Gen3 Verve Bedienungsanleitung
ELECTRIC SCOOTER
OWNERS MANUAL
Welcome to GEN3™
Thank you for choosing a GEN3
™
Electric Scooter!
Nothing beats the joy of riding! We want you to get out there
and have fun. But, first... please read the manual.
If you have questions after reading this guide visit the support
Contact us for help here:
Website: support.gen3ride.com
Email:[email protected]
Phone: 1-888-884-GEN3 (4363)
The triangular caution symbol accompanies notices that require special attention.
Users should also pay special attention to information in bold or beginning with NOTICE.
THIS INSTRUCTION GUIDE CONTAINS IMPORTANT SAFETY AND PERFORMANCE INFORMATION.
Please read this guide thoroughly before you take your first ride on your new GEN3 Electric
Scooter and keep it nearby for reference.
This instruction guide applies to all GEN3 Electric Scooters.
Visit support.gen3ride.com for updates and the latest copy of this manual.
The Verve Pro
The Verve
1
Adjusting the Handlebar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Daily Care & Maintenance
Cleaning & Storage . . . . . . .. . . . . . . . . . . . . . . . . . . . . . 15
Battery Maintenance . . . . . . . . . . . . . . . . . . . . . . . 15-16
Important Safety Instructions . . . . . . . . . . . . . . . . . 16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Limited Warranty
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Warranty Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Shipping Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Credit Card Chargebacks . . . . . . . . . . . . . . . . . . . . . 20
Claims Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Assembly Video & Online Resource Links . . . . . . . . . . . . . . . 21
Contact Us for Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
TABLE OF CONTENTS
General Information | Read Before Your First Ride
Safe Operating Tips . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Local Laws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Brakes, Quick Release . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Scooter Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Assembly
List of Loose Parts & Contents . . . . . . . . . . . . . . . . . . 7
Box Opening . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . 7
Assembly & Setup . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 7-8
Scooter Interface & App Operation
GEN3 Verve Scooter Interface . . . . . . . . . . . . . . . . . . 9
GEN3 Verve App, Pairing with Bluetooth® . . . . . . 9
How to Ride Your Scooter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Scooter Safety - Best Practices . . . . . . . . . . . . . . . . . . . . . . . . 11-12
Folding & Carrying your Scooter . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2
GENERAL INFORMATION | READ THIS BEFORE YOUR FIRST RIDE
SAFE OPERATING TIPS
•
Even if you are an experienced scooter rider, all riders should read and understand this manual before using an electric scooter. For your
safety and to avoid serious injury or death, please closely review the following safety tips for safe operation of your GEN3 Electric Scooter.
• Always wear shoes, a helmet and knee/elbow pads when riding this product. Approved helmets in the U.S. must meet the U.S. Consumer Product
Safety Commission standard. Helmets sold in Canada are certified by CSA (Canadian Standards Association), CPSC (Consumer Product Safety
Commission), Snell or ASTM (American Society for Testing and Materials). Failure to wear a helmet when riding may result in serious injury or death.
•
Inspect the scooter before each use, making sure the correct setup and tightening is done on your scooter before using it for the first
time. Check the battery level, brake function, handlebar grips, tightening and lubricating components regularly.
•
Check the operation of the brake motor cutoff before each ride. The brake system, when properly functioning cuts off power to the
motor whenever the brakes are squeezed.
• The boost function on electric scooters can be unfamiliar for first time riders. Ensure you understand and are prepared for the motor to engage.
•
Always use the lightest boost level, until you are comfortable and confident with the scooter.
•
Users must travel at speeds appropriate for the usage area, riding conditions, and experience level. The faster the scooter is traveling,
the longer it takes to stop. On a smooth surface, the scooter may slip, lose balance, and even result in a fall. Thus it is crucial that you use
caution, keep proper speed and distance, especially so when you are unfamiliar with the environment.
• Off-road scootering presents varied terrain on which The Verve and The Verve Pro are not designed or tested to perform.
•
Electric scooters are not intended for large jumps or stunts of any kind. Scooter frames and parts have limitations, and extreme riding
should not be performed.
•
In the event of a collision or presumed damage, you must consider your scooter unsafe to ride until a comprehensive inspection of all
components, functions, and operations of the scooter can be made by a certified, reputable mechanic.
•
Any aftermarket changes or modifications to your scooter could void the warranty and create an unsafe riding experience.
•
Take extra precaution when riding in wet conditions or on a smooth surface. Decrease speeds and prepare for increased braking
distance. Handlebar and scooter deck will be slippery in wet conditions.
•
It is your responsibility to understand the local regulations, including traffic laws, for operating this product in the area(s) where you ride.
•
NEVER operate your scooter when you are under the influence of alcohol or drugs, including prescribed or over the counter medications.
•
Ride at night only if necessary. Wear reflective clothing; if possible, only scooter down roads with ample street lighting. Ensure you have
reflectors and lights as required by your regional vehicle laws.
3
•
Respect pedestrians’ Right of Way. When you ride from behind pedestrians, ring the bell and use your voice to gain attention and slow
your scooter to pass on their left. Travel at a reduced speed or consider walking scooter.
•
Failure to properly charge, store, or use your battery will void the warranty and may cause a hazardous situation.
