Grandview LF-PP series Bedienungsanleitung

Model：LF-PPxx

GRANDVIEW REPRODUCING GENUINE COLORS

Thank you for purchasing a Grandview projection screen.

Before use, please read instructions carefully. After installation, store instructions for future reference.

Installation Guide for

Large-flat Series Ultimate Permanent Cinema Screen

GRANDVIEW REPRODUCING GENUINE COLORS

ISO9001:2000

International Certification

Grandview Crystal Screen Canada Ltd.

#11- 3751 North Fraser Way,

Marine Way Business Centre,

Burnaby, BC, Canada V5J 5G4

Tel: 1-604-412-9777 Fax: 1-604-412-9796

Website: www.grandviewscreen.ca

Guangzhou Grandview Crystal Screen Co., Ltd.

P.O. 511400 Federal Ind. Zone No. 363, Yushan West Road,

Shiqiao, Panyu District, Guangzhou, Guangdong, China

Tel: +8620-8489-9499 Fax: +8620-8480-3343

Website: www.grandviewscreen.com

www.grandviewscreen.com.cn

Description

Accessories

Top and Bottom Tension Bars (2 )pcs Side Tension Bars (2 )pcs

Top and Bottom Frame Pieces (2pcs)

Side Frame Pieces (2 )pcs

Fixing Lu gs

Instruction Manual(1 )pc

Corner Bra cke ts Scr ews (4 )pcs

Brackets

Side Frame Pieces

Top and Bottom Frame Pieces

Fabric

Additional Sheet (Total Fixing Lugs Quantities)

5x40 mm Screws with

Anchors (8, not included)

5x10mm Screws (8 )pcs

Fixing Lug

Brackets

※：Two More Fixing Lugs For Each Screen

100

106

120

4:3

16:9

150 180 200

\32

Qty

Format

pcs

\ \

1. Take out frame from box and lay on flat surface ( 3). Take out all additional parts.Figure

2. Slide fixing lugs into grooves on reverse side of frame ( 4&5) and align with arrows (Note: Arrows

are approximate).

Figure

3. Loosen corner bracket screws and slide into frame grooves. Carefully align frame corner to 90 degrees

and fasten with screws. Repeat for each corner (Figure 6-7).

This projection screen should be installed at the best possible viewing position for the audience. Front

projection (Figure 1) and Rear projection (Figure 2). Install according to material chosen.

Installation

Figure 3

Side Frame Pieces

Top and Bottom Frame Pieces

Figure 4 Figure 5

Fixing Lugs

Aluminum corner

connector piece

Side Frame Pieces

Top and Bottom

Frame Pieces

Figure 6 Figure 7

Figure 1Figure 2

Ignoring the safety warnings may

lead to injuries and/or damaging

the product.

Fixtures should be installed in a secure

place to avoid accidents or the screen

falling.

Please contact your local dealer for

repairs or maintenance. Please contact

our company if you have any further

questions. Avoid taking apart the

fixtures yourself. Loose parts may

cause the screen to fall.

Warnings

Do not take apart and replace with unknown parts. If there are any problems, please contact your local dealer.

Product specifications are subject to change.

When installing, make sure it is facing forward. The back of the screen will be labeled with a sticker.

Please read the following as any damage to the screen surface will affect the quality of the picture:

1.The frame is made with lightweight aluminum. Please handle with care.

2.Avoid contact or touching the screen surface as it may cause scratches or tears.

3.Do not write or draw on the surface.

4.Clean the screen with a soft cloth and lukewarm water. Do not use any detergent or cleaning products.

5.Use a cotton cloth to carefully wipe off the dust on the frame to prevent any damages

6.If it is not in use for a long period of time, cover the screen to shut out dust and dirt.

To prevent unnecessary damage, the operating and maintenance of the screen should be done by adults.

Opening the case, the frame has indentations on surface because of packaging in a dry case for a long

time. This is a normal phenomenon and the screen can be used normally. Please stay the screen in a

normal condition that the indentations can be naturally removed. Recovery time will be changed in 1-15

days because of the air humidity, If you want to remove these indentations quickly, please use half-wet

solution.

Methods: Sprinkle water on the surface that can remove the indentations.

4. Unfold screen fabric and insert tension bars. Use the long bar for the top & bottom and the short bar

for sides. Be careful not to poke the fabric (Figure 8-10).

5. Align fixing lugs with arrows. Using the tension bar, pull fabric eyelets over fixing lugs. Do top side

first then rotate clockwise (Figure 11-15).

6. Adjust screen to ensure that it is flat and smooth.

7. Align brackets to desired width and measure. Drill two, or four holes (If using 4 brackets) in wall at

measured width. Insert 5x40mm screws for studded wall, or 5x40mm screws + anchors for drywall

without studs and hang (Figure 16-17).

Figure9Figure10

Figure8

6mm Tension Bars

Figure14 Figure15Figure13

Figure11 Figure12

Figure16 Figure17

8. Insert 6x12mm screws to fasten the brackets to the top and bottom frames. 9(Figure 18-1 )

Figure18

Figure19

Andere Grandview Projektionsfläche Handbücher

Grandview

Grandview CB-Mxx Bedienungsanleitung

Grandview

Grandview Portable X-Press Series Bedienungsanleitung

Grandview

Grandview PE-Y (R7)15 Series Bedienungsanleitung

Grandview

Grandview FC-FH-MF II Series Bedienungsanleitung

Grandview

Grandview Edge R3 PE-L Series Bedienungsanleitung

Grandview

Grandview FC-FH-MI II Series Bedienungsanleitung

Grandview

Grandview Legacy Series Bedienungsanleitung

Grandview

Grandview Ultimate PP-G Series Bedienungsanleitung

Grandview

Grandview Motorised Rising Screen Bedienungsanleitung

Grandview

Grandview Dynamique R3 Bedienungsanleitung

Grandview

Grandview Pull Up Portable Screen Bedienungsanleitung

Grandview

Grandview CB-MIRC Bedienungsanleitung

Grandview

Grandview Tripod Bedienungsanleitung

Grandview

Grandview Fantasy Series FA-Mxx Bedienungsanleitung

Grandview

Grandview EL-Pxx Bedienungsanleitung

Grandview

Grandview Large-flat Series Bedienungsanleitung

Grandview

Grandview Edge R1 Series Bedienungsanleitung

Grandview

Grandview Smart Screen Bedienungsanleitung

Grandview

Grandview SkyShow Series Bedienungsanleitung

Grandview

Grandview GVFA100V Bedienungsanleitung

Grandview

Grandview Fantasy FC-FHMI Series Bedienungsanleitung

Grandview

Grandview CB-Pxx Bedienungsanleitung

Grandview

Grandview GRUC040V Bedienungsanleitung

Grandview

Grandview Pull Up Bedienungsanleitung

Beliebte Projektionsfläche Handbücher anderer Marken

FART PRODUKT

FART PRODUKT Standard SCREEN Bedienungsanleitung

Draper

Draper E Series Handbuch

Elite Screens

Elite Screens Elite Tripod Series Bedienungsanleitung

Laarhoven

Laarhoven Companion II Bedienungsanleitung

Renogy

Renogy RMS-LFPS-US Bedienungsanleitung

Da-Lite

Da-Lite ExecutiveElectrol Bedienungsanleitung

Samsung

Samsung S*H65* Bedienungsanleitung

FONESTAR

FONESTAR PPTR-43100-FA Bedienungsanleitung

Slide Clear

Slide Clear Varro XL Bedienungsanleitung

Elite Screens

Elite Screens M85XWS1-SRM Bedienungsanleitung

OS РХ-090Н Bedienungsanleitung

Niko

Niko 10-845 Bedienungsanleitung

Speaka Professional

Speaka Professional 2357532 Betriebsanleitung

Sima

Sima XL-72 Bedienungsanleitung

Jasic

Jasic EVO 2.0 ET-200P Bedienungsanleitung

Elite Screens

Elite Screens Starling 2 Series Bedienungsanleitung

InFocus

InFocus SC-WALL GRY-92H Handbuch

Barco

Barco OverView MVL-615 Bedienungsanleitung