Gofanco HDbitTPro Bedienungsanleitung

HDMI HDbitT CAT5e/6

Extender 1080p with

Loopout - 120m

User's Guide

G4-0054A

P/N: HDbitTPro

Thank you for purchasing from gofanco. Our

products aim to meet all your connectivity needs

wherever you go. For optimum performance

and safety, please read the instructions carefully

and keep this User’s Guide for future reference. If

you need more information about our products,

please visit www.gofanco.com. For technical

support, pleaseemail usat [email protected].

For drivers/manuals download, please go to

http://www.gofanco.com/download.

Important Safety Notices

Please read safety instructions carefully before

installation and operation.

• Please pay close attention to all warnings

and hints for this device

• Do not expose this unit to rain, heavy

moisture, or liquid

• Do not repair the device or open the

enclosure without professional guidance to

avoid electric shocks. Doing so may void

your warranty

• Keep the product in a well-ventilated

location to avoid damage from overheating

• Shut off power and make sure environment

is safe before installation

• Do not plug the HDMI cables and IR cables

in/out when the device is in use to avoid

cable damage. Make sure they are plugged

into the correct ports

• Use the included DC5V power adapters

only. Make sure the specification matches if

using 3rd-party DC power adapters

Introduction

The HDMI HDbitT CAT5e/6 Extender 1080p

with Loopout - 120m extends high definition

1080p HDMI signals from a source device to a

display device up to 120 meters through a single

economical CAT5e/6 cable using advanced

HDbitT transport protocol.

Features

• Transmits HDMI signals from source device

to display device up to 120 meters using

economical CAT5e/6 cabling

• Supports IR remote control function to

controlthe sourcedevice fromlong distances

• Supports additional Receivers (part #

HDbitTPro-RX) sold separately

• HDMI out on the Transmitter (TX) for local

monitoring of the HDMI signal

• Easy and clean installation

Package Contents

Transmitter (TX) (1pc) Receiver (RX) (1pc) User's Manual (1pc)

Power Adapter

5VDC/1A (2pcs)

IR Blaster Extension

Cable (1pc)

IR Receiver Extension

Cable (1pc)

Product Layout

Figure 1: Transmitter (TX)

1Power LED: On when the Transmitter is

powered

2Activity LED: Blinks during data

transmission

3Link LED: On when the Cat5e/6 cable is

connected/linked properly to Transmitter's

and Receiver's RJ45

4Reset: Press to reset if HDMI extender

doesn't work properly

5Power Jack: Connect the included power

adapter here

6RJ45 Out: Link to Receiver's RJ45 In using a

Cat5e/6 cable

7IR Out: Infrared 3.5mm socket. Plug IR

Blaster Extension Cable here. See

instructions on page 8.

8HDMI Out: Connect an HDMI display here

for local monitoring of the HDMI signal

9HDMI In: Connect your HDMI source here

with an HDMI cable (cable not included)

Figure 2: Receiver (RX)

1Power LED: On when the Receiver is

powered

2Activity LED: Blinks during data

transmission

3Link LED: On when the Cat5e/6 cable is

connected/linked properly to Transmitter's

and Receiver's RJ45

4Reset: Press to reset if HDMI extender

doesn't work properly

5Power Jack: Connect the included power

adapter here

6RJ45 In: Link to Transmitter's RJ45 Out

using a Cat5e/6 cable

7IR In: Infrared 3.5mm socket. Plug IR

Receiver Extension Cable here. See

instructions on page 8.

8HDMI Out: Connect an HDMI display here

with an HDMI cable (cable not included)

Installation Requirements

1. HDMI source device (computer, DVD

player, etc)

2. HDMI display device (SDTV/Monitor,

HDTV/Monitor, projector, etc.)

3. UTP/STP CAT5e/6 cable following

IEEE-568B wiring standard

Hardware Installation

1. Power off all devices including your HDMI

source and HDMI display(s).

2. Connect your HDMI source device to the

Transmitter's HDMI Input connector with

an HDMI cable (HDMI cable not included).

3. Optional: Connect an HDMI display to the

Transmitter's HDMI out connector with an

HDMI cable (cable not included). This

connection is needed only if you need local

monitoring of the HDMI signal.

4. Optional: Connect the IR Blaster Extension

Cable to the Transmitter's IR Out port. Face

the eye towards your HDMI source device's

IR window. This connection is needed only

if you need to control your HDMI source

from the remote location.

5. Plug your Cat5e/6 cable between the

Transmitter's RJ45 Out and Receiver's RJ45

In.

6. Connect your HDMI display to the

Receiver's HDMI output connector with an

HDMI cable (HDMI cable not included).

7. Optional: Connect the IR Receiver Extension

Cable to the Receiver's IR In port. This

connection is needed only if you need to

control your HDMI source device from the

remote location.

8. Plug the included power adapters into the

Transmitter's and Receiver's power jacks,

then plug them into a reliable power source.

9. Power on all connected devices.

10. The HDMI extender is ready for use.

Application

1. One-to-One: Extends HDMI signals up to

120 meters over a single Cat5e/6 cable.

2. One-to-Many: Extend and split using

dedicated network router/switch.

- One Transmitter (TX) to several Receivers

(RX)

- Additional Receivers (part # HDbitTPro-

RX) sold separately

Transmitter

Receiver

Transmitter

Receiver

3. Cascade: Unlimited extension with

dedicated network router/switch.

Transmitter

Receiver

Inhaltsverzeichnis

Andere gofanco Extender Handbücher

gofanco

gofanco HDWirelessKVM Bedienungsanleitung

gofanco

gofanco KVMHDExt Bedienungsanleitung

gofanco

gofanco 4K120 Bedienungsanleitung

gofanco

gofanco HDwireless10x1 Bedienungsanleitung

gofanco

gofanco CAT5E Bedienungsanleitung

gofanco

gofanco HDwireless100 Bedienungsanleitung

gofanco

gofanco HDMIExt Bedienungsanleitung

gofanco

gofanco HDExt24-HD20 Bedienungsanleitung

gofanco

gofanco HD20wireless Bedienungsanleitung

gofanco

gofanco PRO-HDBaseT-U Bedienungsanleitung

gofanco

gofanco USBCwireless Bedienungsanleitung

gofanco

gofanco HD20Ext-LT Bedienungsanleitung

gofanco

gofanco HDMIExt8P Bedienungsanleitung

gofanco

gofanco HD20Ext4P-LT Bedienungsanleitung

gofanco

gofanco HDBaseT Bedienungsanleitung

gofanco

gofanco HD14Ext-2P Bedienungsanleitung

gofanco

gofanco HDBITT4K22 Bedienungsanleitung

gofanco

gofanco HDBaseT-HD20 Bedienungsanleitung

gofanco

gofanco Prophecy PRO-HDExtIP-TX Bedienungsanleitung

gofanco

gofanco HDExt Bedienungsanleitung

gofanco

gofanco HDwirelessMini Bedienungsanleitung

gofanco

gofanco HDwireless1x4 Bedienungsanleitung

gofanco

gofanco HDbitTv2 Bedienungsanleitung

gofanco

gofanco HDbitT8P Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

gofanco HDbitTPro Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken