Gefen MS Bedienungsanleitung

www.gefen.com

CAT-5 MS

Extreme Extender

EXT-HDMI-CAT5-MS

User Manual

Technical Support:

Telephone (818) 772-9100

(800) 545-6900

Fax (818) 772-9120

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday PST

Write To:

Gefen Inc.

c/o Customer Service

20600 Nordhoff St

Chatsworth, CA 91311

www.gefen.com

[email protected]

Notice

Gefen Inc. reserves the right to make changes in the hardware, packaging and

any accompanying documentation without prior written notice.

HDMI CAT-5 MS Extreme is a trademark of Gefen Inc.

All trademarks are the property of their respective companies.

ASKING FOR ASSISTANCE

Rev B1

CONTENTS

1 Introduction

2 Operation Notes

3 Features

4 Sender Panel Descriptions

5 Receiver Panel Descriptions

6 Connecting and Operating the HDMI CAT-5 MS Extreme

7 Service Switch Usage Guide

8 Additional DIP Switch Functions

9 Network Cable Wiring Diagram

10 Mounting Plate Installation

11 Terminology

12 Speciﬁcations

13 Warranty

Congratulations on your purchase of the HDMI CAT-5 MS Extreme. Your complete

satisfaction is very important to us.

Gefen

Gefen delivers innovative, progressive computer and electronics add-on solutions

that harness integration, extension, distribution and conversion technologies.

Gefen’s reliable, plug-and-play products supplement cross-platform computer

systems, professional audio/video environments and HDTV systems of all sizes

with hard-working solutions that are easy to implement and simple to operate.

The Gefen HDMI CAT-5 MS Extreme

The HDMI CAT-5 MS Extreme Extender extends your HDTV display up to 300 feet

away from your HDTV source using two CAT-5 cables. It is equipped with HDMI

(high deﬁnition multimedia interface) connectors and is capable of supporting DVI

(digital visual interface) equipment when used with a HDMI to DVIAdapter, provid-

ing greater ﬂexibility and options when integrating several home theater compo-

nents.

How It Works

The HDMI CAT-5 Extreme-S sender unit sits next to your computer, set-top box or

DVD player source. Cables supplied with the HDMI CAT-5 MS Extreme connect

your DVI or HDMI source to the send unit. The HDMI CAT-5 Extreme-R receive

unit sits next to your HDTV display - up to 300 feet away. The display plugs into the

back of the HDMI CAT-5 MS Extreme-R receiver unit. Two CAT-5 cables connect

the sender and the receiver units to each other.

INTRODUCTION

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE HDMI CAT-5 MS EXTREME

• The HDMI CAT-5 MS Extreme units are housed in a metal box for better RF

shielding.

• Your CAT-5 cable should not exceed 300 feet.

• If you do not need DDC or HDCP data you can use a single CAT-5 cable for the

video only. The DDC will not be connected. (For further information, see our

Terminology section on page 11.) If HDCP is required, both CAT-5 cables must

be used between the sender and receiver units.

• If the source requires EDID present, you can use the Gefen HDMI Detective to

provide EDID information to your source but will not transmit HDCP.

• Shielded CAT-6 with metal RJ-45 connectors is recommended to protect from

random ﬂashes caused by EMI.

• Power supply for the receiver should not be connected unless you are using one

CAT-5 or going over a distance of 200ft.

• Extensions over 130ft. require you to manually EQ your signal (see page 7).

• Extensions under 130ft. use Auto EQ (which is on by default) (see page 7).

• The extender is factory set toAuto EQ which will work for distances under 130 ft.

• This product features the option to force the output colorspace to RGB and/or use

a pre-programmed EDID. These features can be used to resolve speceﬁc user

issues or for troubleshooting purposes. Please see page 8 for more information.

OPERATION NOTES

Features

• Extends high deﬁnition displays up to 150 feet from the source at 1080p

• Extends high deﬁnition displays up to 300 feet from the source at 1080i

• Improved compensation for cable skew

• Eliminates equipment noise in the viewing environment

• Supports resolutions up to 1080p, 2K, and 1920 x 1200

• Audio and video are transmitted digitally over the CAT-5e cable for zero signal

loss

• HDMI compliant

• HDCP compliant

Package Includes

(1) HDMI CAT-5 MS Extreme Sender Unit

(1) HDMI CAT-5 MS Extreme Receiver Unit

(1) 6 foot HDMI cable (M-M)

(2) 5V DC Power Supply

(1) User Manual

FEATURES

Front Panel

Back Panel

RJ-45 Input

Video RJ-45 Input

DDC

SENDER PANEL DESCRIPTIONS

HDMI Input

Power LED

Indicator

5V DC Power

Supply Input

Front Panel

Back Panel

RJ-45 Input

Video RJ-45 Input

DDC

RECEIVER PANEL DESCRIPTIONS

HDMI Output 5V DC Power

Supply Input

Power LED

Indicator

EQ Trimpot

AUTO EQUALIZATION

1. Connect the HDMI source to the HDMI CAT-5 MS Extreme sending unit’s HDMI

input port using the supplied HDMI cable.

2. Connect the HDMI CAT-5 MS Extreme sending and receiving units together

using two user supplied CAT-5, CAT-5e or CAT-6 cables.

NOTE: If ﬁeld terminating network cable, please adhere to the TIA/EIA568B

speciﬁcation. Please see page 9 for more information.

3. Connect the display to the HDMI output port of the HDMI CAT-5 MS Extreme

receiving unit using a user supplied HDMI cable.

4. Plug the 5V DC power supply into the HDMI CAT-5 MS Extreme sending unit.

NOTE: In most scenarios, the 5V DC external power supply for the receiving

unit will not be required. Operational power is supplied by the sending unit via

the connected CAT-5, CAT-5e or CAT-6 cable. If the power LED indicator on the

receiving unit is not on, please check to make sure that the RJ-45 cables are not

crossed (DDC to video and video to DDC).

5. Power on the display.

6. Power on the source.

The HDMI CAT-5 MS Extreme has built-in auto equalization that will automatically

tuneout any unwanted video noise. This feature is reliable withpremium cableruns

up to a maximum of 130 feet. It may be necessary to disable this feature if there is

either no video being displayed on initial start-up, there is video noise in the image,

or the cable run exceeds 130 feet. First, verify that all the proper connections have

been made and that all devices are powered on before attempting to disable auto

equalization.

CONNECTINGAND OPERATING THE HDMI CAT-5 MS EXTREME

The sender and receiver units both have sets of DIP switches located on the

underside of their casings. There is a piece of silver metallic tape that must be

removed to expose these DIP switches. Each unit carries a bank of 4 DIPswitches.

Dip switches 1 and 2 on the sending unit and DIP switch 1 on the receiving unit are

used in this procedure. By default, all DIP switches on the receiving units should

be in the OFF position (Auto EQ On). DIP switch 2 on the sending unit should be in

the ON position (No Boost). To turn off auto equalization, turn DIP switch 1 on the

receiving unit to the ON position (Auto EQ off). With this setting please follow the

steps below to equalize the picture.

1. Insert a small ﬂat head tool into the trimpot on the receiver unit.

2. Turn the trimpot in a clockwise fashion until it comes to a stop. Do not force the

trim pot beyond this point. Doing so may break the trim pot.

3. Slowly turn the trimpot counter-clockwise in millimeter increments until the

image stabilizes and all video noise disappears.

4. Carefully remove the adjustment tool.

NOTE: If your cable run is beyond 130 feet, or the following steps do not produce

any video, it may be necessary to increase the boost from the sending unit. Use

the chart below to increase the boost by changing the sender DIP switches. Once

a new boost setting is set, repeat steps 1 through 4 from above.

Sender DIP Switch Settings

Setting Switch 1 Switch 2

No Boost (Default) OFF ON

Medium Boost OFF OFF

High Boost ON OFF

Not Used ON ON

Receiver DIP Switch Settings

Setting Switch 1 Switch 2

Manual EQ ON OFF

Auto EQ (Default) OFF OFF

Adjustment Guidelines:

1. Strong boost should not be used on stranded cables. Strong boosting will cause

pixels or no picture on these cables.

2. Using the wrong settings will not damage the units; it will either produce no image

or a noisy image.

3. To eliminate the possibility of cross talk and interference, cables must be

terminated with 568B scheduling. (See page 9 for details)

4. No Boost should be set when using Auto EQ.

SERVICE SWITCH USAGE GUIDE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Gefen Extender Handbücher

Gefen

Gefen EXT-CAT5-1600A Bedienungsanleitung

Gefen

Gefen EXT-DVI-2500HD Bedienungsanleitung

Gefen

Gefen EXT-DP-CP-FM10 Bedienungsanleitung

Gefen

Gefen EXT-COMPOS ITE -141N Bedienungsanleitung

Gefen

Gefen HDMI CAT-5 Bedienungsanleitung

Gefen

Gefen HDKVM ELR extension for HDMI and USB Over One... Bedienungsanleitung

Gefen

Gefen EXT-USB-MINI2N Bedienungsanleitung

Gefen

Gefen EXT-DVIRS232-1FO Bedienungsanleitung

Gefen

Gefen EXT-DIGAUD-141 Bedienungsanleitung

Gefen

Gefen EXT-HDKVM-ELR Bedienungsanleitung

Gefen

Gefen EXT-DVI-ELR Bedienungsanleitung

Gefen

Gefen EXT-HDTV-CAT5 Bedienungsanleitung

Gefen

Gefen CAT5-9000 Bedienungsanleitung

Gefen

Gefen ex-tend-it CAT5-1000 Bedienungsanleitung

Gefen

Gefen DVIRS232-CAT5 Bedienungsanleitung

Gefen

Gefen EXT-DVI-FMP Bedienungsanleitung

Gefen

Gefen EXT-DVI-1CAT6 Bedienungsanleitung

Gefen

Gefen CAT5-5600HD Bedienungsanleitung

Gefen

Gefen USB 2.0 LR Extender EXT-USB2.0-LR Bedienungsanleitung

Gefen

Gefen DVI-FM1000 Bedienungsanleitung

Gefen

Gefen USB-500 Bedienungsanleitung

Gefen

Gefen ToolBox GTB-USB2.0-4LR Bedienungsanleitung

Gefen

Gefen EXT-DV- 3600HD Bedienungsanleitung

Gefen

Gefen FW-1394B Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung