Glacier bay 67536-1001 Montageanleitung

THANK YOU

INSTALLATION AND CARE GUIDE

We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this kitchen

faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see

our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

PULL-DOWN KITCHEN FAUCET

Questions, problems, missing parts?

Before returning to the store, call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER (1-855-434-5224)

HOMEDEPOT.COM

YOW 10/2014 REV.01

Model#

SKU#

67536-1001

67536-1008D2

67536-1027H2

682-892

665-466

682-894

Table of Contents

Important Information..............................2

Warranty ...................................................2

Pre-Installation.........................................2

Planning Installation ..............................2

Package Contents..................................3

Installation................................................4

Operation ..................................................12

Troubleshooting ......................................14

Care and Cleaning

...................................

Service Parts

...........................................

Adjustable

wrench

Safety

goggles

Phillips

screwdriver

SILICONE

Silicone

sealant

6mm

diameter

Electric

drill

Tools and Hardware Required ...............2

Important Information

□ Observe all local plumbing and building codes.

□ Cover the sink drain to avoid losing any parts.

□ Review the care and cleaning section included in this guide.

Warranty

LIMITED LIFETIME WARRANTY

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of

defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.

Sensor mechanism and LED light excluded from Limited Lifetime Warranty and are covered by a 3-year warranty

from date of purchase. Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-

GLACIER (1-855-434-5224) to receive the replacement item. Proof of purchase (original sales receipt) from the

original consumer purchaser must be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and

tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended

a ve year limited warranty from the date of purchase, with all other terms of this warranty applying except the

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other

rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for

more details.

Pre-Installation

PLANNING INSTALLATION

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package

Contents list. If any part is missing or damaged, do not attempt to install the product. Contact customer service

for replacement parts.

TOOLS AND HARDWARE REQUIRED

Channel

lock pliers

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

A 1Faucet body

B 1

C Metal washer 1

Rubber washer

D 1

E Protective cap 1

Nut

H 2

IGasket 1

Bolt

FWrench 1

G Escutcheon 1

LWeight clip 1

JMounting nut 2

K 1Hose & Sprayhead

Part Description Quantity

MWeight 1

NQuick connect

assembly 1

O 1

P Battery pack 1

Sensor control box

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

R 1

SSoap assembly 1

Soap pump

T 1

USoap bottle 1

Soap dispenser

mounting nut

Q"AA" Battery 4

Sensor Control Box

Soap Pump Assembly

Installation

1 Installing the faucet assembly

□Install the faucet body (A)-including supply

hoses and sensor cable (1)-through the hole

in the sink.

CAUTION: Always turn off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

NOTE: This step is for no escutcheon installation (optional).

If the escutcheon will be used, install the faucet assembly

as described in step 2.

2Installing the escutcheon

□Screw the bolts (H) into the escutcheon (G) and

ensure that the gasket (I) is pressed onto the

escutcheon (G) before the escutcheon (G) is

installed over the three holes in the sink.

□Secure the escutcheon (G) to the sink using the

mounting nuts (J) provided. Hand tighten only.

NOTE: If the sink is uneven, use silicone under the

gasket (I).

NOTE: This step is for escutcheon installation (optional).

If the escutcheon will not be used, install the faucet

assembly as described in step 1.

□Shut off the water supply. Remove the old

faucet.

□Clean the mounting surface.

□Proceed to step 4.

Installation (continued)

3 Installing the faucet assembly

□Install the faucet body (A)-including supply

hoses and sensor cable (1)-through the hole

in the escutcheon (G).

NOTE: This step is for escutcheon installation (optional).

If the escutcheon will not be used, install the faucet

assembly as described in step 1.

4 Securing the faucet assembly

□Install the rubber washer (B) and metal washer (C)

onto the threaded shank.

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

□Thread the mounting nut (D) onto the shank using

the wrench (F) provided to tighten rmly.

Installation (continued)

5 Installing the protective cap

□Screw the protective cap (E) onto the threaded

mounting shank (1).

Installing the pulldown hose

□Before installing the hose (K), ensure that the

protective cap (1) is on the end of the hose (K).

□Insert the small end of the pulldown hose (K) into

the spout (2) and feed through faucet body (A)

and the threaded mounting shank (3) in the

direction shown below.

7 Attaching the quick connector

to the hose

□Before installing the quick connector, remove

and discard the protective cap (1) from the

pulldown hose (K).

□Attach the quick connector (N) by screwing it

onto the threaded end of the hose (K) in a

clockwise motion. Hand tighten only.

Installation (continued)

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Attaching the quick connector

to the receiving block

NOTE: The side of the control box (O) with "in" and "out"

showing must face the front of the cabinet (away from the

back of the cabinet).

□Connect the hose with the yellow tag to the hose

on the control box (O) with a matching yellow tag.

Push rmly together until they snap into place.

NOTE: If you want to use the faucet without the sensor

feature or without power, you can attach the quick

connector (1) to the receiving block (2). This bypasses the

sensor feature and enables the faucet to work by operating

the handle.

□Connect the hose with the green tag to the hose

on the control box with a matching green tag.

Push rmly together until they snap into place.

9Installing the sensor cable

□Install the data cable (1) to the control box connection (2). Ensure the arrows on the data cable (3) and the

control box connection (4) are aligned to one another to ensure proper installation. Ensure they are tightly

connected by rmly pushing together.

□Secure the connection by hand tightening the nut (5) in a clockwise direction onto the threaded sensor cable.

CAUTION: If the connections are not made properly, the

sensor feature will not work.

Yellow

Green

Installation (continued)

10Installing the batteries

□Squeeze the side indicated by the arrows (5) below on the battery pack (P) and then pull down to remove

the cover (1). See g 1.

□Install the four AA batteries (Q) included by matching the positive (+) and Negative (-) ends on the battery (Q)

to the (+) and (-) markings in the battery pack (P). The negative ends of the battery (Q) should always

connect to the spring end of the battery slots in the battery pack (P). See g 2.

□Reinstall the battery pack cover (1) by pushing up and snapping into place. See gure 3.

NOTE: When the sensor ashes 10 times continuously

and slowly, the batteries have lost their charge. Replace

the batteries (Q).

NOTE: This step is for batteries installation (optional). If the

batteries will not be used, install as described in step 12.

Figure 1 Figure 2 Figure 3

(+)

(-)

5(-)

(+)

(-)

Installation (continued)

11Installation using the battery

pack

□There are 2 options to secure the battery pack (P) under the counter: Tape Installation or Screw Installation.

□Screw Installation: Drill holes in the wall using a 6mm (15/64”) diamater drill bit. Install the battery pack

seat (1) using the molly anchors (3) and screws (4) provided.

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

□Tape Installation: Attach one side of the double sided tape (2) to the battery pack seat (1). Firmly attach the

battery pack seat (1) to the cabinet wall. Place the battery pack (P) into the battery pack seat (1).

NOTE: This step is for battery installation (optional). If the

battery will not be used, install as described in step 12. Before

installation, select the location for the battery pack (P) and

verify that the battery pack wire will reach the connection on

the bottom of the control box (O).

□Insert the battery pack cable (5) into the control box connection (6). Ensure the arrows on the data cable (7)

and the control box connection (8) are aligned to one another to ensure proper installation.

Screw Installation

(15/16") dia.

6mm

Tape Installation

CAUTION: If the connections are not made properly, the

sensor feature will not work.

Installation (continued)

12Installation using the AC

adapter (not included)

NOTE: This step is for installation without batteries using

an AC adapter (not included). If using the batteries, install

as instructed in step 10 and skip to step 13. The AC adapter

is not included with the product, but can be purchased from

Homedepot.com.

□Install the AC adapter (5) into the power outlet.

□Insert the AC adapter cable (1) into the control box port (2). Ensure the arrows on the data cable (3) and the

control box connection (4) are aligned to one another to ensure proper installation.

CAUTION: If the connections are not made properly, the

sensor feature will not work.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Glacier bay Küchen- und Badezimmerausstattung Handbücher

Glacier bay

Glacier bay ZALE 13-0089-W Bedienungsanleitung

Glacier bay

Glacier bay 67576W-6001 Montageanleitung

Glacier bay

Glacier bay ACS3021A1Q Bedienungsanleitung

Glacier bay

Glacier bay EAGLETON HD67540-1010H Montageanleitung

Glacier bay

Glacier bay FP4A4080SS Bedienungsanleitung

Glacier bay

Glacier bay VUR2318A1 Bedienungsanleitung

Glacier bay

Glacier bay VDR2522B1 Bedienungsanleitung

Glacier bay

Glacier bay MELINA HD67568-1201 Montageanleitung

Glacier bay

Glacier bay FP1B4202SS Montageanleitung

Glacier bay

Glacier bay HD67099-0B01 Montageanleitung

Glacier bay

Glacier bay VDR3322A0 Bedienungsanleitung

Glacier bay

Glacier bay FP1B4201CP Montageanleitung

Glacier bay

Glacier bay HD67302W-6101 Montageanleitung

Glacier bay

Glacier bay VUR2318A1 Bedienungsanleitung

Glacier bay

Glacier bay HD67495-1008D2 Montageanleitung

Glacier bay

Glacier bay HDQFW6AC012CP Montageanleitung

Glacier bay

Glacier bay F51A0074CP Montageanleitung

Glacier bay

Glacier bay 4165F Bedienungsanleitung

Glacier bay

Glacier bay MCKENNA HD67726W-120602 Montageanleitung

Glacier bay

Glacier bay 4168F Bedienungsanleitung

Glacier bay

Glacier bay HD67798W-1308D2 Montageanleitung

Glacier bay

Glacier bay MCKENNA HD67737-3001 Montageanleitung

Glacier bay

Glacier bay HD873X-3601 Montageanleitung

Glacier bay

Glacier bay HD67568-1101 Montageanleitung

Beliebte Küchen- und Badezimmerausstattung Handbücher anderer Marken

Grohe

Grohe BRIDGEFORD 33 870 Bedienungsanleitung

Hans Grohe

Hans Grohe Zenio Metro 31811000 Bedienungsanleitung

Gröne

Gröne Zedra 32 555 Bedienungsanleitung

Transform

Transform QL045 Bedienungsanleitung

Sanela

Sanela SLU 09PTB Bedienungsanleitung

Lefroy Brooks

Lefroy Brooks C1-1400 Montageanleitung

Grohe

Grohe Rapido E Bedienungsanleitung

Danze

Danze D302455 Bedienungsanleitung

Waterworks

Waterworks CEKM30 Merkblatt

Helvex

Helvex Omega TV-298 Bedienungsanleitung

Tribata.

Tribata. GEORGIAN G5393 Bedienungsanleitung

Alpha Bidet

Alpha Bidet Alpha One Bedienungsanleitung

InSinkErator

InSinkErator H/HC3300 Installationshandbuch

Clou

Clou Xo type 1 Bedienungsanleitung

Kohler

Kohler Contra 26448T-4 Bedienungsanleitung

Grohe

Grohe Bridgeford 20 158 Bedienungsanleitung

Hans Grohe

Hans Grohe Croma Select S 180 Showerpipe EcoSmart... Bedienungsanleitung

Wickes

Wickes MONO SINK MIXER Bedienungsanleitung