Glacier bay HD67615W-6001 Montageanleitung

THANK YOU

INSTALLATION AND CARE GUIDE

Questions, problems, missing parts?

Before returning to the store, call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER (1-855-434-5224)

HOMEDEPOT.COM

TWO-HANDLE LAVATORY FAUCET

We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this lavatory

faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see

our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

11/2018 REV.01HOMEDEPOT.COM

Model#

HD67615W-6001

HD67615W-6004

HD67615W-6027D

Internet#

306838664

306838689

306838690

SKU#

1003621043

1003619050

1003618902

Table of Contents

Important Information..............................2

Warranty ...................................................2

Pre-Installation.........................................2

Planning Installation ..............................2

Package Contents..................................3

Installation................................................4

Care and Cleaning ....................................10

Troubleshooting........................................10

Service Parts

...........................................

Important Information

□ Observe all local plumbing and building codes.

□ Cover the sink drain to avoid losing any parts.

□ Review the care and cleaning section included in this guide.

Pre-Installation

PLANNING INSTALLATION

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package

Contents list. If any part is missing or damaged, do not attempt to install the product. Contact Customer Service

for replacement parts.

TOOLS AND HARDWARE REQUIRED

Tools and Hardware Required ...............2

Operation...................................................9

Phillips

screwdriver

Basin

wrench

Adjustable

wrench

Safety

goggles

Channel

lock pliers

(2) Supply

lines

SILICONE

Silicone

sealant

HacksawPliers

Warranty

LIMITED LIFETIME WARRANTY

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of

defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.

Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-

5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer

purchaser must be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and

tear. This warranty excludes all industrial, commercial and business usage, whose purchasers are hereby extended

a ve year limited warranty from the date of purchase, with all other terms of this warranty applying except the

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other

rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for

more details.

Contact the Customer Service Team at 1-855-434-5224 or visit www.HomeDepot.com.

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

A 1

BHandle assembly

- Hot 1

CHandle assembly

- Cold 1

IQuick connect hose 1

Faucet body

D 2

ENut 2

FScrew 4

Washer

G 1

HLock nut 1

Washer

Part Description Quantity

Faucet Assembly ClickInstall Drain Assembly

NOTE: *Items J - N come pre-assembled.

J 1Pop up stopper

K 1Pop-up ange

L 1Rubber washer

M 1Lock nut

N 1Drain body

O 1Joint

P 1Horizontal rod

Q 1Lift rod strap

S 1Lift rod

R 1Clip

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Installation

1 Installing the faucet assembly

CAUTION: Always shut off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

□Place the faucet (A) through the mounting

holes in the sink.

□Secure the faucet (A) to the sink using the

washer (G) and lock nut (H) provided.

2 Installing the faucet handles

□Remove the preassembled nuts (E) and washers

(D) from the hot and cold faucet handles (B and C).

□Insert the hot faucet handle (B) to the left of the

spout and cold faucet handle (C) to the right of

the spout.

NOTE: The hot water valve is identied with a label.

□Shut off the water supply. Remove the old

faucet.

□Clean the mounting surface. □Loosen the screws (F) on the nuts (E) until the

ends of the screws (F) are ush with the face of

the nuts (E).

□Attach the faucet handles (B and C) underneath

the sink using the washers (D) and nuts (E).

Securely tighten the screws (F) on the nuts (E).

□Remove the preassembled lock nut (H) and

washer (G) from the new faucet (A).

NOTE: Ensure that the hole for the lift rod faces toward

the rear of the sink during installation. When you insert the

lift rod (S), the lift rod (S) can go through the faucet (A) and

down into the slot of the washer (G).

Installation (continued)

4 Installing the drain body

□Apply silicone sealant (not included) under the

drain ange (K) and place the drain ange (K)

into the drain hole of the sink.

□From underneath the sink, screw the drain

body (N) onto the drain ange (K). Ensure that

the opening (1) for the ball rod on the drain

body (N) faces towards the rear of the sink.

3 Preparing the pop-up assembly

□Remove the pop-up stopper (J) and drain

ange (K) from the drain body (N).

□ Tighten the rubber washer (L) and lock nut (M)

on the drain body (N). Hand-tighten only.

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

SILI

Installation (continued)

5 Installing the stopper and

horizontal rod

□Insert the stopper (J) into the drain hole in the

sink.

□Before installation, unscrew the protective cap

(1) from the horizontal rod (P).

□Slide the lift rod (S) down into the lift rod

strap (Q) through the faucet (A) until it clicks

into the lift rod strap (Q).

Installing the lift rod

□Insert the horizontal rod (P) into the drain body

(N) and through the hole of the stopper (J) until

you hear a click. See insert 2. You can press the

two sides of the joint (O) to remove the horizontal

rod (P).

NOTE: For easier removal and cleaning, rotate the stopper

(J) 90 degrees so that the horizontal rod (P) does not go

through the hole in the stopper (J). See insert 3.

Insert 3

Insert 2

NOTE: If a shorter lift rod (S) is required for your

installation, you may call Glacier Bay Customer Service

for assistance.

Installation (continued)

8Adjusting the length of lift rod strap (optional)

□If the pop up lift rod strap (Q) is interfering with your installation, as shown in Fig. 1, the lift rod strap (Q)

can be cut shorter.

□Once you have identied the proper hole in the lift rod strap (Q) that is necessary for your installation, you

may cut off the bottom portion (1) of the lift rod strap (Q) by snapping it off with pliers or cutting it off with

a saw at the cutting point (2), as shown in Fig. 2. Ensure the clip (R) does not slide off the lift rod strap (Q).

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

□Slide the clip (R) upward, adjust the location of the lift rod strap (Q) to the appropriate height and insert

the horizontal rod (P) with the correct hole of the lift rod strap (Q).

□Move the lift rod strap (Q) in or out to choose an appropriate location.

□Press the horizontal rod (P) down to ensure the stopper (J) is in the maximum open position.

Attaching the horizontal rod and strap

□Slide the clip (R) downward until it secures with the horizontal rod (P).

Hole 5

Fig. 1 Fig. 2

Installation (continued)

9Checking the operation of the

pop-up

□Operate the lift rod (S) up and down to verify

that the stopper (J) opens and closes correctly.

10 Attaching the quick connect

hose

□Attach the quick connect hose (I) connections

to the hot faucet handle (B) connection, faucet

body (A) connection, and cold faucet handle (C)

connection. Push until the connections snap

together.

□Pull down moderately to ensure the connections

have been made.

Making the water supply

connections

□Use 1/2 in. I.P.S. faucet connections (2), or use

supply line coupling nuts (3) (not included) with

a 3/8 in. O.D. ball-nose riser (1).

NOTE: Before tightening the faucet connector to the water

supply, apply a second wrench to the supply tube tting.

This will prevent the supply tube from moving or twisting

when tightening the faucet connector. Do not overtighten.

Installation (continued)

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Operation

1Flushing and checking for leaks

IMPORTANT: After installation is complete, remove the

aerator from the faucet (A) with a coin (1) to ush the water

lines.

□Ensure the faucet (A) handles are in the off

position and turn on the water supply to check

for leaks. If you discover any leaks, check your

connections to ensure they are installed properly.

□Remove the aerator and housing (if applicable).

Turn on the hot and cold handles to allow the

water to run for at least one minute. This

ushes away any debris that could cause

damage to internal parts.

□Turn off the water and reinstall the aerator and

housing (if applicable).

2Removing the quick connector

□If it is necessary to remove the quick connector

(1), squeeze the tabs (2) on the quick connector

and then pull down to disconnect.

Care and Cleaning

□To clean, wipe down with a damp cloth and dry with a towel.

□Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will

be voided.

Operation (continued)

Squeeze

Pull

down

Troubleshooting

Problem Possible Cause Solution

There are leaks from the

handle.

The bonnet nut has come loose and/or the

washer is dirty or damaged.

