General DCS200 Bedienungsanleitung

VIDEO INSPECTION SYSTEMS

Please read this manual carefully and thoroughly before using this product.

DCS200/DCS300

USER’S MANUAL

THE SEEKER 200 &

THE SEEKER 300

DCS200-300 MANUAL 071609 FINAL:Manual 7/16/09 1:25 PM Page 1

C NTENTS

Introduction ....................................3

Features .......................................3

Safety Instructions .............................4

Product Com onents ...........................5

Installation .....................................6

BatteryInstallation ..................................6

BatteryPrecautions..................................6

Connecting the Display Unit to the Camera ead and Probe 7

AccessoriesInstallation ..............................7

O eration Instructions ..........................8

BasicOperation.....................................8

OperationPrecautions.............................8-10

Maintenance Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 10-11

TroubleShooting ...................................11

S ecifications .................................12

Cautions ......................................13

Warranty Information ...........................13

DCS200-300 MANUAL 071609 FINAL:Manual 7/16/09 1:25 PM Page 2

INTR DUCTI N

The Seeker 200 and The Seeker 300 inspection syste s have

been designed as a user friendly and econo ical way of solving

hidden proble s and increasing productivity. The product has

a high clarity color LCD to show clear i ages. The ca era head

is housed inside the tip of the probe with adjustable LED lights,

which helps you to reach into gaps and holes. The irror tip

is included to ake it possible to view different angles. The

agnetic tip is used to pick up s all etal objects. The hook

is used to grab onto objects.

The video inspection syste s have the advantages of clear

i ages, easy operation and portability. It is widely used in

applications such as HVAC/R building, aviation and vehicles

aintenance.

FEATURES

•DCS200: 2.4" (70mm) Color LCD Screen

for crystal clear image

•DCS300: 3.5" (88.9mm) Color LCD Screen

for superb clarity and viewing effect

• 0.47" (12mm) diameter Camera-tipped Probe is flexible

and strong with built-in adjustable LED lighting, and is

slim enough to perform automotive engine check-up

• Flexible Probe retains configured shape to suit

different inspection needs

• View findings instantaneously

• Mirror, Magnet and Pick-up ook

DCS200-300 MANUAL 071609 FINAL:Manual 7/16/09 1:25 PM Page 3

SAFETY INSTRUCTI NS

Failure to follow the instructions listed below may result in

electric shock or personal injury.

• Read and understand all instructions prior to any operation.

• Do not remove any labels from the product.

dark areas may cause accidents.

• Do not operate the product in the presence of

flammable/explosive gases.

• Do not use the product around corrosive chemicals

which can ruin the picture quality.

• Keep bystanders, children and visitors away

while operating the product.

• Stay alert, watch what you are doing and use common

sense. A moment of interruption can result in serious

personal injury.

• Do not over-reach. Keep proper footing and balance

at all times.

• Always wear eye protective gear. Dust mask, non-skid

safety shoes, hard hat or hearing protection must be used

for appropriate conditions.

• Do not place the product on any unstable cart or surface.

The product may fall causing serious injury to a person or

serious damage to the product.

• Never spill liquid of any kind on the video display units.

Liquid increases the risk of electrical shock and damage

to the product.

• Do not use the device for personal or medical use.

• The units are not shock-resistant. Do not drop it.

DCS200-300 MANUAL 071609 FINAL:Manual 7/16/09 1:25 PM Page 4

PR DUCT C MP NENTS

1. and eld Display Unit

2. Camera ead and Probe

3. Magnetic Tip

4. ook Tip

5. Mirror Tip

A. LCD Screen

B. Battery Compartment

C.Switch / LED Lighting Adjusting Button

D.Probe Connector

E. Probe

F. Camera ead

DCS200-300 MANUAL 071609 FINAL:Manual 7/16/09 1:25 PM Page 5

INSTALLATI N

BATTERY INSTALLATI N:

1. Use a screwdriver to open the screw on the battery

compartment cover (See Fig. 4).

2. Insert one “9V” alkaline battery (6LR61) into the battery

compartment. Close the battery cover and fasten

the screw (See Fig. 5).

BATTERY PRECAUTI NS!

• Remove the battery while cleaning the unit.

• Remove the battery before storing the unit for

a long period of time.

• Be sure to install the battery with the correct polarity

as indicated in the battery compartment.

• Properly dispose of the batteries. Exposure to high

temperatures can cause the batteries to explode.

Do not dispose in fire. Place tape over the terminals

to prevent direct contact with other objects. Some

countries have regulations concerning battery disposal.

Please follow all applicable regulations.

DCS200-300 MANUAL 071609 FINAL:Manual 7/16/09 1:25 PM Page 6

C NNECTING THE DISPLAY UNIT T THE CAMERA

HEAD AND PR BE:

The display unit must be connected to the cameral head and

probe. To connect the probe to the display unit, make sure the

keyed ends are properly aligned (See Fig. 6). Once they are

aligned, tighten the nut.

ACCESS RIES INSTALLATI N:

The three accessories include mirror tip, hook tip and

magnetic tip (See Fig. 2). All are attached to the camera

head the same way. old the camera head as shown in Fig. 7,

slip the semicircle end of the accessory over the flats of the

camera head and then rotate the accessory 90° to fix

as shown in Fig. 8.

DCS200-300 MANUAL 071609 FINAL:Manual 7/16/09 1:25 PM Page 7

PERATI N INSTRUCTI NS

BASIC PERATI N:

To turn the unit on, hold

the LCD display unit

facing you (See Fig. 9).

Roll the switch towards

you to turn the power

on. The switch then acts

as a dimmer for the twin

LED’s (See Fig.10), which

is the power supply for

the camera.

This product is designed for hard-to-reach distance inspection.

Typical applications include VAC/R inspections, car inspec-

tions, circuitry, vessel, and aircraft. While in operation, the

product is easy to extend ahead. The accessories can be used

to pick up items such as rings or screws on the floor.

PERATI N PRECAUTI NS!

1. Please read all the safety instructions carefully.

2. The probe is flexible to help you operate in hard-to-reach

areas. Please don’t insert or bend by force. Please do not

over bend any part of the probe. Normally, the bending

radius should not be less than 2" (50mm) to prevent from

causing permanent damage to the probe.

3. Don’t use the probe or camera head to modify

surroundings, clear pathways or clogged areas.

4. The hand-held display unit is not waterproof. The camera

head and its cover is waterproof, but not acid-proof or

fireproof. Do not touch these materials or they will ruin

the camera head’s protective plastic. Avoid submersing

DCS200-300 MANUAL 071609 FINAL:Manual 7/16/09 1:25 PM Page 8

the camera head into corrosive, oily places or high

temperature objects.

5. Don’t place the cameral head or probe into anything or

anywhere that may contain a live electrical charge.

Please check following methods to avoid injury.

For walls: For inspecting the inside walls, be sure to shut off

the circuit breaker to the whole house before

using the tool.

For pipes: If you suspect a metal pipe could contain an

electrical charge, have a qualified electrician

to check the pipe before using. A ground circuit,

in some cases, can be returned to the cast

aluminum pipes and cause them to be charged.

For automobiles: Be sure the automobile is not running during

inspection. Metal and liquid under the hood may

be hot. Don’t get oil or gas on the camera head.

• Please do not operate this product unless the manual

has been read thoroughly and proper training has been

completed.

• Do not immerse the handheld display unit in water which

will result in electric shock and damages.

• The camera head is water-proof, but the handheld display

is not water-proof.

• Do not use the product if condensation forms inside

the camera head.

• If the tool does not work well after turning it on. Please

take the batteries out and do not use. Please have the

unit checked by a qualified technician.

• Store idle products out of reach of children and other

untrained personnel. The product is dangerous in the

hands of untrained users.

• Maintain the inspection product with care. If the product

DCS200-300 MANUAL 071609 FINAL:Manual 7/16/09 1:25 PM Page 9

is dropped, check for the breakage which may affect it’s

operation. If it is damaged, have the product serviced

before using. Many accidents are caused by poorly

maintained products.

• Use only accessories that are recommended by the

manufacturer for your product. Accessories are suitable

for the product, but may become hazardous when used

on another product.

• Dry your hands before turning the product ON or OFF

and before replacing battery.

• Protect against excessive heat. The product should be

kept away from heat sources, such as radiators, heat

registers, stoves or other products (including amplifiers)

that produce heat. Do not use the product near moving

machinery or areas where the temperature exceeds

113°F (45ºC).

• Store the product in ventilated and dry places.

MAINTENANCE INSTRUCTI NS

• Product service must be performed only by qualified

repair personnel. Services performed by untrained

repair personnel could result in injury.

• When servicing the product, only use identical replacement

parts. Use of unauthorized parts or failure to follow

maintenance instructions may create a risk of electrical

shock or injury.

• Don’t attempt to take any pieces of this product apart

unless directed by this manual.

• Provide proper cleaning. Don’t use acetones to clean the

product. Use soap or soft cloth to clean. Gently clean the

LCD with a dry cloth. Remove the battery before cleaning.

DCS200-300 MANUAL 071609 FINAL:Manual 7/16/09 1:25 PM Page 10

Andere Handbücher für DCS200

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere General Analytisches Instrument Handbücher

General

General CL10 Bedienungsanleitung

General

General SeaScope 600 Bedienungsanleitung

General

General GLDM25 Bedienungsanleitung

General

General DPS16 Bedienungsanleitung

General

General DCS2000 Bedienungsanleitung

General

General DCS100 Bedienungsanleitung

General

General TS03 Bedienungsanleitung

General

General DCS1800 Bedienungsanleitung

General

General DCS660A Bedienungsanleitung

General

General iBORESCOPE4 Bedienungsanleitung

General

General P16PIP Bedienungsanleitung

General

General DCS200 Bedienungsanleitung

General

General DCS1600ART Bedienungsanleitung

General

General Seeker 400 Series Bedienungsanleitung

General

General DCS600A Bedienungsanleitung

General

General LDM1 Bedienungsanleitung

General

General The Seeker DCS050 Bedienungsanleitung

General

General DCS500 Bedienungsanleitung

Beliebte Analytisches Instrument Handbücher anderer Marken

Cocraft

Cocraft NLT04 Bedienungsanleitung

M&C

M&C GENTWO PMA1000 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON optoncdt 1700 Bedienungsanleitung

CONDTROL

CONDTROL XP4 PRO Bedienungsanleitung

Extech Instruments

Extech Instruments BR200 Bedienungsanleitung

Dewetron

Dewetron DEWE-30-16 Produkthandbuch

EXTOL PREMIUM

EXTOL PREMIUM 8820043 Montage- und Bedienungsanleitung

RIDGID

RIDGID SeeSnake Compact Bedienungsanleitung

Teledyne

Teledyne 3000PA Bedienungsanleitung

YDLIDAR

YDLIDAR TIA Bedienungsanleitung

Olympus

Olympus IPLEX FX Series Bedienungsanleitung

Bosch

Bosch GLM 50 C Professional Bedienungsanleitung

Reflecta

Reflecta DigiEndoscope Bedienungsanleitung

Chinavision

Chinavision CVACZ-G696 Montageanleitung

Fuji Electric

Fuji Electric ZKMA Bedienungsanleitung

Teledyne

Teledyne 3300TA Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT IC-100HD Bedienungsanleitung

RIDGID

RIDGID micro CA-25 Bedienungsanleitung