Gima 27337 Bedienungsanleitung
CODE 27337
ORCHIDOMETER: USER MANUAL
INTRODUCTION:
An orchidometer is used to measure the volume of the testicles. It consists of a string of
twelve numbered wooden beads of increasing size from about 1 to 25 millimeters. The
orchidometer can be used to determine size of testes.
Discrepancy of testicular size with other parameters of maturation can be an important
clue to various diseases.
SYMBOLS:
Symbol
Definition of Symbol
ATTENTION: See Instructions for Use
CE mark has been identified according to Article 17 of the MDD
(93/42/EEC)
Symbol for “BATCH CODE”
This symbol shall be accompanied by the name and the address of
the manufacturer
Symbol for “CATALOGUE NUMBER”
PLEASE READ THE FOLLOWING INFORMATION BEFORE USING THE
ORCHIDOMETER:
Warnings
1. Keep it out of children’s reach.
2. Keep it away from flame.
Caution
1. It is necessary to read this user’s manual carefully before using this product.
2. Follow local governing ordinances and recycling instructions regarding disposal or
recycling of the device and components.
3. Please handle orchidometer with care to ovoid any damage resulting from abnormal
use.
Gima S.p.A. - Via Marconi, 1 - 20060 Gessate (MI) - Italy
Export: phone + 39 02 953854209/221/225 - fax + 39 02 95380056
CLEANING AND MAINTENANCE:
Use a cleaning cloth or a tissue paper, slightly dampened with disinfectant, to clean and
maintain the surface of the orchidometer.
INSTRUCTIONS FOR USING THE ORCHIDOMETER
In order to measure the volume of the testicles of a patient, beads of orchidometer are
compared to the testicle area. The volume number on the bead that best matches the size
of a testicle is then read.
Number on the bead that best matches the
size of a testicle
Indicated Sexual Development Stage
1~3
Childhood
4, 6
Early Puberty
8, 10
Mid puberty
14, 16
Late puberty
18, 25
Adulthood
GIMA WARRANTY CONDITIONS
Congratulations for purchasing a GIMA product. This product meets high qualitative
standards both as regards the material and the production. The warranty is valid for 12
months from the date of supply of GIMA. During the period of validity of the warranty,
GIMA will repair and/or replace free of charge all the defected parts due to production
reasons. Labor costs and personnel traveling expenses and packaging not included. All
components subject to wear are not included in the warranty. The repair or replacement
performed during the warranty period shall not extend the warranty. The warranty is void in
the following cases: repairs performed by unauthorized personnel or with non-original
spare parts, defects caused by negligence or incorrect use. The warranty is void if the
above regulations are not observed and if the serial code (if available) has been removed,
cancelled or changed. The defected products must be returned only to the dealer the
product was purchased from. Products sent to GIMA will be rejected.
GIMA S.p.A. Via Marconi, 1 –20060 Gessate (MI) –Italy
Rev. 0.09.10
Inhaltsverzeichnis
Andere Gima Messgerät Handbücher
Gima
Gima DL-F03 Bedienungsanleitung
Gima
Gima Simpson 400 Bedienungsanleitung
Gima
Gima FAT 2 Bedienungsanleitung
Gima
Gima AISI 430 Bedienungsanleitung
Gima
Gima 24903 Bedienungsanleitung
Gima
Gima HS-201T Bedienungsanleitung
Gima
Gima 27326 Stücklistenhandbuch
Gima
Gima CM-1621 Bedienungsanleitung
Gima
Gima SP-10 Bedienungsanleitung
Gima
Gima BC401 Bedienungsanleitung
Gima
Gima 35093 Stücklistenhandbuch
Gima
Gima BC401 Bedienungsanleitung
Gima
Gima WT1 Bedienungsanleitung
Gima
Gima 27346 Bedienungsanleitung
Gima
Gima 32579 Bedienungsanleitung
Gima
Gima RS01 Bedienungsanleitung
Gima
Gima SP-10 Bedienungsanleitung
Gima
Gima Sonoline C Bedienungsanleitung
Gima
Gima VITAL-SNET Bedienungsanleitung
Gima
Gima Dallas Bedienungsanleitung
