Geo-FENNEL Maxi-Liner FL 60 Bedienungsanleitung

Manual Utilizare

Users‘ manual

Linii laser incrucisate - automate

Fully Automatic Laser Cross Level

Maxi-Liner FL 60

CARACTERISTICI

1) Ferestre emisie laser (6 bucati)

2) Compartiment baterii

3) Surub blocare

4) Conector pentru incarcator

5) Trepied-pode cu conector 5/8“-pentru trepied

6) Picior cu surub - ajustabil

7) Bula circulara

8) Surub tangent

9) Tastatura

10) Maner

11) Cerc rotund 360°

FEATURES

1) Laser emitting window (6 pieces)

2) Battery compartment

3) Lock screw

4) Socket for charger

5) Floor tripod with 5/8“ thread for use on

a tripod

6) Adjustable foot screw

7) Circular bubble

8) Tangent screw

9) Keypad

10) Handle

11) Rotatable 360° circle

KIT DE LIVRARE

Maxi-Liner FL 60, receptor, acumulator,

incarcator, tinta magnetica, ochelari laser,

cutie robusta, manual utilizare.

KIT CONSISTS OF

Maxi-Liner FL 60, receiver, rechargable

batteries, power supply, magnetic target,

laser glasses, hard case, users‘ manual

Functii si Caracteristici

Maxi-Liner FL 60 este o nivela laser autonivelanta

cu linii. Folosind bulele electronice, este posibila

obtinerea unei precizii de pana la ± 1 mm auf 10 m.

FUNCTIONS AND FEATURES

Maxi-Liner FL 60 is an electronic self-levelling

line laser. By use of electronic vials it is pos-

sible to reach a high accuracy of ± 1 mm at

10 metres.

DATE TEHNICE

Domeniu Autonivelare ± 3°

Precizie ± 1 mm / 10 m

Zona de lucru

fara receptor O 20 m*

cu receptor O 80 m*

Unghi deschidere Hz-linie 2 x 130°

Sursa alimentara NiMH / alternativ

Baterii alcaline

Incarcator ce poate fi folosit si pentru alimentare

directa da

Dioda laser/Clasa laser 635 nm / 2M

Temperatura operare -10°C la + 40°C

*depinde de lumina din camera

Datele tehnice pot fi schimbate fara notificare

TECHNICAL DATA

Self-levelling range ± 3°

Accuracy ± 1 mm / 10 m

Working range

without receiver O 20 m*

with receiver O 80 m*

Fan angle Hz-lines 2 x 130°

Power supply NiMH /

Alkaline batteries

Charger = power supply yes

Laser diode / Laser class 635 nm / 2M

Temperature range -10°C to + 40°C

*depending on surrounding and average light conditions

Subject to technical changes without notice.

1) 4 vertical lines at 90° to each other + 2

ho rizontal lines with 130° fan angle each

= 5 laser crosses

2) Plumb up laser cross and plumb down laser

beam

3) Automatic TILT-function

4) Use with receiver FR 55

5) Automatic shut-off when out of level

6) Adjustable 360° circle and tangent screw

7) Integrated floor tripod

8) 5/8“-thread for connection to builders‘

tripod

Acumulator si Incarcator

Pot fi folositi atat acumulatori standard NiMH

cat si baterii alcaline 8xAA.

NiMH-set

Fl60 vine impreuna cu set de acumulatori

NiMH.

Conectati incarcatorul la conectorul “4”

Lumina rosie permanenta, indica incarcare in

curs.

Lumina verde permanenta indica incarcarea

terminata.

Luminile sunt la laser.

BATTERY AND CHARGER

Both the standard NiMH battery or 8 x AA

Alkaline batteries can be used.

NiMH battery pack

FL 60 comes with NiMH rechargeable battery

pack.

Connect the AC/DC converter with socket

“4”.

Permanent red light (at laser) indicates that

batteries are being charged.

Permanent green light (at laser) indicates that

batteries are fully charged.

1) 4 linii verticale la 90 ° fiecare de cealalta + 2

linii orizontale cu 130 unghi · = 5 cruci laser

2) Fir cu Plumb laser în sus - cruce þi firul cu

plumb în jos laser punct

3)-functiune automatãTILT

4) Utilizarea cu receptor FR 55

5) Oprire automatãatunci când afarãde nivelul

6) reglabil cerc de 360 ° þi þurub tangent

7) integrat trepied podea

8) 5 / 8 "-filet pentru conectarea la trepied

constructii

Timpul de incarcare este de aprox 7 ore.

Timpul de operare pentru baterii incarcate este

de aproximativ 12 ore

Prima incarcare: In cazul unei noi baterii

timpul recomandat de incarcare este de

cca. 12 ore.

Daca indicatorul lampa Power de pe panou

clipeste, bateriile trebuiesc incarcate.

8 x AA baterii alcaline

Charging time is approx. 7 hours.

The working time with fully charged battery

pack is approx. 12 hrs.

First time charging: If a new battery pack

must be charged we recommend a charging

time of 12 hours!

If power indicator lamp at control panel is

blinking the batteries have to be recharged.

8 x AA Alkaline batteries

FL 60 can be used with Alkaline batteries

alternatively.

The working time with new alkaline batteries

is up to 24 hrs (depending on quality of batte-

ries). Unscrew lock screw “3” and remove

NiMH compartment. Take battery compart-

ment for alkaline batteries and put in 8 x AA

Alkaline batteries according to description

inside of the battery compartment (take care

of correct polarity!)

Whilst use of Alkaline batteries the recharging

function is disabled.

TASTATURA

1) Buton pornit/oprit

2) TILT-Functia

3) Pornit/oprit pentru utilizare receptor

4) Buton selectie H1,V1,V2,D

5) Buton selectie H2,V3,V4,D

6) Lampa indicator pentru procedura de calibrare

- nu este descrisa in manual

Doar pentru dealerii autorizati.

KEYPAD

1) ON/OFF button

2) TILT-Function

3) ON/OFF switch for use with receiver FR 55

4) Selection button H1,V1,V2,D

5) Selection button H2,V3,V4,D

6) Indicator lamps calibration procedure - not

mentioned in this manual. For authorized

dealers only.

Timpul de lucru cu baterii alcaline noi este de

pânãla 24 de ore (în funcþie de calitatea

bateriilor). Deþurubaþi þurubul de blocare "3" þi

scoateþi NiMH compartiment. Luaþi

compartimentul bateriilor pentru bateriile

alcaline þi sãpuneti 8 x AA Bateriile alcaline în

conformitate cu descrierea din interiorul

compartimentului pentru baterii (grijãde

polaritatea corecta!) În timp ce utilizaþi bateriile

alcaline Funcþia de reîncãrcare este

dezactivatã.

SWITCHING THE UNIT ON / OFF

Press button “1” to switch the unit on.

Press button “1” again to switch the unit off.

After switching the unit on flashing laser

beams indicate that automatic self-levelling

procedure is working. Self-levelling procedure

may take up to 30 seconds.

When laser lines stop flashing the self-level-

ling procedure is completed.

If not the laser was set up out of self-levelling

range.

In this case please set up instrument on more

even surface.

If power indicator lamp at control panel is

blinking during use of instrument the batteries

have to be recharged/alkaline batteries ex-

changed.

Comutare Unitate Pornit/Oprit

Apasati butonul “1” pentru pornire unitate

Apasati tasta “1” din nou pentru deconectare

unitate.

INSTALAREA LASERULUI

1) Pe trepied: FL 60 are un conector 5/8“-pentru

trepied de constructii

2) Pe podea: asezati trepiedul-podea, direct jos

pe teren.

Daca este necesar, centrati bula circulara

din partea de sus, cu piciorul ajustabil

Nr. 6

Important : Precizia de la 10 m poate± 1 mm

fi atinsa doar cand bula este centrata.

SET UP THE LASER

1) On a tripod: Connect FL 60 with 5/8“-retai-

ning bolt of builders‘ tripod.

2) On the floor: Put FL 60 with floor tripod to

the ground. If necessary centre circular bub-

ble in head of instrument by means of height

adjustable foot screws no. 6.

Important: The minimal accuracy of

± 1 mm/10 m can be reached only if cir-

cular bubble is centered!

Dupãpornirea unitãþii pe intermitent laser

fascicul indicãfaptul cãProcedura de auto-

nivelare lucreaza . Procedura de Auto-nivelare

poate dura pânãla 30 de secunde. Atunci

când liniile laser nu mai clipesc, procedura

este finalizatã. Dacãnu laserul a fost înfiinþat

in afara intervalului auto-nivelare. În acest

caz, vãrugãm sãinstituit instrumentul pe o

suprafaþãmai dreapta.

Dacãlampãindicatoare de putere de la

panoul de control se aprinde intermitent în

timpul utilizãrii instrumentului, bateriile trebui

sãfi reîncãrcate / baterii alcaline schimbate.

•

SELECTARE LINIILOR LASER

Dupa pornirea nivelei FL 60, toate liniile laser

sunt activate. Liniile se pot inchide ( pentru a

salva energie - daca nu sunt necesare )

Apasati tasta pentru selectie Nr. 4 = H1,V1,V2,D

Apasati tasta pentru selectie Nr. 5 = H2,V3,V4,D

SELECTION OF LASER LINES

After switching FL 60 on all laser lines are

activated. The lines can be switched off part-

ly (to save energy if not all are needed):

Press selection button no. 4 = H1,V1,V2,D

Press selection button no. 5 = H2,V3,V4,D

TILT ALARM FUNCTION

FL 60 Maxi Liner is equipped with an automa-

tic TILT-function. If level of a laser level is

disturbed the instrument will readjust itself

(within the self-levelling range). If level is

disturbed at large range (for example if posi-

tion of tripod leg has changed by mistake) a

height offset will be caused.

This will be avoided by the TILT-function.

The instrument will shut off even within the

self-levelling range:

Approx. 30 sec. after FL 60 has been

switched on the TILT-function will be acti-

vated automatically.

The red LED indicates that TILT-func-

tion is activated. If now the level is dis-

turbed the unit will not readjust itself

(the lines are blinking).

To deactivate TILT-Function press TILT-

button again.

TILT-Functia

LED-ul rosu indica atunci cand functia-

TILT este activata. Daca este perturbata,

nivela nu se autoniveleaza, fiind necesara

o pornire noua dupa o verificare prealabila.

(Linia laser clipeste)

Pentru dezactivare Functie TILT, apasati tasta

“TILT” din nou..

FL 60 Liner Maxi este echipat cu un sistem

automat TILT funcþie. Dacãnivelul unei nivele

laser este deranjata, instrumentul se va regla

din nou (în intervalul de auto-nivelare). Dacã

nivelul este deranjat intr-o gamãlargã(de

exemplu, în cazul în care poziþia piciorului de

trepied s-a schimbat din greþealã) o diferenþa

de inãlþimea va fi cauzata.

Acest lucru va fi evitat prin funcþia TILT-.

Instrumentul se va opri chiar þi în cadrul

intervalului de auto-nivelare

Aproximativ 30 sec. dupãce FL 60 a fost

pornit-TILT funcþia va fi activatãîn mod automat

Cerc rotativ de 360°-surub tangent

FL 60 este echipat cu un cerc rotativ de 360°-

(Nr. 11).

Laserul se poate roti cu mana

sau cu atentie, utilizand surubul Nr. 8

ROTATABLE CIRCLE AND TANGENT

SCREW

FL 60 is equipped with a 360° rotatable

circle (no. 11).

The laser can be rotated by hand

or carefully by use of the tangent screw no. 8

Verificarea preciziei instrumentului

Perete

INSTRUMENT ACCURACY SELF-CHECK

After having used the laser for a certain pe-

riod of time, before starting a large project or

after the unit dropped, the user needs to self-

check the instruments accuracy with the

following method:

Wall

1) Set up the instrument on a tripod 20 m far

away from an indoor wall, and let X-axis

(please note mark on top of the laser) face

against the wall;

2) Press power switch and wait until self-level-

ling procedure is completed.

