Gofanco HDEXT120ESD Bedienungsanleitung

HDMI CAT6 Extender with

ESD - 120m

User's Guide

G4-0081A

P/N: HDEXT120ESD

Thank you for purchasing from gofanco. Our

products aim to meet all your connectivity needs

wherever you go. For optimum performance

and safety, please read the instructions carefully

and keep this User’s Guide for future reference.

If you need more information about our

products, please visit www.gofanco.com. For

technical support, please email us at

[email protected]. For drivers/manuals,

please go to www.gofanco.com/download.

Important Safety Notices

Please read safety instructions carefully before

installation and operation.

• Please pay close attention to all warnings

and hints for this device

• Do not expose this unit to rain, heavy

moisture, or liquid

• Do not repair the device or open the

enclosure without professional guidance

to avoid electric shocks. Doing so may void

your warranty

• Keep the product in a well-ventilated

location to avoid damage from overheating

• Shut off power and make sure environment

is safe before installation

• Do not plug the HDMI cables and IR cables

in/out when the device is in use to avoid

cable damage. Make sure they are plugged

into the correct ports

• Use the included DC5V power adapters

only. Make sure the specification matches

if using 3rd-party DC power adapters

Introduction

The HDMI CAT6 Extender with ESD - 120m

transmits uncompressed HDMI signals up to 394

feet(120m)in1080pwithlessthan200mslatency.

Features

• HDMI 1.3, HDCP 1.4, 10.2Gbps bandwidth.

Supports 2-channel PCM audio

• ESD Protection – Prevents malfunction or

break down due to Electrostatic discharge

• IR Extension – Allows source device to

recognize remote commands from a remote

location

• Transmission Range – 120m (CAT6), 100m

(CAT5e), 80m (CAT5)

PackageContents

• Transmitter (TX)

• Receiver (RX)

• Power Adapter (2pcs)

• IR Blaster Cable (1pc)

• IR Receiver Cable (1pc)

• User's Guide

Installation Requirements

1. HDMI source device (computer, DVD

player, etc)

2. HDMI display device (SDTV/Monitor,

HDTV/Monitor, projector, etc.)

3. UTP/STP CAT6 cable following

IEEE-T568B wiring standard

Product Layout

Figure 1: Transmitter (TX)

1. Reset Button Press the button to reset the transmitter

2. RJ45 Output Connects to the Receiver's RJ45 Input port

using a CAT6 cable

3. Link LED Lights up when HDMI input signal detected

Flashes when no HDMI input signal detected

4. Power Jack Connects to the included power adapter

5. HDMI Input Connects to the HDMI source device

6. IR Output Connects to the IR Blaster cable

Figure 2: Receiver (RX)

1. Reset Button Push the button to reset the receiver

2. RJ45 Input Connects to the Transmitter's RJ45 Output

port using a CAT6 cable

3. Link LED Lights up when RJ45 from TX detected

Flashes when RJ45 from TX not detected

4. Power Jack Connects to the included power adapter

5. HDMI Out Connects to remote HDMI display

6. IR Input Connects to the IR receiver cable

Hardware Installation

1. Power off all devices including your HDMI

source and HDMI display.

2. Connect your HDMI source device to the

Transmitter's HDMI Input connector with

an HDMI cable (HDMI cable not included).

3. Optional: Connect the IR Blaster Cable to

the Transmitter's IR output port. Face the

eye towards your HDMI source device's IR

window. This connection is needed only if

you need to control your HDMI source

from the remote location.

4. Plug your CAT6 cable between the

Transmitter's RJ45 Output and Receiver's

RJ45 Input.

5. Connect your HDMI display to the

Receiver's HDMI output connector with an

HDMI cable (HDMI cable not included).

6. Optional: Connect the IR Receiver Cable to

theReceiver'sIRinputport. Thisconnection

is needed only if you need to control your

HDMI source device from the remote

location.

7. Plug the included power adapters into the

Transmitter's and Receiver's power jacks,

then plug both power adapters into a

reliable power source.

8. Power on all connected devices.

9. The HDMI extender is ready for use.

Application

CAT Cable Wiring

We suggest both RJ-45 connectors be wired

identically using T568B wiring standard for the

best performance and compatibility.

Transmitter (TX) Receiver (RX)

CAT6

IR Blaster Cable

IR Receiver Cable

HDMI Out

HDMI In

Display

DVD

FAQ & Solutions

Q: There is no video output or audio and

video display is not normal:

A: 1) Press the Receiver's reset button to reset

the unit.

2) Use a shorter network cable.

Q: The Receiver's Link LED is flashing:

A: 1) Make sure the network cable follows the

IEEE-T568B wiring standard.

2)CheckwhetherTXhasHDMIsignalinput.

3) Reset both TX & RX and reconnect.

Q: The extender is not working properly:

A: 1) Please check the cable lengths below:

- HDMI cables: Up to 5m

- Network cables (CAT6): Up to 120m

2) Press the reset button on the TX/RX and

reconnect.

Q: RX Link LED is on but there is no image:

A: 1) Press RX reset button to reset the unit.

2) Make sure the HDMI cable is firmly

connected to the display.

3) Make sure your HDMI display device is

set to the correct HDMI input.

4) Use a higher quality network cable.

Specifications

Item Specifications

HDMI Compliance 1.3

HDCP Compliance 1.4

Data Transmission <200ms latency

Video Bandwidth 10.2Gbps

Resolution

720x576@50Hz, 720x480@60Hz,

1280x720X60Hz, 1920x1080@60Hz,

640x480@60Hz, 800x600@60Hz,

1024x768@60Hz, 1280x800@60Hz,

1280x1024@60Hz, 1440x900@60Hz,

1680x1050@60Hz

ESD Protection

Contact discharge: Level 3

Air discharge: Level 3

Standard: IEC 61000-4-2

Audio Support PCM

IR Frequency Range 20KHz-60KHz

Power Adapter Output: 5VDC/1A

Power Consumption TX: 2W / RX: <2W

Product Dimensions 2.8" (L) x 2.3" (W) x 0.64" (H)

Weight TX: 70g

RX: 70g

Color Black

Inhaltsverzeichnis

Andere gofanco Extender Handbücher

gofanco

gofanco USBCVXP2VID Bedienungsanleitung

gofanco

gofanco prophecy PRO-HDRextract Bedienungsanleitung

gofanco

gofanco HDbitT4Pv2 Bedienungsanleitung

gofanco

gofanco HDExtCoax Bedienungsanleitung

gofanco

gofanco HD20Ext4P-LT Bedienungsanleitung

gofanco

gofanco 4K120 Bedienungsanleitung

gofanco

gofanco HD20Ext-Cas Bedienungsanleitung

gofanco

gofanco HD14Ext1xN Bedienungsanleitung

gofanco

gofanco AudioCATExt500 Bedienungsanleitung

gofanco

gofanco PRO-HDBaseT-U Bedienungsanleitung

gofanco

gofanco HD20Ext1xN Bedienungsanleitung

gofanco

gofanco HDMIExt2 Bedienungsanleitung

gofanco

gofanco HDMIExtSplit Bedienungsanleitung

gofanco

gofanco HD20Ext Bedienungsanleitung

gofanco

gofanco HDbitTv2 Bedienungsanleitung

gofanco

gofanco HDbitT4K Bedienungsanleitung

gofanco

gofanco HDwirelessMini Bedienungsanleitung

gofanco

gofanco Prophecy PRO-HDExtIP-TX Bedienungsanleitung

gofanco

gofanco KVMHDExt4K Bedienungsanleitung

gofanco

gofanco HDExt Bedienungsanleitung

gofanco

gofanco HDwireless100-LT Bedienungsanleitung

gofanco

gofanco HDwireless100 Bedienungsanleitung

gofanco

gofanco HDbaseT-HDR Bedienungsanleitung

gofanco

gofanco HD20wireless Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

gofanco HDEXT120ESD Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken