GREAT PLAINS Qualidisc HS2200-13 Bedienungsanleitung

Manufacturing, Inc.

www.greatplainsmfg.com

ORIGINAL INSTRUCTIONS

Pre-Delivery Manual

Qualidisc

HS2200-13, HS2200-16, HS2200-20 & HS2200-23

Read the operator’s manual entirely. When you see this symbol, the

subsequent instructions and warnings are serious - follow without

exception. Your life and the lives of others depend on it!

Illustrations may show optional equipment not supplied with standard unit.

ii Great Plains | 556-436Q

HT1100-20 - HT1100-30

Table of Contents

5/9/2022 iii

Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been

taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed

for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products

as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.

Trademarks of Great Plains Manufacturing, Inc. include: AccuShot, Max-Chisel, Row-Pro,

Singulator Plus, Short Disk, Swath Command, Terra-Tine, Ultra-Chisel, and X-Press.

Registered Trademarks of Great Plains Manufacturing, Inc. include: Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone,

Nutri-Pro, Seed-Lok, Solid Stand, Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo-Max, Turbo-Till, Ultra-Till, Whirlfilter, and Yield-Pro.

Brand and Product Names that appear and are owned by others are trademarks of their respective owners.

Printed in the United States of America

Table of Contents

Important Safety Information . . . . . . . . . . . . . . . . . . .1

Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Elements of the machine 7

Axle assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Draw Bar Assembly 12

Hoses holder assembly 13

Drawbar 13

Hoses position on the drawbar 13

Parallel lifting kit assembly 14

Hitch 15

Mounting Folding Wing Frames . . . . . . . . . . . . . . . .16

Parts 16

Assembly 16

Result 18

Wing Extensions 19

Parts 19

Assembly 19

Disc Rows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Necessary tools 20

Mounting Inner Rows 20

Mounting outer rows 21

Overlapping discs 22

U-clamp 23

Result 24

Depth control wheels . . . . . . . . . . . . . . . . . . . . . . . .25

Parts 25

Assembly 25

Hydraulic diagram 26

Deflectors Assembly 27

Parts 27

Assembly 27

Result 28

Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Parts 29

Assembly 29

Finger harrow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Parts 32

Assembly 32

Adjustments 32

Result 33

Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Front signs assembly 34

Parts 34

Assembly 34

Rear signs assembly . . . . . . . . . . . . . . . . . . . . . . . . 35

Parts 35

Assembly 35

Fitting 37

Front 39

Rear 40

Checking the level adjustment . . . . . . . . . . . . . . . .42

Adjusting the level 43

Result 45

Important Safety Information

5/9/2022 1

Important Safety Information

Look for Safety Symbol

The SAFETY ALERT SYMBOL indicates there is a

potential hazard to personal safety involved and extra

safety precaution must be taken. When you see this

symbol, be alert and carefully read the message that

follows it. In addition to design and configuration of

equipment, hazard control and accident prevention are

dependent upon the awareness, concern, prudence and

proper training of personnel involved in the operation,

transport, maintenance and storage of equipment.

Be Aware of Signal Words

Signal words designate a degree or level of hazard

seriousness.

DANGER indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

This signal word is limited to the most extreme situations,

typically for machine components that, for functional

purposes, cannot be guarded.

WARNING indicates a potentially hazardous situation

which, if not avoided, could result in death or serious

injury, and includes hazards that are exposed when

guards are removed. It may also be used to alert against

unsafe practices.

CAUTION indicates a potentially hazardous situation

which, if not avoided, may result in minor or moderate

injury. It may also be used to alert against unsafe

practices.

Prepare for Emergencies

Be prepared if a fire starts.

Keep a first aid kit and fire extinguisher handy.

Keep emergency numbers for doctor, ambulance, hospital

and fire department near phone.

Use Adequate Lifting Means

The frame sections and gangs of this machine are

extremely heavy. If using multiple lifters, make sure each

is rated for at least its share of the load.

2 Great Plains | 556-436M

HS2200-13 - HS2200-23

Be Familiar with Safety Decals

Read and understand the “Safety Decals” topic in the

Operator manual.

Read all instructions noted on the decals.

Keep decals clean. Replace damaged, faded and illegible

decals.

Wear Protective Equipment

Wear clothing and equipment appropriate for the job.

Prolonged exposure to loud noise can cause hearing

impairment or loss. Wear suitable hearing protection such

as earmuffs or earplugs.

Avoid wearing entertainment headphones while operating

machinery. Operating equipment safely requires the full

attention of the operator.

Avoid High Pressure Fluids

Escaping fluid under pressure can penetrate the skin,

causing serious injury.

Avoid the hazard by relieving pressure before

disconnecting hydraulic lines.

Use a piece of paper or cardboard, NOT BODY PARTS, to

check for suspected leaks.

Wear protective gloves and safety glasses or goggles when

working with hydraulic systems.

If an accident occurs, seek immediate medical assistance

from a physician familiar with this type of injury.

Use Safety Lights and Devices

Slow-moving tractors and towed implements can create

a hazard when driven on public roads. They are difficult

to see, especially at night.

Use flashing warning lights and turn signals whenever

driving on public roads.

Use lights and devices provided with implement.

Keep Riders Off Machinery

Riders obstruct the operator’s view. Riders could be

struck by foreign objects or thrown from the machine.

Never allow children to operate equipment.

Keep all bystanders away from machine during operation.

Important Safety Information

5/9/2022 3

Check for Overhead Lines

The Qualidisc requires at least

HS2200-13: 6 feet 7 inches (2.1 m)

HS2200-16 - 23: 13 feet 1 inch (4.0 m)

vertical clearance in transport. Contacting overhead

electrical lines can introduce lethal voltage levels on

Qualidisc and tractor frames. A person touching almost

any metal part can complete the circuit to ground,

resulting in serious injury or death. At higher voltages,

electrocution can occur without direct line or body

contact.

Avoid overhead lines during folding, unfolding, transport

and parking.

Shutdown and Storage

Lower Qualidisc, put tractor in park, turn off engine, and

remove the key.

Secure Qualidisc using blocks and supports provided.

Detach and store Qualidisc in an area where children

normally do not play.

Practice Safe Maintenance

Understand procedure before doing work. Use proper

tools and equipment. Refer to this manual for additional

information.

Work in a clean, dry area.

Lower the Qualidisc, put tractor in park, turn off engine,

and remove key before performing maintenance.

Make sure all system pressure is relieved.

Disconnect battery ground cable (-) before servicing or

adjusting electrical systems or before welding on

Qualidisc.

Inspect all parts. Make sure parts are in good condition

and installed properly.

Remove buildup of grease, oil or debris.

Remove all tools and unused parts from Qualidisc before

operation.

4 Great Plains | 556-436M

HS2200-13 - HS2200-23

Safety At All Times

Thoroughly read and understand the instructions in this

manual before operation. Read all instructions noted on

the safety decals.

Be familiar with all Qualidisc functions.

Operate machinery from the driver’s seat only.

Do not leave Qualidisc unattended with tractor engine

running.

Do not dismount a moving tractor. Dismounting a moving

tractor could cause serious injury or death.

Do not stand between the tractor and Qualidisc during

hitching.

Keep hands, feet and clothing away from moving parts.

Watch out for wires, trees, etc., when folding and raising

Qualidisc. Make sure all persons are clear of working

area.

Important Safety Information

5/9/2022 5

Note the strength class specification for screws, nuts

and bolts. Refer to the table for the corresponding

tightening toque. Securely tighten screws, nuts and

bolts to the specified values, provided that no other

value is specified. The toque specifications refer to ta

dry coefficient of friction.

On a level surface, tighten the bolts evenly, alternating

between the bolts. This ensures that the connections is

distortion-free. Otherwise, damage to the machine may

be caused as a result.

\ WARNING

Use the correct screw and bolt tightening torques

Securely tighten screws, nuts and boles to the specified

torques. Otherwise, damages to the machine and serious or

fatal injuries may be caused as a result.

Bolt Size 8.8 10.9 12.9

N.m ft. lbs N.m ft.lbs N.m ft.lbs

M3 1,41 1,04 2,07 1,53 2,43 1,79

M4 3,22 2,38 4,74 3,50 5,5 4,06

M5 6,4 4,72 9,4 6,94 11 8,12

M6 11,1 8,19 16,3 12,03 19,1 14,10

M8 27 20 39 29 46 34

M10 53 39 78 58 92 68

M12 92 68 136 100 159 117

M14 148 109 218 161 255 188

M16 232 171 341 252 399 294

M18 330 244 469 346 549 405

M20 471 348 667 492 781 576

M22 648 478 920 679 1077 795

M24 809 597 1148 847 1343 991

M27 1201 886 1706 1259 1997 1474

M30 1628 1201 2311 1706 2704 1996

M33 2216 1635 3148 2323 3684 2719

M36 2840 2096 4036 2979 4723 3486

M39 3697 2728 5255 3878 6150 4539

6 Great Plains | 556-436M

HS2200-13 - HS2200-23

Required tools

Andere Handbücher für Qualidisc HS2200-13

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere GREAT PLAINS Landwirtschaftliche Geräte Handbücher

GREAT PLAINS

GREAT PLAINS PL5700 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 3P1006NT-1575 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Yield-Pro 3P4025AH Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 3P1006NT Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS VT1100 Turbo Max Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS BD7600 Leitfaden

GREAT PLAINS

GREAT PLAINS Ultra Chisel 6000 Series Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 3S-4000 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 3S-3000HD Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 1205NT Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS BD7600 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Spartan II 607 Series Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS NTA607HD Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS LS10 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 1205NT Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS PL5700 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS TURBO-TILL II Series Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS 2 Series Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Yield-Pro 3P4025AH Leitfaden

GREAT PLAINS

GREAT PLAINS BD7600 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Terra Max HT1100-10 Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS MC5109 Max-Chisel Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS MC5109 Max-Chisel Bedienungsanleitung

GREAT PLAINS

GREAT PLAINS Short Disk SD2600 Leitfaden

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung