Gigabyte 6VA Bedienungsanleitung
6VA
1
TABLE OF CONTENTS
1. INTRODUCTION
1.1. PREFACE............................................................................................................ 1-1
1.2. KEY FEATURES................................................................................................. 1-1
1.3. PERFORMANCE LIST........................................................................................ 1-2
1.4. BLOCK DIAGRAM............................................................................................... 1-3
1.5. INTRODUCE THE PentiumII / III Processor ................................................... 1-5
1.6. What is AGP?...................................................................................................... 1-6
2. SPECIFICATION
2.1. HARDWARE ....................................................................................................... 2-1
2.2. SOFTWARE........................................................................................................ 2-2
2.3. ENVIRONMENT.................................................................................................. 2-2
3. HARDWARE INSTALLATION
3.1. UNPACKING....................................................................................................... 3-1
3.2. MAINBOARD LAYOUT....................................................................................... 3-2
3.3. QUICK REFERENCE FOR JUMPERS & CONNECTORS................................ 3-3
3.4. DRAM INSTALLATION....................................................................................... 3-6
3.5. CPU SPEED SETUP........................................................................................... 3-6
3.6. CMOS RTC & ISA CFG CMOS SRAM............................................................... 3-8
3.7. SPEAKER CONNECTOR INSTALLATION........................................................ 3-8
3.8. HARDWARE RESET SWITCH CONNECTOR INSTALLATION...................... 3-8
3.9. POWER LED CONNECTOR INSTALLATION................................................... 3-8
Table Of Contents
2
3.10. IDE & ATAPI DEVICE INSTALLATION............................................................ 3-9
3.11. PERIPHERAL DEVICE INSTALLATION.......................................................... 3-9
3.12. KEYBOARD & PS/2 MOUSE INSTALLATION................................................. 3-9
4. BIOS CONFIGURATION
4.1. ENTERING SETUP............................................................................................. 4-1
4.2. CONTROL KEYS ................................................................................................ 4-1
4.3. GETTING HELP.................................................................................................. 4-2
4.3.1. Main Menu............................................................................................... 4-2
4.3.2. Status Page Setup Menu / Option Page Setup Menu.............................. 4-2
4.4. THE MAIN MENU................................................................................................ 4-2
4.5. STANDARD CMOS SETUP MENU.................................................................... 4-4
4.6. BIOS FEATURES SETUP .................................................................................. 4-8
4.7. CHIPSET FEATURES SETUP........................................................................... 4-13
4.8. POWER MANAGEMENT SETUP...................................................................... 4-16
4.9. PNP/PCI CONFIGURATION .............................................................................. 4-20
4.10. LOAD BIOS DEFAULTS................................................................................... 4-22
4.11. LOAD PERFORMANCE DEFAULTS ............................................................... 4-23
4.12. INTEGRATED PERIPHERALS......................................................................... 4-24
4.13. USER PASSWORD.......................................................................................... 4-29
4.14. IDE HDD AUTO DETECTION.......................................................................... 4-30
4.15. SAVE & EXIT SETUP ....................................................................................... 4-31
4.16. EXIT WITHOUT SAVING ................................................................................. 4-32
6VA
1-1
1. INTRODUCTION
1.1. PREFACE
Welcome to use the 6VA motherboard. It is a PentiumII / III / Celeron
Processor based PC /AT compatible system with AGP / PCI / ISA Bus, and
has been designed to be the fastest PC / AT system. There are some new
features allow you to operate the system with just the performance you want.
This manual also explains how to install the motherboard for operation, and
how to set up your CMOS CONFIGURATION with BIOS SETUP program.
1.2. KEY FEATURES
qIntel PentiumII / III / CeleronProcessor based PC / AT compatible
main board.
qSlot 1 supports PentiumII / III / CeleronProcessor running at 233-
633 MHz.
qVIA 82C693 chipset, Supports AGP / SDRAM / Ultra DMA33 IDE /
Keyboard and PS/2 Mouse Power On / ACPI features.
qSupports 4xDIMMs using 3.3V SDRAM DIMM module.
qSupports 16MB ~ 1 GB SDRAM memory on board.
qSupports ECC or Non-ECC type DRAM module.
q1xAGP slot, 4xPCI Bus slots, 2xISA Bus slots.
qSupports 2 channels Ultra DMA 33 IDE ports for 4 IDE Devices.
qSupports 2xCOM (16550), 1xLPT, 1x1.44MB Floppy port.
qSupports USB port & PS/2 Mouse port.
qLicensed AWARD BIOS, 2M bits FLASH RAM.
q25.5cm x 22.2 cm BABY AT SIZE form factor, 4 layers PCB.
Introduction
1-2
1.3. PERFORMANCE LIST
The following performance data list is the testing results of some popular
benchmark testing programs.
These data are just referred by users, and there is no responsibility for
different testing data values gotten by users. (The different Hardware &
Software configuration will result in different benchmark testing results.)
•CPU PentiumIII processor
•DRAM (128x1)MB SDRAM (MITSUBSHI M5M4V64S30ATP-8)
•CACHE SIZE 512 KB included in CPU
•DISPLAY GA-630 AGP Display Card (16MB SGRAM)
•STORAGE Onboard IDE (Seagate ST34520A)
•O.S. Windows NT™4.0 SPK4
•DRIVER Display Driver at 1024 x 768 x 64k colors x 75Hz.
VIA Bus Master IDE Driver
Intel PentiumIII
Processor 450MHz(100x4.5
)400MHz(100x4)
Winbench99
CPU mark32 1130 1010
FPU Winmark 2280 2050
Business Disk 4450 4330
Hi-End Disk 10500 10300
Business Graphics 193 178
Hi-End Graphics 347 315
Winstone99
Business 29.7 25.8
6VA
1-3
Hi-End 27.3 25.6
Introduction
1-4
3.3V EDO/SDRAM
DIMM Sockets
Floppy Port
1.4. BLOCK DIAGRAM
66MHz
Ultra DMA/33
IDE Ports
24MHz
14.318MHz
33MHz
33MHz
33MHz
66MHz
66MHz
IDE Bus
PCI Bus
ISA Bus
AGP Bus
LPT Port
Keyboard
COM Ports
DRAM Bus
PS/2 Mouse
USB Bus
USB Ports
14.318MHz
48MHz
14.318MHz
I/O
CHIPSET
83977EF
66MHz
AGP SLOT Host Bus
VIA
82C693
CHIPSET
Clock
Gen
VIA
82C596A
CHIPSET
Clock
Gen
SLOT 1
6VA
1-5
1.5. INTRODUCE THE Pentium
II / III Processor
Figure 1: Universal Retention Mechanism & attach Mount
Figure 2:OEM PentiumII Processor
Introduction
1-6
Figure 3:OEM PentiumIII Processor
1.6 What is AGP
?
The Accelerated Graphics Port (AGP) is a new port on the Host-To-PCI
bridge device that supports an AGP port. The main purpose of the AGP port
is to provide fast access to system memory.
The AGP port can be used either as fast PCI port (32-bits at 66MHz vs. 32-
bits at 33MHz) or as an AGP port which supports 2x data-rate, a read queue,
and side band addressing. When the 2x-data rate is used the port can
transmit data at 533MB/sec (66.6*2*4). The read-queue can be used to
pipeline reads –removing the effects of the reads-latency. Side band
addressing can be used to transmit the data address on a separate line in
order to speed up the transaction.
Specification
2-1
2. SPECIFICATION
2.1. HARDWARE
•CPU −PentiumII / III / CeleronProcessor
233 –633 MHz.
−242 pins 66/100MHz slot1 on board.
•SPEED −66 / 100MHz system speed.
−66 MHz AGP bus speed. (133MHz 2*mode)
−33 MHz PCI-Bus speed.
−8 MHz AT bus speed.
•DRAM MEMORY −4 banks 168 pins DIMM module sockets on board.
−Use 16 / 32 / 64 / 128 / 256 MB DIMM module
DRAM.
−Supports 16MB ~ 1 GB SDRAM.
−Supports 3.3V SDRAM.
−Supports ECC or Non-ECC type DRAM.
•CACHE MEMORY −32 KB 1st cache memory included in CPU.
−128KB / 512 KB L2 cache memory included in
CPU.
−Supports DIB speed mode for L2 Cache.
•I/O BUS SLOTS −4 33MHz Master / Slave PCI-BUS.
−2 8MHz 16 bits ISA BUS.
−1 66MHz / 133MHz AGP bus.
•IDE PORTS −2 Ultra DMA 33 Bus Master IDE channels on
board.(Using IRQ14,15)
−Support Mode 3,4 IDE & ATAPI CD –ROM.
6VA
2-2
•I/O PORTS −Supports 2 16550 COM ports.
−Supports 1 LPT port.
−Supports 1 Floppy port.
−Supports 2 USB ports.
−Supports PS/2 Mouse.
•GREEN FUNCTION −Suspend mode support.
−Green switch & ACPI LED support.
−IDE & Display power down support.
−Monitor all IRQ / DMA / Display / I/O events.
•BIOS −2M bits FLASH RAM.
−Supports Plug & Play, DMI Function.
•DIMENSION −BABY AT Form Factor, 4 layers PCB.
2.2. SOFTWARE
•DRIVER −UUCD
Bus Master IDE Driver
•BIOS −Licensed AWARD BIOS.
−AT CMOS Setup, BIOS / Chipset Setup, Green
Setup, Hard Disk Utility included.
•O.S. −Operation with MS-DOS, Windows95,
Windows98, WINDOWSNT, OS/2, NOVELL
and SCO UNIX.
2.3. ENVIRONMENT
•Ambient Temp. −0°C to +50°C (Operating).
•Relative Hum. −0 to +85% (Operating).
•Altitude −0 to 10,000 feet (Operating).
•Vibration −0 to 1,000 Hz.
•Electricity −4.9 V to 5.2 V. (Max. 20A current at 5V.)
Inhaltsverzeichnis
Andere Gigabyte Hauptplatine Handbücher
Gigabyte
Gigabyte GA-H81M-S1 Bedienungsanleitung
Gigabyte
Gigabyte GA-78LMT-S2PT Bedienungsanleitung
Gigabyte
Gigabyte GA-E240N Bedienungsanleitung
Gigabyte
Gigabyte GA-8LS533 Bedienungsanleitung
Gigabyte
Gigabyte GA-H61M-S2P-B3 Bedienungsanleitung
Gigabyte
Gigabyte GA-H67A-UD3H-B3 Bedienungsanleitung
Gigabyte
Gigabyte GA-Q170M-D3H Bedienungsanleitung
Gigabyte
Gigabyte GA-945PL-S3 Bedienungsanleitung
Gigabyte
Gigabyte 6OXET Series Bedienungsanleitung
Gigabyte
Gigabyte GA-6BXU Bedienungsanleitung
Gigabyte
Gigabyte GA-8IG1000MK Bedienungsanleitung
Gigabyte
Gigabyte Z490 VISION G Bedienungsanleitung
Gigabyte
Gigabyte GA-8I955X Royal Bedienungsanleitung
Gigabyte
Gigabyte GA-H81M-D2V Bedienungsanleitung
Gigabyte
Gigabyte Z370 HD3P Bedienungsanleitung
Gigabyte
Gigabyte X470 AORUS GAMING 7 WIFI Bedienungsanleitung
Gigabyte
Gigabyte GA - 686LX3 Bedienungsanleitung
Gigabyte
Gigabyte GA-Z97X-Gaming 3 Bedienungsanleitung
Gigabyte
Gigabyte GA-780T-D3L Bedienungsanleitung
Gigabyte
Gigabyte GA-7VAXP-A Ultra Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
Biostar
Biostar M7VIT Bravo Bedienungs- und Montageanleitung