•
Failure to perform and confirm proper installation, compatibility, proper operation, or maintenance of any component or accessory
can result in serious injury or death.
•
This product is not intended for use at elevations greater than 6562 ft. / 2000 m.
LOCAL LAWS
Regulations related to the use and operation of electric scooters vary based on the country, state/province, county and municipality in
which the rider may live. In many cases, the regulations for the use of an electric scooter are the same as those for a standard bicycle.
However, each jurisdiction may have laws regarding licenses and regulations of electric scooters, where you can ride, minimum rider age,
or required equipment, such as helmets. It is the rider’s responsibility to know the local regulations that apply to an electric scooter and to
obey them.
BRAKES
Make sure the brakes are working with proper stopping power. The levers should stop short of touching the handlebar. Riding with
improperly adjusted or worn brakes is dangerous and can result in injury or death. Replace worn brakes with authorized replacements.
QUICK RELEASE AND FASTENERS
It is important to check the quick release that keeps the folding mechanism in place is properly closed and tightened. Achieving correct
tightening force is vital. Using too little force may result in the fastener not holding securely, while too much force may cause the fastener
to strip threads, deform, or break. Incorrect tightening may result in component failure and cause loss of control and/or accidents. If you
have any questions, please visit a reputable repair shop for assistance.
SAVE THESE INSTRUCTIONS
4
Front Wheel
Motor
Charging Port
Buckle
Battery
Compartment
Kickstand
Brake Light
Clamp
Throttle
Headlight
Brake Lever Scooter Bell
LED Display
SCOOTER COMPONENTS
THE VERVE SCOOTER
Bell
Brake
When in motion,
push to accelerate
Throttle
Display
Power Button
Clip
Secures the steering
column to the buckle
when folded.
5
THE VERVE PRO SCOOTER
Battery
Compartment
Rear Wheel Motor
Brake Light
Scooter Bell
LED Display
Throttle
Clamp
Brake Drum
Charging Port
Headlight
Brake Lever
Kickstand
Buckle When in motion,
push to accelerate
Clip
Throttle
Power Button
Display
Bell
Brake
Secures the steering
column to the buckle
when folded.
6
LIST OF LOOSE PARTS & CONTENTS
CONTAINED IN THE SCOOTER BOX:
• Partially Assembled Scooter Frame
• Handlebar
• Accessories Box
• User Manual and Quick Start Guide
ASSEMBLY Assemble your scooter:
Scan the QR Code
or go to
www.GEN3Ride.com
STEP 1 - FOLD STEM UP
Fold stem up and lock clamp into place. Put the
kickstand down.
STEP 2 - ATTACH HANDLEBAR
Attach the handlebar to the stem while making
sure wiring stays inside tube.
STEP 3 - TIGHTEN SCREWS
Tighten the screws onto all sides of the stem with
the hexagon wrench.
CONTAINED IN THE ACCESSORIES BOX:
• Screw x 4 (The Verve)
• Screw x 6 (The Verve Pro)
• Charging Adapter
• Hexagon Wrench
ASSEMBLY & SETUP
BOX OPENING:
•
Carefully remove scooter from box to avoid scratching the scooter or cutting the wiring.
•
Please do not dispose of the packaging until after the no-questions-asked return period has passed.
7
STEP 4 - CHECK INTERFACE
After assembly, press the power button to verify
interface display is working properly.
STEP 5 - CHARGE YOUR SCOOTER
Lift up the
rubber flap.
Plug power adapter
into charging port.
Once Charging is
complete put back
rubber flap.
8
Search and download
the “GEN3 Verve” app
on the Apple or
Google Play store.
SCOOTER INTERFACE & APP OPERATION
GEN3 Verve Scooter Interface
The Verve and Verve Pro models are equipped with an LED
display which highlight your:
1. Boost Levels 1, 2, 3
2. Walk Assist Mode
3. Fault indicator with In-App Troubleshooting
4. Speedometer
5. Battery Level
6. Bluetooth® connection to the Gen3 Verve App
7. Headlight & Taillight
8. Cruise Control
GEN3 Verve App
The Verve and Verve Pro models have Bluetooth® chipsets allowing them to
connect to the GEN3 Verve App on iOS and Android giving access to:
•
Current Speed
•
Toggle Between mph and km/h
•
Lock and Unlock the Scooter
•
Boost Level
•
Odometer
12 3
4
5
6 7 8
Power Button
Long Press:
Power On/Off
Short Press:
Cycles through boost
levels 1, 2, 3, and walk assist
Double Press:
Headlight & Tailight On/Off
•
Headlight & Taillight
•
Trip Distance
•
Self-diagnostics with Curated
Troubleshooting Steps Displayed In-App
9
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Gen3 Roller Handbücher
Beliebte Roller Handbücher anderer Marken
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Bedienungsanleitung
Carrera
Carrera impel Bedienungsanleitung
Afikim
Afikim Superlight SL-3 Bedienungsanleitung
CareCo
CareCo ZOOM Bedienungsanleitung
Douglas
Douglas Vespa G.S. Bedienungsanleitung
Gazelle
Gazelle with BOSCH System Bedienungsanleitung