GRAPHTEC Data Platform GL7000 Bedienungsanleitung

DATA PLATFORM

GL7000　Quick Start Guide

GL7000-UM-855

Thank you for purchasing Graphtec DATA PLATFORM GL7000. The Quick Start

Guide is to assist you with the basic operations. For detailed instructions, please

refer to the instruction manual on the CD-ROM (PDF format) enclosed.

Check the outer casing rst

Check the exterior of the unit to ensure that there are no cracks, defects or

any other damages before use.

Accessories

・Alarm Module: 1

・Quick start guide: 1

・CD-ROM: 1

・Face cover: 1

・AC power cord : 1

Setting and conrming the AC line frequency

(When using Voltage/Temperature Module(GL7-M)

In OTHER menu, set AC line frequency to (50Hz or 60Hz) to reduce noise

level.

Table of Contents

1.GL7000 operating guide .....................................................................................................................................................4

1-1. CE marked equipment guide ...............................................................................................................................4

1-2. Location recommendation ...................................................................................................................................4

1-3. Warning for maximum input voltage ....................................................................................................................4

1-4. Warning for module installation/removal..............................................................................................................4

1-5. Installation space recommendation .....................................................................................................................4

1-6. Warm-up..............................................................................................................................................................4

2.Part Names .........................................................................................................................................................................5

2-1. Front view ............................................................................................................................................................5

2-2. Side view .............................................................................................................................................................5

2-3. Voltage Module (optional)....................................................................................................................................6

2-4. Display Module (optional) ....................................................................................................................................6

2-5. SSD Module (optional).........................................................................................................................................6

3.Set-up position ....................................................................................................................................................................7

3-1. Standard main module only.................................................................................................................................7

3-2. Installing the Display Module (optional)...............................................................................................................7

4.How to power the GL7000 ..................................................................................................................................................8

4-1. Connecting the AC power cord............................................................................................................................8

4-2. Connecting to the GND terminal..........................................................................................................................8

5.How to install the modules to the GL7000 ..........................................................................................................................9

6.GL-Connection software ...................................................................................................................................................10

6-1. Necessary requirements....................................................................................................................................10

6-2. Installing the USB driver ....................................................................................................................................10

6-3. Installing the GL-Connection .............................................................................................................................10

6-4. Connecting GL7000 and PC..............................................................................................................................11

6-5. GL7000 Interface Settings.................................................................................................................................11

6-5-1. USB connection .......................................................................................................................................11

6-5-2. LAN connection .......................................................................................................................................11

6-6. Starting the GL-Connection ...............................................................................................................................12

6-7. Connecting the GL-Connection .........................................................................................................................13

6-7-1. To connect ...............................................................................................................................................13

6-7-2. To disconnect ..........................................................................................................................................13

6-8. Description of MAIN screen in GL-Connection..................................................................................................14

6-9. SETTING screen in GL-Connection ..................................................................................................................15

6-9-1. Main menu ...............................................................................................................................................15

6-9-2. Setting the amplifier .................................................................................................................................15

6-9-3. Changing the Data settings .....................................................................................................................15

6-10. Recording with GL-Connection software .........................................................................................................16

6-10-1. Record start button ................................................................................................................................16

6-10-2. Compressed file.....................................................................................................................................16

6-10-3. Status display ........................................................................................................................................16

6-10-4. Playback of data file during recording...................................................................................................16

6-11. To Stop GL-Connection...................................................................................................................................16

6-12. Replay on GL-Connection ...............................................................................................................................17

7.Display Module (GL7-DISP)..............................................................................................................................................18

7-1. Screen operating instructions ...........................................................................................................................18

7-2. Touch-screen operations..................................................................................................................................19

7-2-1. Pressing a button.....................................................................................................................................19

7-2-2. Selecting an item .....................................................................................................................................19

7-2-3. Moving the slide bar.................................................................................................................................19

7-3. Description of the operation keys ......................................................................................................................20

7-4. Description of the HOME screen .......................................................................................................................21

8.Specifications....................................................................................................................................................................22

8-1. Standard specifications......................................................................................................................................22

8-2. External input/output function ............................................................................................................................22

1. GL7000 operating guide

1-1. CE marked equipment guide

GL7000 conforms to the EN61326-1 Class A based on the EMC Directive (2014/30/EU)Additionally, it

conforms to the EN61010-1:2010 3rd based on the LV Directive (2014/35/EU). The instrument meets

both the standards. When operating the instrument, follow the safety guide in the instructions manual

(PDF) found on the attached CD-ROM. To avoid possible damage or injury due to mishandling of the

instrument, please follow the operating safety guide and ensure correct usage of the equipment.

1-2. Location recommendation

Do not use GL7000 in locations noted below.

・Avoid places with high temperatures or high humidity, as in direct sunlight or near heaters.

・

Avoid environment with salty air, corrosive gas, as well as places with an organic solvent in the

atmosphere.

・

Avoid places with possible surge in voltage and jamming, as lightning and near electrical furnaces.

・

Avoid places with lots of dust.

・

Avoid places with vibrations and shocks.

1-3. Warning for maximum input voltage

Every Amplier Module has a specied maximum voltage input, do not input voltage levels exceeding

the specied value at any moment. For details, see the instructions attached with each module.

1-4. Warning for module installation/removal

For every module, execute installations/removals while GL7000 is turned off (power distribution OFF).

1-5. Installation space recommendation

The instrument is equipped with ventilators and exhaust vents for cooling fan. Do not block the vents

and give allowance for installment space as shown in the chart below.

30mm or more

200 mm or more

30 mm or more

200 mm or more

1-6. Warm-up

GL7000 requires approximately 30 minutes to warm-up in order to deliver the optimum performance.

This is especially true if temperature is being measured.

2. Part Names

2-1. Front view

Alarm Module

Alarm output terminals

Synchronous connection terminal

REMOTE terminal

LAN I/F terminal

USB I/F terminal

SD card slot

Action status LED

　・POWER

　・START

　・ACCESS

Power switch

Main Module

Monitor out connector

2-2. Side view

GND terminal

Name plate

AC power connector

Cooling fan

Available optional modules.

2-3. Voltage Module (optional)

Module connector

Power LED

Analog signal input terminal

Cooling fan

2-4. Display Module (optional)

Monitor

Operation key Module connector

(For direct connection)

Monitor connector (For connecting cable)

2-5. SSD Module (optional)

Cooling fan

Module connector

Access lamp

3. Set-up position

To use GL7000, use it in an upright position as shown below.

3-1. Standard main module only

3-2. Installing the Display Module (optional)

For details on installing the optional Display Module, see the instruction manual for the Module.

* Use a commercially available LAN cable for connecting the display module to the main unit(straight,

CAT5 or above, cable length 10m or less)

4. How to power the GL7000

4-1. Connecting the AC power cord

Insert the AC power cable into the GL7000 and the other end into an electrical outlet.

*AC power cord may differ depending on your country designation.

4-2. Connecting to the GND terminal

Use the GND terminal when the power cord cannot be grounded and when the GND level is shared

with other equipment. For details on the GND terminal, see the “Safety Precautions” of the instruction

manual (PDF format) on the attached CD-ROM.

GND terminal

Ground wire

* In order to prevent an electric shock and a re, please ground the instrument using a GND terminal.

For grounding, use a ground wire with a diameter of at least 0.75 mm².

5. How to install the modules to the GL7000

To measure with GL7000 requires installation of Amplier Module sold separately.

Example: This section describes the direction to install a Voltage Amplier Module as an example. (For

other Amplier Modules, see the instructions attached with the each module.)

1) Remove the xed screws (2 each from the top

and the bottom of the unit), place the Alarm

Module parallel to the GL7000 and slide it

in the direction of the arrow to remove the

module.

2) Remove the xed screws from the side of the

Amplier Module. (2 places on the chart below)

3) Slide the Amplier Module parallel to the

GL7000 and connect.

4) In the same manner, return the Alarm Module and

attach to the end and fasten the center down with

screws. (Recommended tightening torque: 4kgf/

cm). Tighten the upper screws rst then the lower

screws.

* When installing multiple modules, install one at a time. Make sure to fasten with screws before

installing the next module.

GL7000 offers wide variety of measuring objects by adding ampier modules to the instruments.

A maximum of 10 Amplier Modules can be added, up to112ch possible channels. The Logic/Pulse

can be selected individually for each module (16ch/module).

The maximum use of the Logic function is 7 modules (112ch).

The maximum use of the Pulse function is 2 modules (32ch).

The maximum connection of every type of Amplier Module is 10 modules (112ch maximum).

For external memory installation, an SD card slot (SDHC equivalent, maximum approx.

32GB) is included as standard equipment (* SD cards not provided by Graphtec). An SSD

128GB is available as an option. (However, 1 le cannot exceed 4GB)

6. GL-Connection software

The GL-Connection is a PC software for managing and measuring on the GL7000.

The GL-Connection (included as standard) will do the following:

・

Operate the GL7000 (settings reference, recording start, recording stop etc.)

・

Record real time data (Real time data recording is possible at 1 ms at the fastest). *

・

Plays back recorded data

Following information lists the basic parts of the GL-Connection. For details,

see the GL-Connection instructions on the CD-ROM.

6-1. Necessary requirements

To install the software, use a PC that satises the conditions mentioned below.

・

OS: Windows 7 (32/64bit) (* Starter Edition is not supported)

Windows 8 / 8.1 (32/64bit)

Windows 10 (32/64bit)

・

CPU: Intel Core 2 Duo or higher is recinnebded

・

Memory: 1GB or higher is recommended

・

HDD: 32GB of empty hard drive space is needed to install the software.

・

Display: 800x600 resolution or above, 65,535 colors or more (16-bit or above)

・

Other: CD-ROM drive (when installing from CD), USB port and LAN port are required

6-2. Installing the USB driver

When connecting the instrument to a PC via USB, a USB

driver must be installed on the PC. By selecting the automatic

program “USB Driver Install” on the attached CD-ROM, the

USB driver installation will start. For details, see the “Read the

USB driver installation

instructions” in the instructions.

Installing the USB driver

Read the instruction manual

for installing the driver

6-3. Installing the GL-Connection

This link guides how to install the GL-Connection application software.

By selecting the automatic program “GL-Connection Install” on

the attached CD-ROM, the GL-Connection will launch and the

installation will start. Follow the instructions and continue with

the installation. Installing GL-Connection

Andere Handbücher für Data Platform GL7000

Inhaltsverzeichnis

Andere GRAPHTEC Andere Handbücher

GRAPHTEC

GRAPHTEC midi LOGGER GL240 Bedienungsanleitung

GRAPHTEC

GRAPHTEC GL840 Fehlerbehebungshandbuch

GRAPHTEC

GRAPHTEC GL840 Bedienungsanleitung

GRAPHTEC

GRAPHTEC midi LOGGER GL220 Bedienungsanleitung

Beliebte Andere Handbücher anderer Marken

GO Industries

GO Industries 38017 Bedienungsanleitung

Cissell

Cissell 30LBCMAN2 Bedienungsanleitung

RIDGID

RIDGID K-60SP Bedienungsanleitung

Gage Bilt

Gage Bilt GB751SH-5 Bedienungsanleitung

OVE

OVE SIERRA 60 Bedienungsanleitung

ReelCraft

ReelCraft 7800 OLB21 Bedienungsanleitung

Body Armor 4x4

Body Armor 4x4 ECO-SERIES Bedienungsanleitung

ROBLIN

ROBLIN DROP Benutzerhandbuch

EMG

EMG EMG-ACB BARREL Service-Handbuch

MiniSolar

MiniSolar MT-150 Bedienungsanleitung

Parkside

Parkside PSZ 250 B2 Bedienungsanleitung

ABB

ABB REM 610 Produkthandbuch

Parkside

Parkside 55992 Betriebsanleitung

Skyjacker

Skyjacker F250 Bedienungsanleitung

IBM

IBM IBM SYSTEM Z Installationsanleitung

Grech Motors

Grech Motors G28 Bedienungsanleitung

NOVAK

NOVAK BATTERY CARE SHEET Leitfaden

Telemotive

Telemotive blue PiraT Mini Benutzerhandbuch