3) Mark “A” on the laser line on the wall.

Dupãcare au folosit laserul pentru o anumitã

perioadãde timp înainte de a începe un proiect

amplu sau dupãce unitatea a cazut, utilizatorul

trebuie sãverifice automat precizia

instrumentelor cu Metoda de urmãtorul text:

1) Setati instrumentul pe un trepied la 20 m

departe de un zid interior apoi permiteþi-X-axa

(vãrugãm sãmarcaþi nota pe partea de sus a

laserului) in faþãde perete;

2) Apãsaþi comutatorul de alimentare þi

aþteptaþi pânãcând auto-nivelarea -

procedura este finalizatã.

3) Mark "A" linia laser pe perete.

4) Rotate the instrument by 90° and mark “B”,

“C”, “D” respectively on the wall.

5) Measure the distance “h” between the high-

est and the lowest point among “A”, “B”,

“C”, “D”.

6I)f“h”≤2mmtheaccuracyisgood.If“h”

is more than 2 mm please contact your

local dealer.

4) Rotiþi instrumentul cu 90 ° þi marcati "B" "C"

"D", respectiv pe perete.

5) Mãsuraþi distanþa "h" între cel mai înalt þi cel

mai de jos punct printre "A" "B" "C" "D".

6) În cazul în care "h" ≤2 mm, precizia este

buna. Dacã"h" este mai mult de 2 mm, vã

rugãm sãcontactaþi distribuitorul local.

RECEIVER FR 55 WITH CLAMP

To prolong the working range FL 60 can be

used with FR 55 receiver.

Press button

at FL 60. Receiver FR 55 now can detect the

signal of FL 60 (visibility of the laser beams is

a bit weaker in this mode).

UTILIZAREA FR 55 CU CLEMA

Pentru marirea zonei de lucru a nivelei laser

FL 60 , utilizati receptorul FR 55

Apasati tasta “pulse”

de la FL 60. Receptorul poate detecta acum

semnalul laser de la nivela ( vizibilitatea razei

laser scazand in intensitate in acest mod )

1) Bula 8) Difuzor

2) Fereastra receptie 9) LED / sageata

3) Ton pornit/oprit 10) LED / Punct

4) Comutator on/off 11) LED / sageata

5) Bula 12) „0“-Linie

6) Display 13) 1/4“-conector pentru

7) „0“Linie clema

14) Compartiment baterie

1) Vial 8) Loudspeaker

2) Receiving window 9) LED / arrow

3) Sound on/off 10) LED / point

4) On/Off switch 11) LED / arrow

5) Vial 12) Zero indication line

6) Display 13) 1/4“-mounting hole

7) Zero indication line 14) Battery compartment

INSTALLATION OF BATTERIES

Open the battery compartment cover “14”.

Put in 1 x 9 V battery according to installati-

onsymbol (take care of correct polarity!).

Close cover.

In order to save battery power the receiver

will automatically turn off if it has not recei-

ved laser scanning signal for 10 minutes.

INSTALAREA BATERIEI

Deschideþi capacul compartimentul bateriilor

"14". Puneþi 1 x 9 V baterie în conformitate cu

simbolul de instalare (aveti grijãde polaritatea

corecta!). Închideþi capacul. În scopul de a

economisi energia bateriei, receptorul se va

opri automat în cazul în care nu a primit

scanare semnal laser timp de 10 minute.

Fixare clema pe rigla de nivel

Simboluri pe Display

1) Indicator baterie

2) Indicator baterie descarcata

3) Indicator detectie fina/grosiera

4) Indicator sunet

5) Detectie pozitie

Clamp for levelling staff

If required mount FR 55 to clamp

as per picture on page 10.

Symbols at display

1) Power indicator

2) Low battery indicator

3) Fine/coarse detection indicator

4) Sound indicator

5) Detected position indicator

LED

Display

Detectie semnal laser

IMPORTANT

Detection of laser signal

A Move the receiver down

Acoustic signal:

ultra short frequent beep

B Move the receiver up

Acoustic signal:

short frequent beep

C On level

Acoustic signal:

continuous beep

IMPORTANT

Move receiver FR 55 up and

down carefully to detect

the laser beam.

Montarea se face cu ajutorul falcilor

mobile ce permit o prindere

universala.

A Mutaþi receptorul jos

Semnal acustic: foarte scurt

frecvent bip

B Mutaþi receptorul în sus -

Semnal acustic: scurt frecvent

bip La nivelul

C Semnal acustic: continuu

bip

Miscati receptorul FR 55 in

sus si jos cu atentie, pentru a

detecta raza laser.

Inhaltsverzeichnis

Andere geo-FENNEL Laser-Nivelliergerät Handbücher

geo-FENNEL

geo-FENNEL Ecoline EL 607 Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 10-CROSS Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 250VA-N Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 245HV + Bedienungsanleitung

geo-FENNEL

geo-FENNEL DuoCrossPointer3 HP Bedienungsanleitung

geo-FENNEL

geo-FENNEL FR 45 Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 100HAJunior Bedienungsanleitung

geo-FENNEL

geo-FENNEL MULTI-LINER FL 50 Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 100 HA Bedienungsanleitung

geo-FENNEL

geo-FENNEL Selection PRO Geo6X SP Bedienungsanleitung

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Bedienungsanleitung

geo-FENNEL

geo-FENNEL FKL 50 Bedienungsanleitung

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Bedienungsanleitung

geo-FENNEL

geo-FENNEL MULTI-LINER FL 55 PLUS HP Bedienungsanleitung

geo-FENNEL

geo-FENNEL Ecoline EL 503 Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 30 Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 30 Bedienungsanleitung

geo-FENNEL

geo-FENNEL Geo5X-L360 HP Bedienungsanleitung

geo-FENNEL

geo-FENNEL FLG 64-GREEN HP Bedienungsanleitung

geo-FENNEL

geo-FENNEL FLP 150 GREEN Bedienungsanleitung

geo-FENNEL

geo-FENNEL FL 250VA-N Bedienungsanleitung

geo-FENNEL

geo-FENNEL CrossPointer5 SP Bedienungsanleitung

geo-FENNEL

geo-FENNEL MULTI-LINER FLG-55 Green Bedienungsanleitung

geo-FENNEL

geo-FENNEL Torpedo Bedienungsanleitung

Beliebte Laser-Nivelliergerät Handbücher anderer Marken

Nedo

Nedo ET-5 Bedienungsanleitung

LaserLiner

LaserLiner X2-Laser Bedienungsanleitung

Spectra

Spectra LL300N Bedienungsanleitung

Nedo

Nedo Crossliner 4 Bedienungsanleitung

Lasertec

Lasertec FX360G Bedienungsanleitung

Flex

Flex ALC 8 Bedienungsanleitung

Black & Decker

Black & Decker LZR5 Bedienungsanleitung

Johnson

Johnson 40-6692 Bedienungsanleitung

Cocraft

Cocraft HL 20-SG Bedienungsanleitung

Zircon

Zircon iLine Bedienungsanleitung

HWH

HWH 310 SERIES Bedienungsanleitung

Leica

Leica iCON robot 60 Bedienungsanleitung

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Bedienungsanleitung

LaserLiner

LaserLiner ActiveFinder XP Bedienungsanleitung

DeWalt

DeWalt DW082 Bedienungsanleitung

imex

imex EL20 Bedienungsanleitung

Fixturlaser

Fixturlaser NXA D I-0912 Bedienungsanleitung

Wacker Neuson

Wacker Neuson PAL450 Bedienungsanleitung

geo-FENNEL Maxi-Liner FL 60 Bedienungsanleitung

Beliebte Laser-Nivelliergerät Handbücher anderer Marken