Ground Zero HYDROGEN GZHA 1.1200DXII Bedienungsanleitung

Amplifier

Owner’s Manual

HYDROGEN

GZHA 1.1200DXII

GZHA 1.1800DXII

PLEASE READ BEFORE INSTALLATION

Thank you for selecting a Ground Zero amplifier.

We are providing a helpful hints list which should keep you from experiencing

unnecessary shut down.

Have fun with this high quality Hydrogen product.

Hydrogen amplifier

Due to their state- of- the- art technology and high efficiency, these Class-D mono amplifiers help your system to

provide an impressive sound experience.

The digital circuit technology of the power supply and the signal processing allows achieving maximum

performance levels from the provided power. Due to the different filters and circuits a very high power output is

achieved, therefore these amplifiers are made for low frequency information (Subwoofer). They can not be used

for high- and midrange speakers.

The link mode enables to use to full power of two amplifiers for one speaker. This is first of all advantageous for a

really powerful and lively music playback.

Features

• Class-D Design for high efficiency

• Stabilized dual power supply

• Damping factor >180 at 100 Hz 4Ω

• 16 Volt max. Voltage supply

• Linkable with 1 amplifier

• 1 Ωstable (Linkmode 2Ω)

• Full Power MOS-FET amplifier

• Power and Protection indicator

• Variable lowpass 30 – 250 Hz

• Variable subsonic 5 – 50 Hz

• 180° variable Phase Shift

• Aluminum heat sink

• Adjustable input sensitivity 200mV ~ 9 Volt

• RCA Inputs & Outputs

• Bassremote Control

• 0 ~ +9dB Bassboost (30 – 80 Hz)

Tools and materials you need

•Screwdriver

•Electric drill, 3 mm / 0.12” carbide drill bit

•Mounting screws

•Power wire min. 35 mm² / 2 AWG

•Ground wire min. 35 mm² / 2 AWG

•Speaker wire min. 2 x 4 mm² / 11 AWG

Please note!

•As a precaution it is advisable to disconnect the vehicle’s battery before making

connection to the +12 Volts supply wiring (see owner’s manual of your car for further

information).

•Please use great caution drilling your trunk. Your gas tank and brake lines can be

damaged by puncturing with your drill bit – this could cause damage or failure of your

cars operating systems.

•Never pass wires over sharp angles. It is recommended to buffer the power supply of

the amplifier with an additional battery (GZBP 12.2500 or GZBP 12.3500) to

guarantee a stable operation voltage.

WARNING !

High powered audio systems in a vehicle are capable of generating "Live Concert" levels of sound

pressure. Continued exposure to excessively high volume sound levels may cause hearing loss or

damage. Also, operation of a motor vehicle while listening to audio equipment at high volume

levels may impair your ability to hear external sounds such as; horns, warning signals, or

emergency vehicles, thus constituting to a potential traffic hazard. In the interest of safety,

Consumer Electronics recommends listening at lower volume levels while driving.

Planning your system

Before beginning the installation, consider the following:

a. If you plan to expand your system by adding other components sometime in the

future, ensure adequate space is left, and cooling requirements are met.

b. If your radio is equipped with preamplifier outputs (RCA), it is advisable to use them.

Mounting your amplifier

a. Select a suitable location that is convenient for mounting, is accessible for wiring

and has ample room for air circulation and cooling.

b. Use the amplifier as a template to mark the mounting holes, remove the amplifier and

drill 4 holes. Then mount the amplifier with the mounting screws.

Warning

Chose a mounting position where all eclectic wires are protected from being damaged by sharp edges, heat or

other conditions. +12Volt DC electrical connections must be fused on the battery side. Make sure your radio and

all other devices will be turned off while connection your system.

The GZHA 1.1800DXII does not have an internal fuse. Therefore it is absolutely necessary to

connect the ANL- fuseholder (included in delivery) with its 180 A fuse. The cable length between

amplifier and fuseholder must not be longer than max 20 cm / 7.9”. Please see the connection

diagram on the following side for correct wiring.

Power connection – GZHA 1.1200DXII

Power connection – GZHA 1.1800DXII

Controls and functions – GZHA 1.1200DXII

Controls and functions – GZHA 1.1800DXII

Controls and functions

1 Speaker terminals For connection of the subwoofer

2 Power terminals GND -> Ground connection

REM -> Remote antenna terminal

BATT -> +12 Volt

3 Satus indication BLUE

–

RED – Error

4 Cinch inputs Terminal for connection of the RCA wires.

To avoid failure, please use high quality RCA wires.

5 Input level controlle

With this controller you can adjust the input sensitivity.

6 Bass boost controlle

For adjusting of the bass boost level in the range from 0 to +9 dB.

7 Bass frequency controller For adjusting of the bass boost frequency in a range

from 30Hz to 80Hz.

8 Subsonic controller

This controller allows you to filter low frequencies in a range between

5 and 50 Hz. This function reduces the mechanical Xmax and raises

the capacity of the connected subwoofer.

9 Cinch Outputs For connection of additional amplifiers.

10 Low pass controller

djust the variable lowpass frequency to the desired frequency

between 30 and 250 Hz using the controller.

