Geemarc DALLAS10 Bedienungsanleitung

Big Button Telephone With VolumeControl

Téléphone À Grandes Touches Avec

Réglage De Volume

Groβtastentelefon mit Lautstärkeregelung

If you are using this telephone with a hearing aid, set your

hearing aid to the «T» setting.

Si vous utilisez ce téléphone avec une aide auditive,

basculez-la sur la postion T.

Sollten Sie diese Telefon mit einer Hörhilfe verwenden, so

stellen Sie diese bitte auf den «T» - modus.

English 2~9

Français 10~17

Deutsch 18~26

English:

!!! Please refer to our website:

www.geemarc.com for an up to

date user guide, as there may be

important updates and changes

you need to be aware of.!!!

Français:

!!!Voir sur notre site internet si

une version plus récente de cette

notice d’utilisation est disponible.!!!

Deutsch:

!!!Prüfen Sie auf unserer Website

ob eine neuere Version dieser

Bedienungsanleitung verfügbar

ist.!!!

General Description

(*) Classified TNV-3 according to EN60950 standard.

(**) Please note that this switch is not to be moved after setting.

SETTING UP

Line cord

socket* Indirect

memory

button

3 direct

memories

Ringer

On / Off

Sending

level

switch

Pule /

Tone

switch**

Handset

Last number

redial

Time break

recall button

Memory

storing key

Volume

reception

adjustment

1 - CONNECTING TELEPHONE

1 - Connect the handset cord.

2 - Connect the line cord to the socket located at rear of

telephone then connect the PTT plug*.

2 - RINGER SETTINGS

A switch located on right side allows the ringer to be

switched On ( ) or Off ( ).

3 - WALL MOUNTING

To wall-mount your telephone, slide out the clip turn

around and slide back into the wall mounting position

(located in the base unit, just below the ear piece).This

will ensure that the handset stays firmly in position.

Make 2 holes in the wall 85mm apart, insert the wall

plugs and the wall mounting screws. The screws should

protrude from wall by 6-7mm. Place the phone onto the

screw-heads and slide down to secure.

4 - TONE/PULSE SWITCH (T/P)**

The Tone/Pulse switch is factory pre-set to Tone

position (T).In the UK, all telephone exchanges now use

Tone dialing. If your phone does not dial out it is

probably being used from an older private switch board

(PBX). In this case, the Tone/Pulse switch must be

moved to Pulse (P).

SETTING UP

1 - ANSWERING INCOMING CALL

- When an incoming call is received the phone will ring

and flash. To answer the call lift the handset and speak.

- On completion of the call, carefully replace the handset

in the cradle to release the line.

2 - VOLUME RECEIVING ADJUSTMENT

You can increase the volume according to your own

hearing requirements.

Use the VOL button, located on the right side, to adjust

the level according to your own hearing requirements.

3 - MAKING A CALL

- Lift the handset.

- Await the dial tone and dial required number.

- On completion of the call, carefully replace the handset

in the cradle.

USING THE PHONE

4 - SENDING LEVEL ADJUSTMENT

If your voice is quiet or called parties have difficulty

hearing you, you can increase the sending level volume

with the switch located on the right side.

5 - LAST NUMBER REDIAL

- Lift the handset.

- Await the dial tone and press button.

- The previously dialled number will be automaticaly

redialled (not in use for memory numbers).

6 - R, * & # BUTTONS

These are used with the new services provided on

digital exchanges. For details please contact your

network operator.

7 - STORING TELEPHONE NUMBERS

Your phone can store 3 direct and 10 indirect memories

(16 digits maximum for each memory).

- Lift the handset.

- Press button.

- Dial the telephone number you wish to store.

USING THE PHONE

- Press button.

- Press one of the direct memory buttons, M1, M2, M3.

Or press MEM and any button 0 to 9 on the key pad

under which you wish to store the telephone number in

indirect memory.

- Replace the handset.

Note: Numbers will be lost if you disconnect your phone.

Entering a new number in memory will automatically

erase the previous number.

8 - DIALLING STORED NUMBER

- Lift the handset and await the dial tone.

- Press appropriate direct memory button M1, M2, or M3.

The stored number will be dialled out automatically.

Or press the MEM button followed by the keypad 0 to 9

button under which the desired number is stored. The

stored number will be dialled out automatically.

To register your stored phones numbers, use the index

located on the base.

USING THE PHONE

General

Do not open the unit. Contact the helpline for all repairs.

The phone is capable of amplifying sounds to a loud

volume. It is important to instruct all potential users of its

proper operation. It is advised to adjust the volume

control to its minimum level (Low) when not in use and

alert other users that hearing damage can potentially

result from misuse.

Cleaning

Clean the telephone with a soft cloth. Never use

polishes or cleaning agents - they could damage the

finish or the electrics inside.

Environmental

Do not expose to direct sunlight.

Always ensure there is a free flow of air over the

surfaces of the telephone.

Do not place any part of your product in water and do

not use it in damp or humid conditions e.g. bathrooms.

Do not expose your product to fire or other hazardous

conditions.

Unplug your phone from the telephone socket during

thunderstorms because it could damage your telephone.

Your guarantee does not cover thunderstorm damage.

The telephone is designed for working within a

temperature range of 5°C to 45°C.

SAFETY INFORMATION

From the moment your Geemarc product is purchased,

Geemarc guarantee it for the period of two years. During

this time, all repairs or replacements (at our discretion)

are free of charge. Should you experience a problem

then contact our help line or visit our website at

www.geemarc.com. The guarantee does not cover

accidents, negligence or breakages to any parts. The

product must not be tampered with or taken apart by

anyone who is not an authorized Geemarc

representative. The Geemarc guarantee in no way limits

your legal rights.

IMPORTANT: YOUR RECEIPT IS PART OF YOUR

GUARANTEE AND MUST BE RETAINED AND

PRODUCED IN THE EVENT OF A WARRANTY CLAIM.

DECLARATION: Geemarc Telecom SA hereby

declares that this product is in compliance with the

essential requirements and other relevant provisions of

the Radio and Telecommunications Terminal Equipment

Directive 2014/53/UE and in particular article 3 section

1a, 1b and section 2. The telephone does not operate if

the line current is lower than 18 mA.

The declaration of conformity may be consulted at

www.geemarc.com

Please note: The guarantee applies to

the United Kingdom only

GUARANTEE

Telephone connection: Voltages present on the

telecommunication network are classified TNV-3

(Telecommunication Network Voltage) according to the

EN60950 standard.

The WEEE (Waste Electrical and Electronic Equipment)

has been put in place for the products at the end of their

useful life are recycled in the best way.

When this product is finished with, please do not put it in

your domestic waste bin.

Please use one of the following disposal options:

- Remove the batteries and deposit them in an

appropriate WEEE skip. Deposit the product in an

appropriate WEEE skip.

- Or, hand the old product to the retailer. If you purchase

a new one, they should accept it.

Thus if you respect these instructions you ensure human

health and environmental protection.

For product support and help visit our website at

www.geemarc.com

Telephone 01707 387602

Or fax 01707 832529

RECYCLING DIRECTIVES

Inhaltsverzeichnis

Sprachen:

Andere Geemarc Telefon Handbücher

Geemarc

Geemarc CL1400 Bedienungsanleitung

Geemarc

Geemarc Ampli500 Bedienungsanleitung

Geemarc

Geemarc Amplidect Combi-Photo 295 Gebrauchsanweisung

Geemarc

Geemarc T300 Bedienungsanleitung

Geemarc

Geemarc RP7510 Bedienungsanleitung

Geemarc

Geemarc CL555 Bedienungsanleitung

Geemarc

Geemarc Ampli100VM Bedienungsanleitung

Geemarc

Geemarc Dialatron Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Geemarc

Geemarc AMPLIDECT COMBI 595 Bedienungsanleitung

Geemarc

Geemarc MAYFAIR Bedienungsanleitung

Geemarc

Geemarc ClearSound Amplidect COMBI355 Bedienungsanleitung

Geemarc

Geemarc Dallas 10 Bedienungsanleitung

Geemarc

Geemarc CL610 Bedienungsanleitung

Geemarc

Geemarc CLEARSOUND PhotoPHONE Bedienungsanleitung

Geemarc

Geemarc AMPLI600 Bedienungsanleitung

Geemarc

Geemarc SOLAR4 Bedienungsanleitung

Geemarc

Geemarc Apollo Bedienungsanleitung

Geemarc

Geemarc Jupiter 4 Bedienungsanleitung

Geemarc

Geemarc Petite Trac Bedienungsanleitung

Geemarc

Geemarc Jupiter 3 Bedienungsanleitung

Geemarc

Geemarc ClearSound CL64 Bedienungsanleitung

Geemarc

Geemarc PhotoTEL Bedienungsanleitung

Geemarc

Geemarc Ampli455 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

D-Link

D-Link DWR-720/PW Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Panasonic

Panasonic KX Series Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung