Graco Eagle C Series Bedienungsanleitung

308–262

Rev. N

Supersedes Rev. M

First

choice when

quality counts.



INSTRUCTIONS–PARTS

LIST

INSTRUCTIONS

This

manual contains important

warnings and information.

READ AND KEEP FOR REFERENCE.

50:1

TIO DOUBLE ACTING

Eagle

Grease Pump

FOR

LUBRICA

TING PRODUCTS ONL

7500 psi (52 MPa, 517 bar) Maximum Fluid Working Pressure

150 psi (0.9 MPa, 10 bar) Maximum Air Input Pressure

Model 235–888, Series C

lb (16 kg) Pail Size

Model 235–889, Series C

120

lb (55 kg) Drum Size

Model 235–890, Series C

400

lb (180 kg) Drum Size

U.S.

Patent No. 5,147,188

R.O.C New Invention Patent No. 075540

Australian Patent No. 672050

Other Foreign Patents Pending

GRACO INC. P.O. BOX 1441

MINNEAPOLIS, MN

55440–1441

Graco Inc. is registered to I.S. EN ISO 9001

01965A

 

Table

of Contents

Warnings 2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Introduction 5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installation 6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operation 10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting

Chart

12.

. . . . . . . . . . . . . . . . . . . . . . . .

Service 14

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Parts

Drawing

26.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Parts

List

27.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Technical

Data

28.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Dimensions

and Mounting Hole Layout

29.

. . . . . . . . . .

Performance

Charts

30.

. . . . . . . . . . . . . . . . . . . . . . . . . .

Graco

Standard W

arranty 32.

. . . . . . . . . . . . . . . . . . . . .

Graco

Phone Number

32.

. . . . . . . . . . . . . . . . . . . . . . . . .

Symbols

Warning Symbol

WARNING

This

symbol alerts you to the possibility of serious

injury or death if you do not follow the instructions.

Caution Symbol

CAUTION

This

symbol alerts you to the possibility of damage to

or destruction of equipment if you do not follow the

instructions.

WARNING

EQUIPMENT MISUSE HAZARD

Equipment

misuse can cause the equipment to rupture or malfunction and result in serious injury

This equipment is for professional use only

Read all instruction manuals, tags, and labels before operating the equipment.

Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor

Do not alter or modify this equipment.

Check equipment daily

. Repair or replace worn or damaged parts immediately

Do not exceed the maximum working pressure stated on the equipment or in the

echnical Data

for your equipment. Do not exceed the maximum working pressure of the lowest rated component

in your system.

Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the

Tech-

nical Data

section of all equipment manuals. Read the fluid and solvent manufacturer

’

s warnings.

Handle hoses carefully

. Do not pull on hoses to move equipment.

Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose

Graco hoses to temperatures above 66

C (150

F) or below –40

C (–40

_F).

ear hearing protection when operating this equipment.

Do not move or lift pressurized equipment.

Comply with all applicable local, state, and national fire, electrical, and safety regulations.

These pumps are designed to be used only in pumping non-corrosive and non-abrasive lubricants

and greases. Any other use of the pump can cause unsafe operating conditions and component

rupture, which can result in fluid injection or other serious injury

, or fire or explosion.



WARNING

INJECTION HAZARD

Fluid

dispensed from the valve, leaks or ruptured components can inject fluid into your body and

cause extremely serious injury

, including the need for amputation. Fluid splashed in the eyes or on the

skin can also cause serious injury



Fluid injected into the skin might look like just a cut, but it is a serious injury

. Get immediate medi

cal attention.



Do not point the valve at anyone or at any part of the body



Do not put your hand or fingers over the spray nozzle.



Do not stop or deflect leaks with your hand, body

, glove or rag.



Do not “blow back” fluid; this is not an air spray system.



Always have the tip guard and the trigger guard on the gun/valve when dispensing.



Be sure the valve trigger safety operates before dispensing.