□Tighten the bonnet nut.

□Clean or replace the washer.

The aerator has an

irregular or reduced

water ow.

□Remove the aerator and

check for debris.

The water will not shut off

completely.

The cartridge is dirty or broken. □Remove the handle to check

the cartridge.

□Clean or replace.

The aerator is dirty or mis-tted.

NOTE: Refer to the service parts section in this manual for

a detailed drawing showing the location of the parts listed

below.

There is leaking from the

sink drain at the base of

the sink.

The sink has a rough or irregular surface. □Apply additional silicone sealant

to the beveled side of the drain

ange.

□Retighten and test for leaks.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Glacier bay Küchen- und Badezimmerausstattung Handbücher

Glacier bay

Glacier bay HD67529W-6201 Montageanleitung

Glacier bay

Glacier bay HD873X-5D35 Montageanleitung

Glacier bay

Glacier bay HD65601-5101 Montageanleitung

Glacier bay

Glacier bay 4168F Bedienungsanleitung

Glacier bay

Glacier bay F51A0074CP Montageanleitung

Glacier bay

Glacier bay UPSON HD67553-010602 Montageanleitung

Glacier bay

Glacier bay MODERN HD67818W-6110H Montageanleitung

Glacier bay

Glacier bay 873W-6101 Montageanleitung

Glacier bay

Glacier bay HD67866W-6001 Montageanleitung

Glacier bay

Glacier bay Carla HD67826-0008D2 Montageanleitung

Glacier bay

Glacier bay HD67763W-5091 Montageanleitung

Glacier bay

Glacier bay 67534-0001 Montageanleitung

Glacier bay

Glacier bay FP4F0005CP Montageanleitung

Glacier bay

Glacier bay MCKENNA HD67726W-120602 Montageanleitung

Glacier bay

Glacier bay 67385-1108D2 Bedienungsanleitung

Glacier bay

Glacier bay HD67551-0301 Montageanleitung

Glacier bay

Glacier bay HDQFW6AC012CP Montageanleitung

Glacier bay

Glacier bay FP1B4201CP Montageanleitung

Glacier bay

Glacier bay HDSB252264 Bedienungsanleitung

Glacier bay

Glacier bay 13-0093-W-GB Bedienungsanleitung

Glacier bay

Glacier bay 67257W-0108D2 Montageanleitung

Glacier bay

Glacier bay 67737-0001 Montageanleitung

Glacier bay

Glacier bay 67099-0B01 Montageanleitung

Glacier bay

Glacier bay HD67099-0B01 Montageanleitung

Beliebte Küchen- und Badezimmerausstattung Handbücher anderer Marken

Grohe

Grohe BRIDGEFORD 33 870 Bedienungsanleitung

Hans Grohe

Hans Grohe Zenio Metro 31811000 Bedienungsanleitung

Gröne

Gröne Zedra 32 555 Bedienungsanleitung

Transform

Transform QL045 Bedienungsanleitung

Sanela

Sanela SLU 09PTB Bedienungsanleitung

Lefroy Brooks

Lefroy Brooks C1-1400 Montageanleitung

Grohe

Grohe Rapido E Bedienungsanleitung

Danze

Danze D302455 Bedienungsanleitung

Waterworks

Waterworks CEKM30 Merkblatt

Helvex

Helvex Omega TV-298 Bedienungsanleitung

Tribata.

Tribata. GEORGIAN G5393 Bedienungsanleitung

Alpha Bidet

Alpha Bidet Alpha One Bedienungsanleitung

InSinkErator

InSinkErator H/HC3300 Installationshandbuch

Clou

Clou Xo type 1 Bedienungsanleitung

Kohler

Kohler Contra 26448T-4 Bedienungsanleitung

Grohe

Grohe Bridgeford 20 158 Bedienungsanleitung

Hans Grohe

Hans Grohe Croma Select S 180 Showerpipe EcoSmart... Bedienungsanleitung

Wickes

Wickes MONO SINK MIXER Bedienungsanleitung