 Overview

The EPM 7000 meter offers extensive I/O expandability. Using the two universal Option

Card slots, the unit can be easily configured to accept new I/O Option cards even after

installation, without your needing to remove the meter. The EPM 7000 meter auto-detects

any installed Option cards. Up to two cards of any type outlined in this chapter can be used

per meter.

FIGURE 1–1: EPM 7000 Meter Back, Showing Option Card Slots and I/O Card

Option Card Slots

Option Card

GE Publication Code: 1601-0314-A2 (GEK-119660A)

1–2 MULTILIN EPM 7000 - POWER QUALITY METER – QUICK START GUIDE

CHAPTER 1: USING THE I/O OPTION CARDS

1.2 Installing Option Cards

The Option Cards are inserted in one of the two Option Card slots in the back of the EPM

7000 meter.

1.2.1 Safety Precautions

• Remove Voltage Inputs and the power supply terminal to the meter before performing

card installation.

• All electronic components within the EPM Meters are susceptible to damage from

electrostatic discharge. To prevent damage when handling this product use approved

static control procedures.

Note Remove Voltage Inputs and power supply terminal to the meter before performing card

installation.

1. Remove the screws at the top and the bottom of the Option Card slot covers.

2. There is a plastic “track” on the top and the bottom of the slot. The Option card

fits into this track.

Note Perform this procedure on an ESD-safe surface to prevent damage to the EPM Meter

device and its components.

FIGURE 1–2: Detail of Guide Track

3. Slide the card inside the plastic track and insert it into the slot. You will hear a

click when the card is fully inserted. Be careful, it is easy to miss the guide

track.

WARNING!

For safety, remove

ALL these

connections before

installing Option

Cards (GNC, L, N,

Vref, Va, Vb, Vc).

CHAPTER 1: USING THE I/O OPTION CARDS

MULTILIN EPM 7000 - POWER QUALITY METER – QUICK START GUIDE 1–3

• Make sure the I/O card is inserted properly into the track to avoid damaging

the card’s components.

• For proper card fit, and to avoid damaging the unit, insert components in the

following order:

•OptionCard1

•OptionCard2

• Detachable terminal block 1

• Detachable terminal block 2

• Communication connection for Port 2

1.3 Configuring Option Cards

FOR PROPER OPERATION, RESET ALL PARAMETERS IN THE UNIT AFTER HARDWARE

MODIFICATION.

The EPM 7000 meter auto-detects any Option cards installed in it. You configure the Option

cards through GE Communicator software. Refer to Chapter 6 of the GE Communicator

User Manual for detailed instructions.

1–4 MULTILIN EPM 7000 - POWER QUALITY METER – QUICK START GUIDE

CHAPTER 1: USING THE I/O OPTION CARDS

For further assistance

For product support, contact the information and call center as follows:

GE Digital Energy

650 Markland Street

Markham, Ontario

Canada L6C 0M1

Worldwide telephone: +1 905 927 7070

Europe/Middle East/Africa telephone: +34 94 485 88 54

North America toll-free: 1 800 547 8629

Fax: +1 905 927 5098

Worldwide e-mail: multil[email protected]

Europe e-mail: multil[email protected]

Website: http://www.gedigitalenergy.com/multilin

Inhaltsverzeichnis

Andere GE Prüfgeräte Handbücher

GE

GE Druck DPI 620 Bedienungsanleitung

GE

GE ADTS552F Bedienungsanleitung

GE

GE PK-2 Bedienungsanleitung

GE

GE ADTS552F Einrichtungshandbuch

GE

GE Druck TRX-II Bedienungsanleitung

GE

GE PACE5000 Bedienungsanleitung

GE

GE XL VU Bedienungsanleitung

GE

GE Druck DPI 620-IS Bedienungsanleitung

GE

GE Druck DPI612 Bedienungsanleitung

GE

GE PACE5000 Gebrauchs- und Pflegehandbuch

GE

GE FAT Bedienungsanleitung

GE

GE Druck DPI 821 Bedienungsanleitung

GE

GE Druck DPI 880 Bedienungsanleitung

GE

GE Druck UPS-III Bedienungsanleitung

GE

GE Druck UPS-III Bedienungsanleitung

GE

GE Druck DPI 150 Bedienungsanleitung

GE

GE DMS Go+ Bedienungsanleitung

GE

GE Druck ADTS 405 Bedienungsanleitung

GE

GE Druck DPI611 Bedienungs- und Wartungsanleitung

GE

GE EntelliGuard G Bedienungsanleitung

GE

GE Druck ADTS 405 R/F Mk2 Bedienungsanleitung

GE

GE Druck DPI 841 Bedienungsanleitung

GE

GE Multilin MM300 Bedienungsanleitung

GE

GE Druck DPI 610 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung