General FD08 Bedienungsanleitung
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 – 6
Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
W at’s in t e Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 – 9
Setup Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 – 10
Install Batteries . . . . . . . . . . . . . . . . . . . . . . . . 9 - 10
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . 10 – 14
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 15
Operating & Maintenance Tips . . . . . . . . . . . . . . . . . 15- 18
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Return for Repair Policy . . . . . . . . . . . . . . . . . . . . . . . . . 19
INT ODUCTION
Thank you for purchasing eneral Tools & Instruments’ FD08
Formaldehyde Meter. Please read this user’s manual carefully
and thoroughly before using the product.
The FD08 is an easy-to-use handheld instrument for
measuring levels of gaseous formaldehyde (HCHO) as part of
a workplace indoor air quality (IAQ) maintenance program or
to spot-check a residential environment.
Exposure to formaldehyde has a significant impact on human
health. In 2011, the U.S. National Toxicology Program
described formaldehyde as “known to be a human
carcinogen.” It can also be toxic and allergenic.
2
Formaldehyde—which is colorless and has a characteristic
pungent, irritating odor—is ubiquitous. It is produced by the
oxidation or combustion of methane and other carbon
compounds and is therefore present in forest fires,
automobile exhaust, and tobacco smoke. When produced in
the atmosphere by the action of sunlight and oxygen on
atmospheric methane and other hydrocarbons, formaldehyde
becomes part of smog.
The primary exposure concern is for the workers in the
industries producing or using formaldehyde. Including indirect
employment, over 4 million people work in the formaldehyde
industry across approximately 11,900 plants in the U.S. and
Canada alone. For example, the textile industry uses
formaldehyde-based resins as finishers to make fabrics
crease-resistant. Formaldehyde-based materials are key to
the manufacture of automobile transmissions, electrical
systems, engine blocks, door panels, axles and brake shoes.
Occupational exposure to formaldehyde by inhalation is
mainly from three types of sources: thermal or chemical
decomposition of formaldehyde-based resins, formaldehyde
emission from aqueous solutions (for example, embalming
fluids), and combustion of a variety of organic compounds.
Because formaldehyde resins are used in many construction
materials it is one of the more common indoor air pollutants.
At concentrations above 0.1 ppm in air, formaldehyde can
irritate the eyes and mucous membranes, resulting in watery
eyes. Formaldehyde inhaled at this concentration may cause
headaches, a burning sensation in the throat and difficulty
breathing, and can trigger or aggravate asthma symptoms.
When treated with phenol, urea, or melamine, formaldehyde
produces polymer resins that are commonly used as
permanent adhesives in plywood and carpeting, in nail
3
hardeners and nail polish, and as the wet-strength material
added to sanitary paper products such as facial tissue, table
napkins and roll towels. Production of formaldehyde resins
accounts for more than half of formaldehyde consumption.
Other formaldehyde derivatives include methylene diphenyl
diisocyanate, an important ingredient of polyurethane paints
and foams. Formaldehyde has been found as a contaminant
in several bath products, at levels from 54 to 610 ppm; it is
thought to arise from the breakdown of preservatives in the
products. Since 2006, formaldehyde (methylene glycol) is also
used in hair smoothing treatments in order to straighten
wavy/curly hair and make hair less prone to frizz in humid
weather. OSHA Oregon has reported these treatments as
unsafe for human health.
An aqueous solution of formaldehyde can be useful as a
disinfectant as it kills most bacteria and fungi, including their
spores. Formaldehyde solutions are applied topically in
medicine to dry the skin, such as in the treatment of warts.
Urinary tract infections are often treated with a derivative of
formaldehyde (methenamine), a method often chosen
because it prevents overuse of antibiotics and the resultant
development of bacterial resistance to them. Some topical
creams, cosmetics and personal hygiene products contain
derivatives of formaldehyde as the active ingredients that
prevent the growth of potentially harmful bacteria.
A 1988 Canadian study of houses with urea-formaldehyde
foam insulation found that formaldehyde levels as low as
0.046 ppm were positively correlated with eye and nasal
irritation. A recent review of studies has shown a strong
association between exposure to formaldehyde and the
development of childhood asthma. Chronic exposure at higher
4
levels, starting at around 1.9 ppm, has been shown to result in
significant damage to pulmonary function, resulting in reduced
maximum mid-expiratory flow and forced vital capacity. There
is also research that supports the theory that formaldehyde
exposure contributes to reproductive problems in women.
RESIDENTIAL EXPOSURE
In the residential environment, formaldehyde exposure comes
from a number of different routes; formaldehyde can off-gas
from wood products, such as plywood or particle board, but it
is produced by paints, varnishes, floor finishes, and cigarette
smoke as well.
The U.S. Environmental Protection Agency (EPA) allows no
more than 0.016 ppm formaldehyde in the air in new
buildings constructed for that agency. An EPA study found
that a new home measured 0.076 ppm when brand new and
0.045 ppm after 30 days. The agency recommends the use of
“exterior-grade” pressed-wood products with phenol instead
of urea resin to limit formaldehyde exposure, since pressed-
wood products containing formaldehyde resins are often a
significant source of formaldehyde in homes.
People who suffer allergic reactions to formaldehyde tend to
display lesions on the skin in the areas that have had direct
contact with the substance, such as the neck or thighs (often
due to formaldehyde released from permanent-press
clothing) or dermatitis on the face (typically from cosmetics).
Formaldehyde has been banned in cosmetics in both Sweden
and Japan.
The eyes are most sensitive to formaldehyde exposure: The
lowest level at which many people can begin to smell
formaldehyde is about 0.05 ppm and the highest level is
1 ppm. The maximum concentration value at the workplace is
5
0.3 ppm. In controlled chamber studies, individuals begin to
sense eye irritation at about 0.5 ppm; 5 to 20% report eye
irritation at 0.5 to 1 ppm; and greater certainty for sensory
irritation occurred at 1 ppm and above. While some agencies
have used a level as low as 0.1 ppm as a threshold for
irritation, the expert panel found that a level of 0.3 ppm would
protect against nearly all irritation. In fact, the expert panel
found that a level of 1.0 ppm would avoid eye irritation—the
most sensitive endpoint—in 75 to 95% of all people exposed.
Formaldehyde emits from a variety of construction materials,
furnishings, and consumer products. The three products that
emit the highest concentrations are medium-density
fiberboard, hardwood plywood, and particle board.
Environmental factors such as temperature and relative
humidity can elevate levels because formaldehyde has a high
vapor pressure. Formaldehyde levels from building materials
are the highest when a building first opens because materials
have had less time to off-gas. Formaldehyde levels decrease
over time as the sources suppress.
A Guide to Formaldehyde Exposure Levels
0.03 ppm Average outdoor level
0.10 ppm Recommend upper short-term exposure
limit (STEL) limit for residences by ASHRAE,
ANSI, EPA, and NIOSH
0.40 ppm Recommended upper STEL for
manufactured homes
0.50 ppm OSHA’s workplace limit
6
7
0.75 ppm OSHA’s 15-minute time-weighted average
(TWA) limit
0.80 ppm Level at which most people first detect odor
2.00 ppm OSHA’s STEL limit
KEY FEATU ES
• Electrochemical sensor measures real-time formaldehyde
gas concentration from 0 to 5 ppm with ±5% accuracy and
0.01 ppm resolution
• Also tracks, calculates and displays three cumulative
formaldehyde gas metrics: 8-hour TWA (time-weighted
average), 1-hour average, and 15-minute STEL (short-term
exposure limit)
• One-button calibration to 0 ppm in fresh air
• User-adjustable high concentration audible alarm threshold
• Also measures relative humidity (RH) and temperature in
°F or °C
• Manually offsetable long-term drift of temperature and RH
accuracy
• Min/Max memory and data hold
• Large backlit dual-readout LCD
• 15-minute Auto Power Off (can be disabled)
• Low battery indication
• Tripod mount
• Powered by (4) “AAA” batteries (not included) or included
110VAC adaptor
• CE and RoHS approved
• 2 year limited warranty
8
Fig. 1. The controls,
indicators and physical
structures of the FD08
1
2
6
5
4
3
WHAT’S IN THE PACKAGE
The FD08, a 110VAC adaptor and this user’s manual come in
a soft pouch inside a white box.
P ODUCT OVE VIEW
Fig. 1 shows all controls, indicators
and physical structures of the
FD08. Fig. 2 shows all possible
indications on the LCD. Familiarize
yourself with the locations and
functions of the control buttons
and the meanings of the display
icons before moving on to the
Setup Instructions and Operating
Instructions.
1. Formaldehyde gas sensor inside
vented ball housing
2. Dual-readout LCD
3. Control buttons
HOLD. Freezes both readouts.
Also used to increment
individual digits of high
concentration alarm.
MODE. Pressed and held, calibrates meter to 0 ppm in
fresh air. Pressed briefly in high alarm adjustment mode,
shifts one digit to left.
PW . Pressed briefly with meter off, powers meter on.
Pressed briefly with meter on, arms/disarms high
concentration alarm. Pressed and held with meter on,
powers meter off.
MAX/MIN. Selects value shown on upper readout. Options
are: 1) highest or lowest (Max or Min) level detected since
meter was powered on; 2) 8-hour TWA (time-weighted
average; 3) 15-minute STEL (short-term exposure limit);
4) 1-hour average. Pressed briefly in high alarm
adjustment mode, shifts one digit to right.
SET. Pressed and held, enters/exits high alarm adjustment
mode.
UNIT. Selects °F or °C unit for ambient temperature
reading.
BKLT. Pressed briefly, turns backlight on and off. Also used
to decrement individual digits of high concentration alarm.
4. Battery compartment (on back)
5. Threaded tripod mounting screw hole (on bottom)
6. Jack for AC adaptor (on side)
Fig. 2. All possible display
indications
SETUP INST UCTIONS
INSTALL BATTERIES
The FD08’s battery compartment (Fig. 1, Callout 4) is located
on the lower back of the meter.
9
Obtain four “AAA” batteries. To install them:
1. Open the battery compartment by using your thumb to
slide its cover down and away from the meter.
2. Install the batteries in series in the compartment,
observing the polarity markings inside.
3. Close the battery compartment by sliding the cover back
up on its track until it snaps shut.
OPE ATING INST UCTIONS
To power on the FD08, briefly press the PW button. The
LCD will illuminate and immediately begin scrolling “0s”
across the five positions on the upper readout to indicate that
it is warming up. During the warmup period, the meter will
burn off any dust on the formaldehyde sensor inside the
vented ball. If this is the first use of the meter or if it has not
been powered on for a long time, the warmup period may last
as long as several hours.
Normally, it takes 1 to 15 minutes for the scrolling to stop.
Once it stops, the upper readout will begin counting down
from 9999 through 8888 and 7777 all the way to 0000. When
the upper readout reaches 0000, if no formaldehyde is
present the upper readout will begin reading 0.00 ppm, the
lower readout will begin alternating displays of ambient
temperature and RH, and the term HCHO (the chemical
formula for formaldehyde) will appear below the lower
readout.
10
Inhaltsverzeichnis
Andere General Messgerät Handbücher
General
General WK2017SD Bedienungsanleitung
General
General DAF3009 Bedienungsanleitung
General
General DLM112SD Bedienungsanleitung
General
General DSM402SD Bedienungsanleitung
General
General MM80G Bedienungsanleitung
General
General PTH8708 Bedienungsanleitung
General
General MMD7NP Bedienungsanleitung
General
General LT2234C Bedienungsanleitung
General
General DOM5512SD Bedienungsanleitung
General
General MM700D Bedienungsanleitung
General
General DT4208SD Bedienungsanleitung
General
General Mini Airflow DAF3010 Bedienungsanleitung
General
General XL4 MKII Bedienungsanleitung
General
General DAF4207SD Bedienungsanleitung
General
General MMH800 Bedienungsanleitung
General
General DSM8930 Bedienungsanleitung
General
General LTM1 Bedienungsanleitung
General
General DT4208SD Bedienungsanleitung
General
General MSV100 Bedienungsanleitung
General
General MM1E Bedienungsanleitung
