Grandstream Networks GXE502X Bedienungsanleitung

Grandstream GXE502x IPPBX

Quick Start Guide

GXE 502X Quick Start Guide 10/25/07

Page 2

Grandstream GXE502x IPPBX Quick Start Guide

This Quick Start Guide will quickly take you through the necessary steps to set up

your Grandstream GXE502x. For advanced configuration instructions please consult

the GXE user manual after completing the steps in this guide.

Check your GXE502x packaging:

•GXE502x unit

•Ethernet cable

•12V DC power adapter

Note: Before configuring your GXE please go to

http://www.grandstream.com/BETATEST for the newest

firmware releases, voice prompts and updated GXE

documentation.

System Set-up Prerequisites:

•Compatible PC (to access web GUI)

•Ready access to power and UPS or surge protector

•DHCP must be configured with DHCP Option 66 enabled for Grandstream

phones to be autoprovisioned (Grandstream default configuration. Non-

Grandstream IP phones will need to be configured manually).

Switch/Hub: network device used to share network

connections

PSTN Line: traditional analog POTS line

DHCP: dynamic host configuration protocol – automatically

assigns IP addresses

Extension Length: number of characters in an extension. For

example: ext 803 has an extension length of 3.

Connecting the GXE502x:

1. Connect one end of an RJ-45 Ethernet cable into the LAN port of the GXE.

2. Connect the other end of the Ethernet cable into the uplink port of an

Ethernet switch/hub.

The GXE will be the router for this network, and will serve as a DHCP server as

well. However, do not connect phones and other SIP devices to the switch/hub

at this point; they will need to be connected later to be auto-provisioned.

3. Connect the 12V DC power adapter into the 12V DC power jack on the back

of the GXE. Insert the main plug of the power adapter into a surge-

protected power outlet.

4. Let the GXE boot up for the first time. You will know it is finished with the

boot process when the “READY” LED is solid green.

5. Connect PSTN lines from the wall jack to the FXO ports, and analog lines

(phone and fax) to the FXS ports. IP phones will be connected in a later

step.

FXO ports (connect PSTN

lines here)

FXS Ports (connect

analog lines here)

12V DC

Power Jack

Audio

In/Out

USB Port

LAN Port (connect

RJ45 cable here)

WAN Port (connect to

the internet here)

GXE 502X Quick Start Guide 10/25/07

Page 3

GXE Configuration Steps

ONE. Access the web GUI (web configuration pages):

1. Connect a Windows PC to the same switch/hub that is connected to the GXE.

2. Click on the start menu and go to the “Run” option and type “cmd” to launch

the Windows command prompt window.

3. Enter the following commands in the prompt window: ipconfig /release

followed by ipconfig/renew. Press the enter button on your keyboard to run

each command.

4. Open up a web browser of your choice (Microsoft Internet Explorer 7

recommended).

5. Type the default GXE LAN port IP address in the URL field: 192.168.10.1 and

press the Enter key and the GXE web configuration login screen will load

immediately. (See Figure 1-1)

6. The default login name and password are both “admin.”

7. After logging in, the GXE web configuration interface (web GUI) will appear.

Figure 1-1

Note: All GUI screenshots are examples, do not

copy these configurations into your GXE.

TWO: Set-up Wizard (Express Setup):

The set-up wizard is pre-configured with basic call settings that enable you to quickly

configure your GXE. Use this wizard to begin making calls immediately and to

understand the basic configuration set-up. Note: The Express Setup Feature can

only be run when the GXE is at the factory default settings.

1. Click on the yellow Express Setup link at the left of the menu bar to load the

Express Setup screen (See an example in Figure 2-1). This page lets you

define the length of your extensions as well as the extension prefix and the

identifier for your office (IP-PBX #).

2. Click “Next” to bring up the Automatic Extensions Provisioning page (See

Figure 2-2 on the next page). This page shows a list of the default

extension numbers for various key GXE extensions. Please ensure that the

extension length and extension digit prefix matches the values set in the

previous Express Setup page.

Figure 2-1

GXE 502X Quick Start Guide 10/25/07

Page 4

3. Click on the button labeled: “Start Auto Provisioning” (See Figure 2-2). Once

the Automatic Extensions Provisioning screen loads (See Figure 2-3), the

GXE will begin finding devices by waiting for them to communicate via DHCP.

At this point, please start connecting all SIP devices/phones into the

switch/hub. The page will keep refreshing as the GXE looks for new devices.

In addition, your SIP devices/phones need to have DHCP enabled as well as have

DHCP Option 66 allowed to be auto-provisioned; these are factory default settings

on Grandstream products as well as many others.

Figure 2-2

To ensure proper auto-provisioning of Grandstream IP phones, connect the IP phones

to the switch/hub after Step 3, as the GXE will only auto-provision phones found

during this stage.

Figure 2-3

4. As the SIP devices/phones are auto-provisioned, the “Number of extensions

provisioned” counter will increment to inform you of the auto-provisioning

progress. Press the “Stop Auto Provisioning and Done” button when all

devices are configured (See Figure 2-3). The Extensions Directory page will

load automatically (See Figure 2-4). This will show you the default operator

extension and all devices found during the Auto Provisioning step.

5. You are now ready to make phone calls locally!! Try to make calls between

your extensions.

6. To make a call pick up the receiver and dial the extension and press the send

button or #.

Figure 2-4

GXE 502X Quick Start Guide 10/25/07

Page 5

THREE: Manually Adding Extensions

1. If you need to add more extensions manually, you can click on “Add One

Extension” or “Batch Add” to add multiple extensions at a time. Choosing “Add

One Extension” will load the “Add Extension page” (See Figure 3-1); enter a

User Name, Extension, and SIP Password. You may set any of the other

optional settings as you wish, then click the “Submit” button when done.

2. Next you will need to log into the web interface of the phone to be added by

typing the IP address of the phone in your web browser.

3. Type in “admin” for the password on the phone’s login screen.

4. When you are logged in, the advanced settings page will load automatically.

5. Click on the Account 1 page of your phone to load the account configuration

page (See Figure 3-2) and enter the 192.168.10.1 as the SIP Server.

6. Enter the corresponding information from the GXE’s “Add Extension” page for

SIP User ID (The Extension #), Authenticate ID (The Extension#) and

Authenticate password (SIP Password).

7. Scroll to the bottom of the account configuration page and click the “update”

button. After the next page loads, click on the “reboot” button.

7. Congratulations, you have manually added an extension to your GXE!

Figure 3-1

Figure 3-2

GXE 502X Quick Start Guide 10/25/07

Page 6

FOUR: Configuring the Network Settings

1. Click on “System Configuration” in the left hand column. This will

automatically load the Network Settings configuration page (See Figure 4-1).

On this page you can configure the LAN and WAN settings such toggling

between using DHCP or using a static IP address. You may choose to simply

use the default setting values, or customize them if necessary.

2. The default LAN Base IP is 192.168.10.1/255.255.255.0. If you wish to use a

different internal IP addressing scheme, please change it before running the

express setup as the GXE will auto-provision the LAN Base IP into the phones

for them to communicate with the GXE. Reboot the GXE before proceeding to

the next step to make the LAN Base IP setting change take effect.

Warning: Do NOT change the LAN Base IP after auto-provisioning phones

after the express setup, this will break the connection between your

configured phones and the GXE.

Figure 4-1

GXE 502X Quick Start Guide 10/25/07

Page 7

FIVE: Configuring the System Settings

1. Click on “System Configuration” in the menu bar on the left.

2. Click on “System Settings” in the expanded menu to load the system settings

page (See Figure 5-1). This page lets you configure the login and contact

information of the system administrator, email options, time zones, call record

servers and storage quotas.

3. For better security, please change the web configuration password by entering

your own password in the “Login Password” field. Keep this password safe

and do not lose it.

4. To enable the voicemail-to-email feature, please create a new email address

or use an existing one.

5. Enter the email account SMTP Server, Login Name, Login Password, and Email

Address settings in the corresponding fields; you may obtain this information

from your email provider.

6. Click on the “Submit” button to save your changes.

Figure 5-1

GXE 502X Quick Start Guide 10/25/07

Page 8

SIX: Configuring PSTN Lines (if available)

1. Click on TRUNK/Phone Lines on the left menu bar to load the Internal PSTN

Trunk Line configuration page (See Figure 6-1).

2. All sections on this page except for the Line Call Control section are used to

match the settings of the GXE to the local PSTN line parameters. The

default settings should work in most cases; you may check with your PSTN

service provider if your line parameters differ so that these settings may be

adjusted accordingly.

3. Scroll down to the bottom of the page to view the “Line Call Control”

Settings (Figure 6-2). To direct all incoming PSTN calls on all lines to an

operator, for example, first enter “1-8” in the Line field.

4. In the Inbound Call Answer drop-down box, choose “Direct Extension.” In

the drop-down box to the right, choose the extension number of the

operator.

Figure 6-1

5. Set the Dial Prefix field to the prefix used to for outgoing PSTN calls; for

example, “9” is commonly used.

Note: This section is very important as it configures how all incoming calls are

handled on the FXO lines. For example you could have all incoming calls go to the

auto-attendant for one line and add a dial pre-fix for another.

Figure 6-2

GXE 502X Quick Start Guide 10/25/07

Page 9

SEVEN: Configuring SIP Trunks (if available)

1. Click on TRUNK/Phone Lines on the left menu bar and then click on “SIP

Trunk” to load the SIP Trunk configuration page (Figure 7-1).

2. Your SIP service provider will provide you with SIP account and registration

information, which you may enter in the respective fields of this page.

3. Set the “Trunk Active” setting to “Enable” to enable this trunk on your GXE.

You may also specify an arbitrary name for this trunk in the “Trunk Name”

field, as well as one for the SIP account in the “Account Name” field.

4. To set a limit on the number of calls allowed through this trunk, please set

the “Max Concurrent Calls Allowed” field to the limit allowed by your service

provider, or a lower number if you wish.

5. Set the dial digit prefix which users will prefix outbound numbers with to

specify this trunk to be used.

6. Lastly, use the “Inbound Call Answer” setting to specify the inbound call

destination, such as “auto-attendant”.

Figure 7-1

EIGHT: Configuring a Peer System (if available)

1. If you have more than one GXE502x, you can configure the units to be

peers. To do this, click on “Advanced Options” in the menu bar to load the

“Peer Systems” page.

2. Click the “Add” button to load the “Add Peer System” Page (Figure 8-1).

This page lets you enter configuration data for the remote GXE you are

adding as a peer system.

3. In the Peer URL field, enter the IP address or domain name of the peer

GXE. Assign a number to the Trunk Number parameter to set the # of

concurrent calls possible on the peer system.

4. Set the extension prefix of the remote PBX extensions in the Prefix field.

The GXE will route calls starting with this prefix to the peer system.

5. Assign a number to this peer system in the IPPBX Number field.

6. If the peer system is another GXE, set the Heart Beat setting to “Yes.”

Otherwise, use “No.”

7. Reboot the GXE so the configuration changes can take effect.

Figure 8-1

Andere Handbücher für GXE502X

Andere Grandstream Networks Telefonanlage Handbücher

Grandstream Networks

Grandstream Networks UCM6510 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6510 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6202 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6510 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6102 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6200 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6102 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6 series Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM630X Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXE502X Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6304 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6102 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6100 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6510 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6104 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6200 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6 series Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6102 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6100 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks GXE502X Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6 series Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6200 Series Bedienungsanleitung

Grandstream Networks

Grandstream Networks DP715 Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM P800 Bedienungsanleitung

Beliebte Telefonanlage Handbücher anderer Marken

Allo.com

Allo.com Nano 2 Bedienungsanleitung

ZYCOD

ZYCOD ZX50 Bedienungsanleitung

Panasonic

Panasonic KX-TDA100BX Bedienungsanleitung

LV switch

LV switch IPPBX800 Gebrauchsanweisung

Edge-Core

Edge-Core VST3305 Bedienungsanleitung

Panasonic

Panasonic KX-T7625 - Digital Proprietary Speakerphone 24... Bedienungsanleitung

Rauland-Borg

Rauland-Borg Telecenter IV Bedienungsanleitung

ATCOM

ATCOM IPPBX IP02 Bedienungsanleitung

Panasonic

Panasonic KX-TVS50 - 2 Port Voicemail System Bedienungsanleitung

bintec elmeg

bintec elmeg elmeg hybird 600 Bedienungsanleitung

Panasonic

Panasonic KX-NS300 Bedienungsanleitung

MCK

MCK EXTender PBXgateway Bedienungsanleitung

Panasonic

Panasonic KX-NS300CN Betriebsanleitung

NEC

NEC SL1000 Bedienungsanleitung

Epygi

Epygi Quadro Quadro 2xi Bedienungsanleitung

SMC Networks

SMC Networks TigerVoIP SMCPBX10 Bedienungsanleitung

AGFEO

AGFEO AC 14 analog Bedienungsanleitung

Nortel

Nortel QSY22 Bedienungsanleitung