Grizzly H5571 Bedienungsanleitung

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

PRINTED IN TAIWAN

ONLINE MANUAL DISCLAIMER

THE INFORMATION IN THIS MANUAL REPRESENTS THE CONFIGURATION OF THE MACHINE

AS IT IS CURRENTLY BEING SHIPPED. THE MACHINE CONFIGURATION CAN CHANGE AS

PRODUCT IMPROVEMENTS ARE INCORPORATED. IF YOU OWN AN EARLIER VERSION OF

THE MACHINE, THIS MANUAL MAY NOT EXACTLY DEPICT YOUR MACHINE. CONTACT CUS-

TOMER SERVICE IF YOU HAVE ANY QUESTIONS ABOUT DIFFERENCES.

PREVIOUS VERSIONS ARE NOT AVAILABLE ONLINE.

34˚ FRAMING NAILER KIT

MODEL H5571

INSTRUCTION MANUAL

For Your Own Safety Read Instruction Manual

Before Operating This Equipment

Indicates an imminently hazardous situation which, if

not avoided, WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if

not avoided, COULD result in death or serious injury.

Indicates a potentially hazardous situation which, if

not avoided, MAY result in minor or moderate injury.

It may also be used to alert against unsafe practices.

This symbol is used to alert the user to useful infor-

mation about proper operation of the equipment.

The purpose of safety symbols is to attract your attention to possible hazardous

conditions. This manual uses a series of symbols and signal words which are

intended to convey the level of importance of the safety messages. The progres-

sion of symbols is described below. Remember that safety messages by them-

selves do not eliminate danger and are not a substitute for proper accident pre-

vention measures.

NOTICE

Safety Instructions For Pneumatic Tools

1. KEEP ALL SAFETY DEVICES IN

PLACE and in working order.

2. REMOVE ADJUSTING KEYS AND

WRENCHES. Form habit of check-

ing to see that keys and adjusting

wrenches are removed from tool

before operation.

3. KEEP WORK AREA CLEAN.

Cluttered areas and benches invite

accidents.

4. DO NOT USE IN DANGEROUS

ENVIRONMENT. DO NOT use

pneumatic tools in damp or wet

locations, or where any flammable

or noxious fumes may exist. Keep

work area well lighted.

SAFETY

5. KEEP CHILDREN AND VISITORS

AWAY. All children and visitors

should be kept at a safe distance

from work area.

6. MAKE WORKSHOP CHILD

PROOF with padlocks, master

switches, or by removing air hoses

from tools.

7. DO NOT FORCE TOOL. It will do

the job better and safer at the rate

for which it was designed.

8. USE THE RIGHT TOOL. DO NOT

force tool or attachment to do a job

for which it was not designed.

9. DO NOT USE UNDER THE INFLU-

ENCE OF DRUGS OR ALCOHOL.

-1-H5571 34˚ Framing Nailer Kit

H5571 34˚ Framing Nailer Kit-2-

10. USE PROPER AIR HOSE for the

tool. Make sure your air hose is in

good condition and is long enough to

reach your work without stretching.

11. WEAR PROPER APPAREL. DO

NOT wear loose clothing, gloves,

neckties, rings, bracelets, or other

jewelry which may get caught in

moving parts. Non-slip footwear is

recommended. Wear a protective

hair covering to contain long hair.

12. ALWAYS USE SAFETY GLASSES.

Also use a face or dust mask if cut-

ting operation is dusty. Everyday

eyeglasses only have impact resis-

tant lenses, they are NOT safety

glasses.

13. WEAR APPROVED HEARING

PROTECTION.

14. SECURE WORK. Use clamps or a

vise to hold work when practical. It is

safer than using your hand and frees

both hands to operate tool.

15. DO NOT OVERREACH. Keep prop-

er footing and balance at all times.

16. MAINTAIN TOOLS WITH CARE.

Keep tools lubricated and clean for

best and safest performance. Follow

instructions for lubricating and

changing accessories.

17. REDUCE THE RISK OF UNINTEN-

TIONAL STARTING. DO NOT carry

tool with hand on trigger and always

disconnect from air when not in use.

Safety Instructions For Pneumatic Tools

18. DISCONNECT TOOLS before ser-

vicing and changing accessories.

19. USE THE RECOMMENDED

ACCESSORIES. Consult the

owner’s manual for recommended

accessories. The use of improper

accessories may cause risk of

injury.

20. CHECK DAMAGED PARTS.

Before further use of the tool, a

guard or other part that is damaged

should be carefully checked to

determine that it will operate prop-

erly and perform its intended func-

tion. Check for alignment of moving

parts, binding of moving parts,

breakage of parts, mounting, and

any other conditions that may affect

its operation. A guard or other part

that is damaged should be properly

repaired or replaced.

21. NEVER LEAVE UNATTENDED

TOOL CONNECTED TO AIR.

Disconnect the air hose and do not

leave tool until it is relieved of any

built up pressure.

22. NEVER ALLOW UNTRAINED

USERS TO USE THIS TOOL

WHILE UNSUPERVISED.

23. IF YOU ARE UNSURE OF THE

INTENDED OPERATION, STOP

USING THE TOOL. Seek formal

training or research books or maga-

zines that specialize in pneumatic

tools.

H5571 34˚ Framing Nailer Kit -3-

Operating this nailer can propel

objects into the air, causing immedi-

ate eye damage. To protect yourself,

always wear American National

Standards Institute (ANSI) approved

safety glasses or goggles when oper-

ating this equipment. In addition, this

nailer discharges at 85-90 decibels.

To protect your hearing, always wear

ANSI approved ear protection when

operating this nailer.

Basic Nailer Safety

In addition to the rules stated in the previ-

ous section, and those in the warning

boxes throughout this manual, please

observe the following safety tips for your

new nailer:

1. READ THIS ENTIRE MANUAL

BEFORE OPERATING THE NAIL-

ER.

2. ALWAYS DISCONNECT AIR FROM

THE NAILER whenever servicing,

carrying, or installing nails. During

maintenance, a nailer connected to

air may fire accidentally, causing seri-

ous personal injury.

3. DO NOT PLACE HANDS NEAR

NAIL POINT OF ENTRY. Nail can

deflect and be driven through the sur-

face of the workpiece, puncturing

your hand or fingers.

4. NEVER CONNECT THE NAILER TO

PRESSURIZED OXYGEN OR

OTHER COMBUSTIBLE GASES as

a power source. Only use filtered,

lubricated, and regulated compressed

air.

5. ALWAYS KEEP ANY

BYSTANDERS BEHIND NAILER

OR AWAY FROM AREA DURING

USE. Nails may be driven completely

though wood and could become dan-

gerous projectiles.

6. DO NOT CARRY THE NAILER BY

ANY OTHER PART THAN THE

HANDLE, and do not carry the nailer

by the air hose.

7. DO NOT KEEP THE TRIGGER

PULLED ON THE SAFETY YOKE

MECHANISM WHEN CARRYING

OR HOLDING THE TOOL.

8. DO NOT USE A CHECK VALVE OR

ANY OTHER FITTING that allows air

to remain in the tool.

Never point this nailer at yourself or

another person! Always pay attention

to the direction this nailer is pointed.

Use this tool with respect and caution

to lessen the possibility of operator or

bystander injury. Ignoring this warn-

ing may result in serious personal

injury.

H5571 34˚ Framing Nailer Kit-4-

INTRODUCTION

Commentary

Most important, we stand behind our tools.

If you have any service questions or parts

requests, please call or write us at the

location listed below.

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: [email protected]

Web Site: http://www.grizzly.com

We are proud to offer the Grizzly Model

H5571 34˚ Framing Nailer. This model is

part of a growing Grizzly family of fine

power tools. When used according to the

guidelines set forth in this manual, you can

expect years of trouble-free, enjoyable

operation and proof of Grizzly’s commit-

ment to customer satisfaction.

The Model H5571 features a 360˚

adjustable exhaust, a convenient top load-

ing magazine, a safety trigger and a

durable plastic carrying case. The Model

H5571 shoots standard 0.113-0.162 diam-

eter shank D head ("clipped head") nails

2"-31⁄2" in length and accepts up to 50 nails

at a time. At 8 lbs., this model is very light

for its size.

We are pleased to provide this manual

with the Model H5571. It was written to

encourage safety considerations and

guide you through general operating pro-

cedures and maintenance. This manual

represents our effort to produce the best

documentation possible.

The specifications, details, and pho-

tographs in this manual represent the

Model H5571 as supplied when the manu-

al was prepared. However, owing to

Grizzly’s policy of continuous improve-

ment, changes may be made at any time

with no obligation on the part of Grizzly. If

you have any comments regarding this

manual, please write to us at the address

below:

Grizzly Industrial, Inc.

C/O Technical Documentation

P.O. Box 2069

Bellingham, WA 98227-2069

Read the manual before assembly

and operation. Become familiar with

this tool, its safety instructions, and

its operation before beginning any

work. Serious personal injury may

result if safety or operational infor-

mation is not understood or followed.

H5571 34˚ Framing Nailer Kit -5-

Compressed Air System Safety Yoke Mechanism

Exceeding the maximum permissible

operating pressure may cause the

nailer to explode, blowing metal frag-

ments in all directions. To protect

yourself from serious personal injury,

DO NOT allow your air compressor to

exceed the recommended pressure

when connected to this nailer!

The Model H5571 is designed to be oper-

ated at 85-115 psi. DO NOT exceed the

maximum operating pressure!

Before you use your new nailer, regulate

the air pressure on your air compressor to

barely over the minimum psi for your nail-

er. Increase air pressure only if needed.

Many pneumatic tools benefit from an in-

line filter/lubricator/regulator unit. Using

this unit protects your tool from damaging

water build-up, allows you to adjust and

maintain constant air pressure to your tool,

and saves you the inconvenience of having

to manually lubricate your tool every time

you use it. Check the current Grizzly cata-

log for availability of this unit. If you plan on

installing a filter/lubricator/regulator unit in

your compressed air system, always follow

the connection instructions that come with

the unit.

A safety yoke mechanism (bump fire) on

the nose of the nailer acts as a safety

device. When the trigger is pressed, the

nailer will not fire until the safety yoke

mechanism is depressed.

To check the safety yoke:

1. Make sure the nailer is disconnect-

ed from the air supply!

2.Make sure the magazine is empty and

contains no nails.

3. Make sure the trigger and the safety

yoke mechanism move up and down

without sticking.

4. Connect the nailer to the air supply.

5. Without pressing the trigger,

depress the safety yoke mechanism

against a scrap piece of wood that is

clean and free of any knots, nails, or

other foreign objects. If the nailer

DOES NOT FIRE, then the safety

yoke mechanism is working correctly.

If the nailer DOES FIRE when you do

this, immediately disconnect the nailer

from the air supply and call our cus-

tomer service for help.

Similarly if the nailer fires when the trigger

is pulled, without the safety yoke mech-

anism being depressed, then the nailer is

not working properly.

If either of these two conditions develop

after you have used your nailer for a peri-

od of time, check the lubrication of these

mechanisms.

The safety yoke is a mechanical

device that can fail. Never rely on the

safety yoke mechanism as an excuse

to point the nailer at yourself or any

bystanders. Serious injury may occur.

H5571 34˚ Framing Nailer Kit-6-

OPERATION

Loading Nailer

To load your nailer:

1. Disconnect the air supply from the

nailer!

2. Pull the magazine pusher all the way

back until it locks in place.

3. Place a stick of nails into the maga-

zine as shown in Figure 2. Make sure

the pointed ends of the nails are fac-

ing down.

3. Slide the stick of nails all the way

down to the nose of the nailer.

4. Pull the magazine pusher all the way

back, release the catch lever, then let

it come forward until it rests against

the nail stick.

Figure 2. Loading the nailer.

When choosing nails for your Model

H5571, follow these guidelines:

Diameter: 0.113" - 0.162"

Length: 2"-31⁄2"

Capacity: 50 Nails

Oiling Nailer

Special oil has been included with your

new Grizzly nailer to help maintain its use-

ful life. Place one drop of oil in the nailer air

inlet (as shown in Figure 1) before every

use. Wipe off any excess oil near the nail-

er exhaust to avoid dust build-up. When

the oil that was included with the nailer has

been completely used, replace with Grizzly

Model G2820 Pneumatic Tool Oil.

Another option to manual oiling would be

to install a lubricator in your air compressor

line. If your air compressor line already has

a lubricator, then regular lubrication of your

nailer will not be necessary. Just make

sure there is always oil in the lubricator.

As mentioned before, the best option is to

install a filter/lubricator/regulator unit avail-

able in the Grizzly catalog.

Figure 1. Lubricating nailer via air inlet.

The nose of the gun houses a depth

adjustment knob for setting the depth that

the nailer drives nails into the workpiece.

To adjust the depth:

1. If the nail is driven too far into the

workpiece, rotate the knob clockwise

as shown in Figure 4)

2. If the nail is not driven far enough into

the workpiece, rotate the knob

counter clockwise.

H5571 34˚ Framing Nailer Kit -7-

Operating Nailer Adjusting Depth

Figure 4. Depth adjustment knob located

on nailer nose guide.

If you have not read the safety instruc-

tions in this manual, DO NOT operate

the nailer.

Before you operate your nailer, place one

drop of the included oil into the quick con-

nect fitting where the nailer connects to the

air supply.

To operate your nailer:

1. Connect the air supply to the quick

connect fitting.

2. Hold the nailer perpendicular to the

surface of a piece of wood that is thick

enough for the length of nails you

have loaded. Depress the safety yoke

mechanism on your workpiece.

3. Before pressing the trigger, make

sure your free hand is positioned out

of the way of a potential path of a nail

in case of deflection. (Deflection is

caused when the nail changes its

path, resulting in the nail puncturing

the surface of the workpiece as

shown in Figure 3.) Deflection can

cause injury if your free hand is secur-

ing the workpiece in the location that

the nail deflects and damage your

workpiece.

Shallower

Deeper

Figure 3. Example of nail deflection.

4. Pull the trigger. If the nail drove into

the wood far enough, continue with

your intended operations. If the nail

either went too far or not far enough,

adjust the depth.

-8-H5571 34˚ Framing Nailer Kit

Clearing Jammed Nails

The most frequent situation with any type of

nailer is a nail jam. A jammed nail must be

cleared before using the nailer again. The

two places where a nail can get jammed

are the magazine and the discharge area.

To clear a jammed nail from the magazine:

1. Disconnect the nailer from the air

supply!

2.Pull the magazine pusher all the way

back until it locks in place.

3. Locate and remove the jammed nail

with a pair of needle nose pliers. Close

the magazine cover so it latches.

To clear a jammed nail from the dis-

charge area:

1. Disconnect the nailer from the air

supply!

2. Pull the magazine pusher all the way

back until it locks in place.

3. Remove all nails from the magazine.

4. Locate the nail inside of the nailer

nose.

5. Find a tool that will fit inside the slot on

the underside of the nose and dis-

lodge the nail.

6. Throw the damaged nail away and

insert a new nail stick that only con-

tains clean, undamaged nails. DO

NOT use dirty or damaged nails in

your nailer!

Single/Bump Fire Mode

The Model H5571 is equipped with a sin-

gle/bump fire trigger.

To select single or bump fire operation:

1. Disconnect the air supply from the

nailer!

2. Locate the single/bump fire selector

on the trigger. See Figure 5.

3. To select Single Fire mode, push in

the selector and rotate it down.

4. To select Bump Fire mode, push in

the selector and rotate it up.

Always disconnect air from nailer

whenever clearing a jammed nail!

Figure 5. Single/bump fire selector.

H5571 34˚ Framing Nailer Kit -9-

Cleaning Nailer

Use a good solvent to clean the nose

assembly of the nailer. Always be sure that

the nailer is dry before using it again.

Do not allow dust, chips, sand, etc. into the

air connectors or into the body of the nail-

er; this may result in leaks and damage to

the nailer and the air fittings.

Never use gasoline or other flamma-

ble liquids to clean this tool. Vapors

in the tool may ignite, causing the

tool to explode. Ignoring this warning

may lead to serious personal injury or

even death!

Always disconnect air from nailer

whenever servicing! During mainte-

nance, a nailer connected to air may

fire accidentally, causing serious

personal injury!

Andere Handbücher für H5571

Inhaltsverzeichnis

Andere Grizzly Nagelpistole Handbücher

Grizzly

Grizzly H6145 Bedienungsanleitung

Grizzly

Grizzly H7943/H7944 Bedienungsanleitung

Grizzly

Grizzly H7945 Bedienungsanleitung

Grizzly

Grizzly H8235 Bedienungsanleitung

Grizzly

Grizzly G6049 Bedienungsanleitung

Grizzly

Grizzly H6146 Bedienungsanleitung

Grizzly

Grizzly H7679 Bedienungsanleitung

Grizzly

Grizzly H6144 Kurzanleitung

Grizzly

Grizzly H6144 Bedienungsanleitung

Grizzly

Grizzly H5571 Bedienungsanleitung

Grizzly

Grizzly H8233 Bedienungsanleitung

Grizzly

Grizzly T27338 Bedienungsanleitung

Grizzly

Grizzly H6146 Kurzanleitung

Grizzly

Grizzly G6045 Bedienungsanleitung

Grizzly

Grizzly 1 1/4" Brad Nailer T20568 Bedienungsanleitung

Grizzly

Grizzly H2911 Bedienungsanleitung

Grizzly

Grizzly G6045 Bedienungsanleitung

Grizzly

Grizzly H7664 Kurzanleitung

Grizzly

Grizzly H8232 Bedienungsanleitung

Grizzly

Grizzly H5527 Bedienungsanleitung

Grizzly

Grizzly G1847 Bedienungsanleitung

Grizzly

Grizzly H5527 Bedienungsanleitung

Grizzly

Grizzly G1847 Bedienungsanleitung

Grizzly

Grizzly H6143 Bedienungsanleitung

Beliebte Nagelpistole Handbücher anderer Marken

Performance Tool

Performance Tool M643 Bedienungsanleitung

Hitachi

Hitachi VH650 - Fencing Nailer, Full Head Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Senco

Senco Fusion Technology F-35XP Bedienungsanleitung

Ryobi

Ryobi R18N18G Bedienungsanleitung

Black & Decker

Black & Decker 492848-00 Bedienungsanleitung

HOLZMANN MASCHINEN

HOLZMANN MASCHINEN TN90 Bedienungsanleitung

Metabo HPT

Metabo HPT NR 3690DC Bedienungsanleitung

Surtek

Surtek CN650 Abmessungen und Installationsanleitung

Makita

Makita GF600 Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Senco

Senco AirFree 25 Bedienungsanleitung

Freeman

Freeman P50LSLW Bedienungsanleitung

Aicon PRO

Aicon PRO DAC4507 Bedienungsanleitung

DAJ

DAJ XR150A Bedienungsanleitung

Makita

Makita AN923 Bedienungsanleitung

Black & Decker

Black & Decker 90514937 Bedienungsanleitung

Alfamacchine

Alfamacchine Minigraf 4 Handbuch