Lock the valve trigger safety when you stop dispensing.



Follow the

Pressure Relief Procedure

on page 10 if the nozzle clogs and before cleaning, check

ing or servicing the equipment.

T

ighten all fluid connections before operating the equipment.



Check the hoses, tubes, and couplings daily

. Replace worn, damaged, or loose parts immediately

Permanently coupled hoses cannot be repaired; replace the entire hose.

MOVING

ARTS HAZARD

Moving

parts can pinch or amputate your fingers.



Keep clear of all moving parts when starting or operating the pump.



Before checking or servicing the equipment, follow the

Pressure Relief Procedure

on page 10 to

prevent the equipment from starting unexpectedly

4 308-262

WARNING

FIRE AND EXPLOSION HAZARD

Improper

grounding, poor ventilation, open flames or sparks can cause a hazardous condition and re

sult in a fire or explosion and serious injury



Ground the equipment and the object being dispensed to. Refer to

Grounding

on page 6.



If there is any static sparking or you feel an electric shock while using this equipment,

stop dis-

pensing immediately

Do not use the equipment until you identify and correct the problem.



Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid

being dispensed.



Keep the dispense area free of debris, including solvent, rags, and gasoline.



Do not smoke in the dispense area.



Do not turn on or of

f any light switch in the dispense area while dispensing or while operating if

fumes are present.

TOXIC FLUID HAZARD

Hazardous

fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin,

inhaled, or swallowed.



Know the specific hazards of the fluid you are using.



Store hazardous fluid in an approved container

. Dispose of hazardous fluid according to all local,

state and national guidelines.



The air motor exhausts any fluids added to the input air

, such as oil or antifreeze.



Always wear protective eyewear

, gloves, clothing and respirator as recommended by the fluid and

solvent manufacturer

5308-262

Introduction

WARNING

These pumps area designed to be used only in

pumping non-corrosive and non-abrasive lubricants

and greases. Any other use of the pump can cause

unsafe operating conditions and component rup

ture, which can result in fluid injection or other

serious injury

, or fire or explosion.

NOTE:

Be sure that all operators read and understand

this entire manual and any separate manuals supplied

with components and accessories before using this

equipment.

NOTE:

Reference numbers and letters used in the text

refer to the callouts in the figures and the parts dra

wing.

Terms

WARNING

: Alerts the user to avoid or correct condi

tions that could cause serious injury

CAUTION

Alerts the user to avoid or correct condi

tions that could cause damage to or destroy equip

ment.

NOTE

: Identifies helpful procedures and information.

DISPENSE V

ALVE:

Any fluid dispensing device that

can be triggered on and of

Component Description

This

equipment consists of two major components: the

air motor (1) and the displacement pump (100). See

Fig. 1 . The pump is an in-line design, which means

that the displacement pump screws directly into the

motor

, without the use of tie rods or couplers. The dis

placement pump can be placed directly in the fluid be

ing pumped.

The pump is available in three different lengths, based

on the size of the fluid container

. Refer to the front cov

er for available sizes. The pumps dif

fer only in length;

operation and packings are the same. All three pumps

use Model 235–887 Air Motor

Make sure the muf

fler (36) is securely installed in the

exhaust port (N) before you operate the pump. See

Fig. 1.

CAUTION

Never run the pump without the muf

fler installed.

100

Fig. 1 01965A

N36

 

Installation

NOTE:

Always use Genuine Graco Parts and Acces

sories, available from your Graco distributor

Grounding

WARNING

FIRE AND EXPLOSION HAZARD

Before operating the pump, ground the

system as explained below

. Also read

the section

FIRE OR EXPLOSION

HAZARD

on page 4.

Ground all of this equipment:

Pump:

Use a ground wire and clamp as shown in

Fig. 2. Loosen the grounding lug locknut (W) and

washer (X). Insert one end of a 12 ga (1.5 mm

minimum ground wire (Y) into the slot in lug (Z) and

tighten the locknut securely

. Connect the other end

of the wire to a true earth ground. Order part num

ber 222–01

1 Grounding Clamp and Wire.

Fluid hoses:

Use only grounded fluid hoses.

Air hoses:

Use only grounded air hoses.

Dispensing V

alve:

Obtain grounding through

connection to a properly grounded fluid hose and

pump.

Fluid supply container:

Follow your local code.

Air compressor:

Follow your local code.

o maintain grounding continuity when flushing or

relieving pressure

, hold a metal part of the spray

gun firmly to the side of a grounded

metal

pail, then

trigger the gun.

Fig. 2 06431

7308-262

Installation

The T

ypical Installation shown in Fig. 3 is only a guide for selecting and installing system components and

accessories. Contact your Graco distributor for assistance in designing a system to suit your particular needs.

If you supply your own accessories, be sure they are adequately sized and pressure-rated to meet the system’

requirements. See the

Maximum W

orking Pressure

warning on page 8.

Fig. 3

KEY

APump

BBleed-type

master air valve (required)

Air regulator

Air hose

Air line quick disconnect

Air line filter

Bleed-type master air valve (for accessories)

Main air line

Gun holder

Follow plate

Fluid hose

Dispense valve

Ground wire (required)

01967

Model

235–889 Pump,

shown mounted on movable cart

The

pump intake

should be no more

than 1/2

in. (13 mm)

f the bottom of the

fluid container

 

Installation

Mounting the Pump

1. Select

a convenient location for the equipment, to

ensure easy operator access to the pump air

controls, sufficient room to change supply contain

ers, and a secure mounting platform.

If using a follow plate (K), remove the fluid contain

er cover

. T

o prevent air from being trapped under

the follow plate, scoop grease from the center of

the container to the sides, to make the surface

concave. Place the follow plate on the grease and

push down on the plate until grease appears at the

center opening (P). See Fig 4.

02050

Concave

Surface

Push Down

on Plate

Fig.

Guide the pump intake valve through the cover

and follow plate. Secure the cover to the container

Position the pump (A) so its intake valve is no

more than 1/2 in. (13 mm) from the bottom of the

container

. Mount the pump to the cover or other

suitable mounting device.

WARNING

Mount the pump securely so that it cannot move

around during operation. Failure to do so could

result in personal injury or equipment damage.

System Accessories

WARNING

Maximum

orking Pressure

The maximum working pressure of each compo

nent in your system may not be the same. T

reduce the risk of overpressurizing any part of your

system, be sure you know the maximum working

pressure rating of each component. Never exceed

the maximum working pressure of the lowest rated

component connected to a pump. Use the following

table to limit the air to the pump so that no air line

or fluid line component or accessory is overpres

surized.

Approximate

Air Inlet Pressure

Fluid Outlet Pressure

psi (MPa, bar) psi (MPa, bar)

40 (0.28, 2.8) 2000 (14, 140)

60 (0.42, 4.2) 3000 (21, 210)

80 (0.56, 5.6) 4000 (28, 280)

100 (0.7, 7.0) 5000 (35, 350)

120 (0.84, 8.4) 6000 (42, 420)

140 (0.98, 9.8) 7000 (49, 490)

150 (0.9, 10)

7500 (52, 517)



Installation

WARNING

A bleed-type master air valve is required in your

system to help reduce the risk of serious injury

including splashing in the eyes or on the skin, and

injury from moving parts if you are adjusting or

repairing the pump.

The bleed-type master air valve relieves air trapped

between this valve and the pump after the air is

shut of

f. T

rapped air can cause the pump to cycle

unexpectedly

. Locate the valve close to the pump.

Install a bleed-type master air valve (B), to relieve

air trapped between the valve and the motor

. See

the

ARNING

above).

Install an air regulator (C), to control the pump

speed and pressure.

Install an air line filter (F) to remove harmful dirt

and moisture from the compressed air supply

Install a second bleed-type master air valve (G)

upstream from all other accessories, to isolate the

accessories for servicing.

Connect the fluid hose (L) to the dispense

valve (M). Use a gun holder (J) to hold the dis

pense valve when not in use.

For ease in connecting the air line to the pump,

use an air line quick disconnect (E) at the pump air

inlet.

Connect the air (D) and fluid hoses (L) to the pump

(A). Use only grounded fluid and air hoses. Be

sure all hoses are properly sized and pressure-

rated for your system.

NOTE:

Additional air line lubrication is not required to

extend the Eagle



grease pump air motor life. The air

motor is prelubed at the factory and should not require

additional lubrication between maintenance schedules.

No accessory air line lubricator should be installed.

10 308-262

Operation

Pressure Relief Procedure

WARNING

INJECTION

HAZARD

Fluid under high pressure can be in

jected through the skin and cause seri

ous injury

. T

o reduce the risk of an injury

from injection, splashing fluid, or moving parts, fol

low the

Pressure Relief Procedure

whenever you



Are instructed to relieve the pressure



Stop dispensing



Check or service any of the system equipment



Install or clean the spray tips/nozzles

Close the pump air regulator

Close the bleed-type master air valve (required in

your system).

Hold a metal part of the dispensing valve firmly to

the side of a metal waste container

, and trigger the

valve to relieve fluid pressure.

If you suspect that the spray tip or hose is completely

clogged, or that pressure has not been fully relieved

after following the steps above,

very slowly

loosen the

tip guard retaining nut or hose end coupling and relieve

pressure gradually

, then loosen completely; then clear

the tip or hose.

Flushing

The pump is tested with lightweight oil, which is left in

to protect the pump parts. If the fluid you are using

may be contaminated by the oil, flush it out with a

compatible solvent before using the pump.

WARNING

For your safety

, read the warning section

FIRE AND EXPLOSION HAZARD

page 4 before flushing, and follow all

the recommendations given there.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Graco Wasserpumpe Handbücher

Graco

Graco G3 Pro Bedienungsanleitung

Graco

Graco Husky 515 series Bedienungsanleitung

Graco

Graco Husky 1050HP Bedienungsanleitung

Graco

Graco BLUE DEVIL 260000 Bedienungsanleitung

Graco

Graco SaniForce 1040e Bedienungsanleitung

Graco

Graco SoloTech Gebrauchs- und Pflegehandbuch

Graco

Graco 232200 Bedienungsanleitung

Graco

Graco Husky 2200 Gebrauchs- und Pflegehandbuch

Graco

Graco 223777 Bedienungsanleitung

Graco

Graco Dura-Flo 1200 Bulldog 237-516 Bedienungsanleitung

Graco

Graco Series A Bedienungsanleitung

Graco

Graco Bulldog 245185 Bedienungsanleitung

Graco

Graco Dura-Flo 1800 Series Bedienungsanleitung

Graco

Graco Z-Pump Elite Series Bedienungsanleitung

Graco

Graco E-Flo Plus Bedienungsanleitung

Graco

Graco E-Flo 4000 Bedienungsanleitung

Graco

Graco HYDRA-CLEAN C Series Bedienungsanleitung

Graco

Graco Bulldog 221-104 Bedienungsanleitung

Graco

Graco SaniForce BES Series Bedienungsanleitung

Graco

Graco ToughTek F340e Gebrauchs- und Pflegehandbuch

Graco

Graco Hydra-Cat H.P. Series Bedienungsanleitung

Graco

Graco SaniForce Stücklistenhandbuch

Graco

Graco 241407 Bedienungsanleitung

Graco

Graco ChemSafe 1590 Stücklistenhandbuch

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung

GÜDE

GÜDE HWW 900 GC Bedienungsanleitung