Geo-FENNEL FL 40-4Liner Bedienungsanleitung

Manual Utilizare

Users‘ manual

Linii laser incrucisate - automate

Fully Automatic Laser Cross Level

FL 40-4Liner

CARACTERISTICI

1) Fereastra emisie laser (4)

2) Tastatura

3) Surub strangere capac baterii

4) Capac compartiment baterii

5) Pornit/Oprit / Blocare compensator

6) 360°-Cerc citire

7) Cap marcare

8) 5/8“-conector

FEATURES

1) Laser emitting window (4)

2) Keypad

3) Locking screw for battery compartment

4) Battery compartment cover

5) ON / OFF switch / compensator lock

6) 360° circle reading

7) Marking head

8) 5/8“-thread

Kitul de livrare

Laser liniar FL 40-4Liner , suport perete/trepied

cu conector de 5/8“-set baterii, tinta magnetica,

ochelari accentuare raza laser, cutie captusita,

manual utilizare

Optional: Receptor FR 55-M sau FR 55

KIT CONSISTS OF

Laser Cross Level FL 40-4Liner , wall/tripod

mount with 5/8“-thread, set of batteries,

magnetic target, laser intensive glasses,

padded carrying case, users‘ manual

Optional: receiver FR 55-M

Functii

Pentru transfer nivel, tavane suspendate,

aliniere pereti si compartimentari, ferestre,

usi, sau alte aliniamente.

FUNCTIONS

For transferring levels, hanging suspended

ceilings, or aligning stud walls, windows,

doors and for alignments

DATE TEHNICE

Domeniu autonivelare ± 3,5°

Precizie ± 3 mm / 10 m

Domeniu lucru

fara receptor 20 m*

cu receptor 30 m

Timp operare 12h**

Sursa de alimentare 3 x 1,5 V AA

Dioda laser 4 x 635 nm

Clasa laser 3R

Greutate 0,9 kg

*depinde de lumina din camera

** depinde de numarul de linii laser pornite

TECHNICAL DATA

Self-levelling range ± 3,5°

Accuracy ± 3 mm / 10 m

Working range

without receiver 20 m*

with receiver 30 m

Operating time 12 h**

Power supply 3 x 1,5 V AA

Visible laser diodes 4 x 635 nm

Laser class 3R

Weight 0,9 kg

*depending on room illumination

**depending on number of laser lines switched on

TASTATURA

A) Mod puls (receptor) Pornit/Oprit

B) Linie laser orizontala pornit/oprit

C) Functionare manuala pornit/oprit

D) Manual LED

E) Pornit/Oprit LED

F) Linii laser verticale pornit/oprit

KEYPAD

A) Reception mode on/off

B) Horizontal laser line on/off

C) Manual-function on/off

D) Manual LED

E) ON / OFF LED

F) Vertikal laser lines on/off

Statul baterii

Cand LED-ul Pornit/Oprit clipeste, bateriile

trebuiesc inlocuite.

BATTERY STATUS

If ON / OFF LED is blinking the batteries

have to be replaced.

Inlocuire baterii CHANGE OF BATTERIES

Loosen locking screw (3) and open battery

compartment (4). Put in 3 x AA Alkaline

batteries. Close battery compartment and

tighten locking screw.

Locking screw

Instrumentul poate fi conectat la un alimentator

optional de 6V CC prin mufa de 2,5 mm.

(nu este inclus in kit de livrare)

The instrument can be connected with DC

6V via 2.5 mm outlet (which is not included

in the kit).

DC -6V

adapter

Slãbiþi þurubul de blocare (3) þi deschideþi

compartimentul bateriilor (4). Puneþi înauntru 3

x AA baterii alcaline. Închideþi compartimentul

pentru baterii þi strângeþi þurubul de blocare.

Functionare manuala

MANUAL-FUNCTION

MANUAL-function is only available in OFF-

mode (as otherwise compensator alarm

would start). Press MANUAL-key (C) and

choose desired laser lines. Now FL 40-4Liner

can be used in slope position.

OPERAREA

Porniti: ON <- -> OFF

Rotiti baza (5) in pozitia „ON“

(Pozitia „OFF“ inchide unitatea)

Comutati liniile laser in acord cu instructiunile

pentru „Tastatura“.

•

OPERATION

Set up the tripod/wall mount of the unit to

a) builder‘s tripod or floor-to-ceiling pillar

(5/8“ thread)

b) to a wall: there are three screw eyes on

the mount through which unit can be fixed

c) Center unit by means of marking head if

necessary.

Switch on: ON <- -> OFF

Turn the base (5) in position „ON“

(position „OFF“ = shut off the unit).

Put the instrument into the tripod/wall

mount. A visual alarm (blinking lines) indi-

cates the instrument was set up outside of

compensator range of ± 3,5°. Set up in-

strument on a more even surface.

Switch on laser lines according to instruc-

tions shown under point „Keypad“.

•

Asezati suportul trepied / perete fata de unitate

a) trepied constructii sau pilon podea-la-plafon

(5 / 8 "filet)

b) la un perete: sunt trei ochiuri þuruburi pe

suport prin care unitatea poate fi stabilitã

c) unitate, prin intermediul Centrului fata de

cap de marcare în cazul în care este necesar.

- Puneþi instrumentul în suportul trepied /

perete. O alarmãvizualã(linii intermitente)

indicãfaptul ca instrumentul a fost înfiinþat în

afara domeniului compensatorului fata de ± 3,5

°. Asezati instrumentul pe o suprafaþãmai

dreapta.

MANUAL-funcþie este disponibilãdoar în modul

OFF (ca altfel alarma compensatorului ar

începe). Apãsaþi tasta MANUAL-(C) þi alege linii

de laser dorite. Acum, FL 40-4Liner poate fi

utilizat în poziþie pantã.

UTILIZAREA RECEPTORULUI (OPTIONAL)

USE WITH RECEIVER (OPTIONAL)

To prolong the working range or at unfavou-

rable light conditions FL 40-4Liner can be

used with the optional receiver FR 55-M

(not included in this kit).

Press button „P“ (operating lamp besides

the button is illuminated) to change to recei-

ver mode. Receiver FR 55-M can now de-

tect the signal of FL 40-4Liner (the visibility

of the laser lines is weaker in this mode).

The working range can be extended up to

60 meters by use of the receiver. More de-

tailed information you will find in users‘

manual of FR 55-M (ref. no. 500520).

COMUTARE LINII LASER

SWITCHABLE LASER LINES

H-LINIE

H-LINE

V1-LINIE

V1-LINE V2-LINIE

V2-LINE

TOATE LINIILE

ALL LINES

Pentru a prelungi intervalul de lucru sau in

condiþii de luminãnefavorabile FL 40-4Liner

poate fi utilizat cu receptorul opþional FR 55-M

sau FR 55 (nu sunt incluse în acest kit).

Apasati butonul "P" (lângãlampãde operare,

butonul este aprins) pentru a schimba la

receptor Mod. Receptor FR 55-M, FR 55,

poate detecta acum semnalul domeniului FL

40-4Liner (vizibilitatea liniilor laser este mai

slabãîn acest mod).

Domeniul de lucru poate fi extins pânãla 60

de metri de utilizand receptorul.

DEMONSTRATII APLICATII APPLICATION DEMONSTRATION

VERIFICARE PRECIZIE

ACCURACY CHECK

Set up instrument in the middle of two walls

which are about 5 m apart. Press buttons

H and V1. Mark a visible laser cross on one

wall. Turn unit to opposite wall and mark a

laser cross.

Repeat measurements with distance of about

0.6 m to one wall and about 4.4 m to second

wall. Deviation between two measurements

taken from the centre and two measurements

taken at 0.6 m and 4.4 m must not exceed

3 mm.

Testing accuracy of horizontal line (end to

end)

Set up instrument about 5 m from a wall.

Press buttons H and V1. Mark laser cross on

the wall. Turn instrument until the laser cross

has moved about 2.5 m to the left side and

check if horizontal line is within ± 2 mm of

laser cross marked on wall. Repeat measure-

ment by turning instrument to the right side

Testing accuracy of vertical line (end to end)

Set up instrument about 5 m from a wall. Fix

a plumb line of 2.5 m length to the wall,

using a plumb bob. Press button V1 and bring

laser line into coincidence with the plumb

line. Deviation between laser line and plum-

met cord from top to bottom must not ex-

ceed ± 1.5 mm.

Asezati instrumentul în mijlocul dintre douãziduri

care sunt la aproximativ 5 m distanta. Apãsaþi

butoanele H þi V1. Marcati crucea laser vizibila pe

unul dintre perete. Rotiþi unitatea la peretele opus þi

marcheazãlaser crucea.

Se repetãmãsurãtorile la distanþãde aproximativ 0,6

m de un perete þi de aproximativ 4,4 m de al doilea

perete. Deviaþia dintre doua masuratori luate de la

centru þi douãmãsurãtori fãcute la 0,6 m þi 4,4 m nu

trebuie sãdepãþeascã3 mm.

Testarea preciziei liniei orizontale (de la capat la

capat)

Asezati instrumentul la circa 5 m de un perete.

Apãsaþi butoanele H þi V1. Marcati crucea laser

peperete. Rotiþi instrumentul pânãcând crucea laser

s-a mutat aproximativ 2,5 m pe partea stângãþi

verifica dacãlinia orizontalãeste de ± 2 mm dintre

crucea laser marcatãpe perete. Repetaþi mãsurarea

prin rotirea instrumentului catre partea dreapta

Testarea preciziei linie verticalã(cap la cap)

Asezati instrumentul la circa 5 m de un perete. Fixati

o verticala la 2,5 m pe perete, folosind un fir cu

plumb. Apãsaþi butonul V1 þi aduceti linia laser în

coincidenþãcu linia fir cu plumb. Deviaþia dintre linia

laser þi centrul cablul de sus în jos nu trebuie sã

depãþeascã± 1,5 mm.

CARE AND CLEANING

Please handle measuring instruments with

care.

Clean with soft cloth only after any use. If

necessary damp cloth with some water.

If instrument is wet clean and dry it carefully.

Pack it up only if it is perfectly dry.

Transport in original container / case only.

CURATARE SI INTRETINERE

NOTA:

Pe timpul transportului, baza nr.5 trebuie setata

pe pozitia inchis „OFF“

Nerespectarea poate duce la daune ale

compensatorului.

NOTE:

During transport base no. 5 must be set to

position „OFF“. Disregard may lead to

damage of compensator.

Utilizarea preconizatãa instrumentul

INTENDED USE OF INSRUMENT

The instrument emits a visible laser beam in

order to carry out the following measuring

tasks (depending on instrument):

Setting up heights, horizontal and vertical

planes, right angles and plumbing points.

SPECIFIC REASONS FOR ERRONEOUS

MEASURING RESULTS

Measurements through glass or plastic win-

dows;

dirty laser emitting windows;

after instrument has been dropped or hit.

Please check accuracy.

Large fluctuation of temperature: If instru-

ment will be used in cold areas after it has

been stored in warm areas (or the other way

round) please wait some minutes before car-

rying out measurements.

•

-Vãrugãm sãmanuiti instrumente de masurare cu

grijã.

-Curãtati cu o cârpãmoale dupãorice utilizare.

Dacãeste necesar , folositi o cârpãumedãcu

puþinãapã.

-În cazul în care instrumentul este umed curatati-l þi

uscati-l cu atenþie.

-Impachetati-l numai dacãacesta este perfect

uscat. Transportul, în ambalajul original / numai el.

-Instrumentul emite un laser fascicul vizibil, în

vederea efectuãrii urmãtoarele sarcini de

masurare (în funcþie de instrumentul): Transfer

de inaltimi, orizontale þi planuri verticale, unghi

drept, transfer puncte.

Motivele specifice pentru rezultatele

masurate eronat

- Mãsurãtorile prin sticlãsau Ferestre din

plastic;

-Ferestre care emit laserul murdare.

-Dupãce instrumentul a fost scãpat pe jos sau

lovit. Vãrugãm sãverificaþi acurateþea.

-Fluctuaþie mare de temperaturã: în cazul în

care instrumentul va fi utilizat în zone reci dupã

ce a fost depozitat în zonele calde (sau invers),

vãrog, aþteptaþi câteva minute înainte de

efectuarea mãsurãtorilor.

ACCEPTABILITATE ELECTROMAGNETICA

ELECTROMAGNETIC ACCEPTABILITY (EMC)

It cannot be completely excluded that this

instrument will disturb other instruments

(e.g. navigation systems);

will be disturbed by other instruments (e.g.

intensive electromagnetic radiation nearby

industrial facilities or radio transmitters).

•

Conformitate CE

Instrumentul are marca CE in acord cu

normele EN 61326:1997, EN 55022,

EN 61000-4-2/-3.

CE-CONFORMITY

Instrument has CE-mark according to

EN 61326:1997, EN 55022,

EN 61000-4-2/-3.

CLASIFICARE LASER

LASER CLASSIFICATION

The instrument is a laser class 3R laser pro-

duct according to DIN IEC 60825-1:2003-10.

The measuring tool should be operated only

by persons who are familiar with the handling

of laser devices.

According to EN 60825-1, this includes,

among other things, the knowledge about the

biological effects of the laser to the eyes and

the skin as well as the correct usage of laser

protection devices in order to avoid dangers

Clasa laser 3R etichete de avertizare pe

instrumentul cu laser

Laser class 3R warning labels on the laser

instrument.

-Nu poate fi complet exclus cãacest

instrument va deranja alte instrumente (de

exemplu, sisteme de navigaþie)

-va fi deranjat de cãtre alte instrumente (de

exemplu, intensiv electromagnetice radiaþii în

apropiere instalaþii industriale sau emiþãtoare

radio).

Instrumentul este un laser de clasa 3R produs

cu laser în conformitate cu DIN IEC 60825-

1:2003-10.Instrumentele de masurare ar trebui

sãfie exploatate numai de cãtre persoane care

sunt familiarizate cu manipularea de dispozitive

cu laser.

Conform EN 60825-1, acest lucru include,

printre altele, cunoþtinþele despre efectele

biologice ale laserului pentru ochi sipiele,

precum þi folosirea corectãa dispozitive de

protecþia laserului pentru a evita pericolele

Andere Handbücher für FL 40-4Liner

Inhaltsverzeichnis

Andere geo-FENNEL Laser-Nivelliergerät Handbücher

geo-FENNEL

geo-FENNEL FL 30 Bedienungsanleitung

geo-FENNEL

geo-FENNEL Geo5X-L360 HP Bedienungsanleitung

geo-FENNEL

geo-FENNEL 360 LinerPoint HP Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 40-4Liner Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 250VA-N Bedienungsanleitung

geo-FENNEL

geo-FENNEL Torpedo Bedienungsanleitung

geo-FENNEL

geo-FENNEL MULTI-LINER FL 55 Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 500HV-G Bedienungsanleitung

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Bedienungsanleitung

geo-FENNEL

geo-FENNEL MULTI-LINER FL 55 PLUS HP Bedienungsanleitung

geo-FENNEL

geo-FENNEL Selection Pro FL 80 Bedienungsanleitung

geo-FENNEL

geo-FENNEL Ecoline EL 601 Bedienungsanleitung

geo-FENNEL

geo-FENNEL MULTI-LINER FLG-55 Green Bedienungsanleitung

geo-FENNEL

geo-FENNEL FR 66-MM Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 30 Bedienungsanleitung

geo-FENNEL

geo-FENNEL Selection PRO Geo6X SP Bedienungsanleitung

geo-FENNEL

geo-FENNEL 530000 Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 100HAJunior Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 245HV + Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 100HA Junior Bedienungsanleitung

geo-FENNEL

geo-FENNEL FET 220K-L Bedienungsanleitung

geo-FENNEL

geo-FENNEL DuoCrossPointer3 HP Bedienungsanleitung

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 10-CROSS Bedienungsanleitung

Beliebte Laser-Nivelliergerät Handbücher anderer Marken

Nedo

Nedo ET-5 Bedienungsanleitung

LaserLiner

LaserLiner X2-Laser Bedienungsanleitung

Spectra

Spectra LL300N Bedienungsanleitung

Nedo

Nedo Crossliner 4 Bedienungsanleitung

Lasertec

Lasertec FX360G Bedienungsanleitung

Flex

Flex ALC 8 Bedienungsanleitung

Black & Decker

Black & Decker LZR5 Bedienungsanleitung

Johnson

Johnson 40-6692 Bedienungsanleitung

Cocraft

Cocraft HL 20-SG Bedienungsanleitung

Zircon

Zircon iLine Bedienungsanleitung

HWH

HWH 310 SERIES Bedienungsanleitung

Leica

Leica iCON robot 60 Bedienungsanleitung

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Bedienungsanleitung

LaserLiner

LaserLiner ActiveFinder XP Bedienungsanleitung

DeWalt

DeWalt DW082 Bedienungsanleitung

imex

imex EL20 Bedienungsanleitung

Fixturlaser

Fixturlaser NXA D I-0912 Bedienungsanleitung

Wacker Neuson

Wacker Neuson PAL450 Bedienungsanleitung