GE 20622 Bedienungsanleitung

Universal Remote

Instruction Manual

20622

TV DVD

VCR/AUX

INFO

ENTER

Universal

MUTE

Congratulations on your purchase of the 20622 Universal Remote

Control. The 20622 is one of the most easy to use remote controls

available today. With the 20622, juggling multiple remote controls

is a thing of the past! Your 20622 controls up to four devices,

including the most popular brands of TV, VCR, DVD, CBL, and SAT.

The 20622 is easy to use, easy to program, and it gives you total

control—at the touch of your ﬁngertips!

Note: Some functions from your original remote may not be

controlled by this remote. Use the original remote, if available, to

control such functions. Sometimes buttons other than described in

these instructions may actually perform the function. For example,

the CHAN and VOL buttons might be used to navigate through

menu choices. We recommend you experiment with the remote to

identify if such situations pertain to your equipment.

Introduction..................................................................................................................3

Setup ...............................................................................................................................3

Battery Installation ..........................................................................................3

Battery Saver......................................................................................................3

Code Saver...........................................................................................................3

Code Setup..........................................................................................................3

Button Functions ..............................................................................................4

Direct Code Entry..............................................................................................6

Code Search........................................................................................................7

Using Your Remote...................................................................................................8

Code Identiﬁcation...........................................................................................8

Using SHIFT.........................................................................................................9

Controlling Devices with Power On and Off...................................... 11

Controlling Combo Devices ...................................................................... 11

VCR/DVD/DVR Punch-Through ............................................................... 11

Volume/Mute Control and Punch-Through....................................... 12

All Volume/Mute Control to any one Mode ....................................... 12

Setting any Mode for its own Volume/Mute ..................................... 13

Troubleshooting...................................................................................................... 14

Table of Contents

Battery Installation

1. On the back of the remote, push down on the tab and lift the

cover off.

2. Match the batteries to the + and - marks inside the battery

case, then insert 2 AAA Alkaline batteries.

3. Press the battery cover back into place.

Battery Saver

Your remote automatically turns off if the buttons are depressed

more than 30 seconds. This will save your batteries should your

remote get stuck in a place where the buttons remain depressed

(e.g., between the sofa cushions).

Code Saver

You will have up to 10 minutes to change the batteries in your

remote without losing codes you have programmed. However, do

not press any buttons until batteries are installed in the remote. If

buttons are pressed without batteries in the remote, all codes will

be lost.

Code Setup

The SETUP button is used to setup the remote. You can either setup

the remote using the code tables (on separate sheet), or you can

search through the library of codes until you ﬁnd a code that works

for your product. Please refer to “ Code Search” on page 7 for

more information on using the code search feature to learn how to

search through the library of codes for your products.

NOTE: You can store any kind of code under any mode (except TV).

I.E. you can store a DVR code under the CBL/SAT button, or a Cable

code under the DVD/DVR button, etc. However, you can only store

TV codes under the TV button.

Setup

MUTE

VCR/AUX

RECORD, PLAY, STOP, REW, FF, PAUSE

DVR control buttons operate your DVR

even when the remote is set to operate

the TV. Also operates DVD Scan -/+.

Note the VCR buttons also control DVD

when in DVD Mode.

Some buttons on the remote might have functions that are referred

to by different names on the device you are controlling. E.G. PREV.

CH may be called RECALL, or ENTER may be called DISPLAY. These

differences depend on the brand and model of your product. Also,

this remote can only operate features that exist on your product.

E.G., your product must have PREV.CH ability for the PREV.CH

button to operate this feature.

TV, CBL/SAT, VCR/AUX, DVD

selects product to be operated. Red Indicator Lights when

any button is pressed.

INPUT For some TVs, press

repeatedly to select from

available viewing sources

(antenna, cable box, DVR, etc.).

Button Functions

INFO button brings up DVD Display or

Control Menu for Chapter/Track/Title

number, Time remaining/elapsed, system

information, etc. Also displays on-screen

channel information.

MENU Press and release SHIFT/SETUP then

MENU/INFO to display the Menu on the TV.

See “Using SHIFT for Menu and Navigation”

description on Page 9 for more information.

DOT: Used to select digitalchannels, e.g., 2.3.

VOLUME UP/DOWN

changes the volume level

of the product, normally

the TV.

NUMBERS enter numbers for

direct channel selection. Some

products require ENTER to be

pressed after channel selection.

ON•OFF turns product On or Off.

CHANNEL Up/Down

changes the channels.

Button Functions, cont.

SETUP used to setup the remote, and

for code search function.

SHIFT Press and release to access

buttons labeled in reverse print (OK,

MENU, EXIT). See “Using SHIFT for Menu

and Navigation” description on Page 9

for more information.

Note: The REC button must be pressed TWICE to record from your VCR.

For some brands of VCRs, you might need to press the REC button

once, then press it again for three seconds.

ENTER for some TV

models, used after direct

channel number entry to

immediately change to

the selected channel.

MUTE turns off the TV sound

while the picture remains.

OK Selects menu items

for the device you are

controlling.

EXIT Exits On-Screen Menus

and/or Returns to previous

On-Screen selection.

MUTE

VCR/AUX

Device Device stored Code

TV TV

DVD

CBL/SAT

VCR/AUX

Direct Code Entry

1. Press and hold the SETUP button until the red

indicator stays on, then release the SETUP button.

2. Press and release the desired device button (TV,

DVR, etc.). The red indicator blinks, then stays lit.

3. Enter the 4 digit code from the code tables (on

separate sheet). Note: after a valid code entry, the

red indicator turns off. For an invalid

code, the red indicator ﬂashes.

4. With your device on, press ON•OFF.

If the device turns off, no further

programming is required. Note: If

some buttons do not operate your

equipment, try one of the other codes

for your brand.

Write your codes down here for easy reference later.

Code Search

If your device does not respond after you have tried all the codes

for your brand, or if your brand is not listed, try searching for your

code by following these steps.

1. Manually turn on the device (TV, DVR, etc.) to be

controlled.

2. Press and hold the SETUP button until the red

indicator stays on, then release the SETUP button.

3. Press and quickly release the desired device button

(TV, DVR, etc.). The red indicator blinks off once.

4. Press the ON•OFF button repeatedly (up to 300 times)

until the device to be controlled turns off. The red

indicator blinks off with each button press.

5. Press and release ENTER to install the code.

Most users will store VCR codes under the VCR button,

Cable codes under CABLE, etc. If (for example) you want to

store a VCR code under CABLE, ﬁrst follow the procedure for Direct

Code Entry (previous page) and press CABLE in step 2 of Direct

Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry.

Then follow the steps above for Code Search.

Note: Code Search starts from the currently stored four digit

number under that mode. Sometimes the ﬁrst code that “works”

with your device may only allow limited functionality (e.g. the MENU

button might not work). There may be a code that performs more

functions. Continue the code search process until the best code is

found.

Using Your Remote

Code Identiﬁcation

The Code Identiﬁcation Feature allows you to identify the four digit

library code stored under your device button. For example, if you

want to ﬁnd out what four digit code is stored under your TV device

button, follow the six steps below:

1. Press and hold the SETUP button until the red

indicator stays on. Release the SETUP button.

2. Press and release the desired device button (TV,

DVR, etc.). The red indicator blinks, then stays lit.

3. Press and release the SETUP button. The red

indicator blinks once and remains lit.

4. To ﬁnd the ﬁrst digit for the code stored under the

device button pressed in step 2, press each numeric

button from 0-9 in turn. The number that causes

the indicator light to blink is the ﬁrst

digit in your code.

5. To ﬁnd the second digit, repeat step 4.

6. Repeat step 4 to ﬁnd the third and

fourth digit.

Using SHIFT for Menu and Navigation

The SHIFT button allows access to more than

one function for certain buttons.

Use the SHIFT/SETUP button prior to

accessing the MENU, OK, EXIT and Navigation

functions, for example:

For MENU, press and release

SHIFT/SETUP then MENU/INFO.

For OK, press and release

SHIFT/SETUP then OK/MUTE.

For EXIT, press and release

SHIFT/SETUP then PREV.CH/EXIT.

For Up, Down, Left or Right

Navigation, press and release SHIFT/

SETUP followed by the respective

Channel or Volume button.

Using Your Remote, cont.

Controlling Devices with Separate Power On and Off Buttons

Some GE, RCA and ProScan models require you to press the device

button for more than one second to turn the device on and the

ON•OFF button to turn the device off.

Controlling Combo Devices

Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) will

require you to set up two different Mode buttons to control both

parts of the Combo device. For example, if you have a TV/DVD

Combo, you might need to set up one code under the TV button to

control the TV part AND a separate code (under any other Mode

button) to control the DVD part.

VCR/DVD Punch-Through

This remote allows the 6 VCR transport buttons (i.e. PLAY, PAUSE,

STOP, FF, REWIND, and REC) to Punch-Through control from any

Mode programmed with TV, SAT or Cable codes to the last VCR, or

DVD programmed Mode you used. This feature will not operate if

the programmed TV, SAT or Cable code has its own VCR transport

button control e.g. a TV Combo, SAT/PVR, etc.

Andere Handbücher für 20622

Inhaltsverzeichnis

Beliebte Universalfernbedienung Handbücher anderer Marken

Pronto

Pronto Peel Bedienungsanleitung

Radio Shack

Radio Shack Wireless Remote Control System Bedienungsanleitung

AUVIO

AUVIO Universal Home Theater Remote Bedienungsanleitung

Philips

Philips Icon SRU4106 Bedienungsanleitung

THOMSON

THOMSON ROC4309 Bedienungsanleitung

Philips

Philips pm625S Bedienungsanleitung

RCA

RCA RCU600WMS - Universal Remote Control Bedienungsanleitung

Blackweb

Blackweb BWB17AV002 Bedienungsanleitung

Marmitek

Marmitek DoorGuard 300 Bedienungsanleitung

Chunghop

Chunghop RM-L618 Bedienungsanleitung

Anderic

Anderic KTN828 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Bedienungsanleitung

Medion

Medion E74023 Bedienungsanleitung

intensity

intensity RM02A Bedienungsanleitung

Sky

Sky MY Bedienungsanleitung

RCA

RCA RCU600M - Universal Remote Control Bedienungsanleitung

Savant

Savant SUR-0500 Kurzanleitung

GDI

GDI GDI-WT2K Bedienungsanleitung