11 Phase shift controller This controller allows you to fit the subwoofer channel in-phase to the

front system.

12 Remote control input For connection of the bass remote control.

13 Slave In connection For connection of the slave amplifier in link mode. See page 10

14 Master Out connection For connection of the master amplifier in link mode. See page 10

15 Master / Slave Switch For choosing the operation mode of each amplifier in link mode. See

page 10

16 Capacitor connection For connection of a optional powercap.

Turning on the amplifier

The amplifier automatically turns on a few seconds after you turn on your radio.

Note: Your amplifier temporarily shuts down if it gets too hot, then restarts automatically once it cools

(At about 80° / 176° F).

Adjusting the audio level

1. LEVEL (Min/Max): Turn fully counter- clockwise to MIN position

2. Turn the auto sound system's volume control to about two-third of its full range.

3. Adjust LEVEL to a comfortable listening level.

Connecting the speaker

Master & Slave operation

Specifications

Model GZHA 1.1200DXII GZHA 1.1800DXII

RMS Power @ 4 Ω

CEA Standard CEA-2006-A 500W (1% THD+N) 650W (1% THD+N)

RMS Power @ 2 Ω

CEA Standard CEA-2006-A 900W (1% THD+N) 1150W (1% THD+N)

RMS Power @ 1 Ω

CEA Standard CEA-2006-A

1400W (1% THD+N)

1900W (10% THD+N)

1800W (1% THD+N)

2400W (10% THD+N)

RMS Power @ 2ΩLinkmode

CEA Standard CEA-2006-A 1 x 3800W (10% THD+N) 1 x 4800W (10% THD+N)

Damping factor > 180 > 180

Signal to noise Ratio > 90 dB > 90 dB

Lowpass 30 – 250 Hz (24 dB) 30 – 250 Hz (24 dB)

Subsonic filter 5 Hz – 50 Hz (24 dB) 5 Hz – 50 Hz (24 dB)

Bass boost 0 ~ +9 dB 0 ~ +9 dB

Bass boost Frequency 30 Hz ~ 80 Hz 30 Hz ~ 80 Hz

Phase shift 0 – 180° 0 – 180°

Frequency response 10 Hz – 250 Hz 10 Hz – 250 Hz

Efficiency @ 4 Ω~ 80 % ~ 80 %

Input sensitivity 200 mV – 9 V

(± 5%)

200 mV – 9 V

(± 5%)

THD < 0,50 % < 0,50 %

Bass remote 99

Fuse -- --

Dimensions

W x H x L mm 305 x 62 x 360 305 x 62 x 400

Dimensions

W x H x L inch 12 x 2.44 x 14.2“ 12 x 2.44 x 15.7“

Trouble shooting guide

Symptoms Check Points Cure

No sound

Is the POWER LED illuminated?

Check fuses in amplifier.

Be sure remote lead is connected.

Check signal leads.

Check again control.

Check tuner/deck volume level.

Is the diagnostic LED illuminated? Check for speaker short or

amplifier overheating

Amp not switching on

No power to the amplifier Check power wire or connections

No power to remote wire with

receiver on Check connections to radio

No sound in one channel

Check speaker leads Inspect for short circuit or an open

connection

Check audio leads

Reverse left and right RCA inputs

to determine if it is occurring

before the amp

Amp turning off at medium /

high volume Check speaker load impedance

Be sure proper speaker load

impedance recommendations are

observed

(If you use an ohm meter to

check speaker resistance, please

remember that DC resistance and

AC impedance may not be the

same.)

Protection LED is on

Temperature shut down Turn radio volume down

Speaker wires short Separate speaker wires and

insulate

Die Gewährleistung entspricht der gesetzlichen Regelung. Eine Rücksendung kann nur nach

vorheriger Absprache und in der Originalverpackung erfolgen. Bitte unbedingt einen maschinell

erstellten Kaufbeleg und eine Fehlerbeschreibung beilegen. Von der Gewährleistung

ausgeschlossen sind Defekte, die durch Überlastung, unsachgemäße Behandlung oder bei

Teilnahme an Wettbewerben entstanden sind.

Limited warranty - defective products must be returned in original packaging - please add a copy

of the original purchasing invoice showing the purchasing date and a detailed description of the

failure. Failure caused by overload, misuse or by using the product for competition purpose are

not covered by the warranty.

De Garantie bepalingen van alle door ground zero geleverde producten is volgens wettelijke

bepalingen geregeld, Een retourzending kan alleen na duidelijke afspraak en in de originele

verpakking plaatsvinden.SVP een aankoopbon en een duidelijke storingsomschrijving

bijvoegen.Van garantie uitgesloten zijn defecten door overbelasting, onkundig gebruik, of door

deelname aan wedstrijden (SPL) ontstaan zijn.

La garantie est conforme aux droits légaux. Un retour du produit défectueux doit être dans son

emballage d'origine sur présentation du reçu ou de la facture indiquant la description du

defaut.La présente Garantie n'est pas applicable lorsque le produit a été endommagé en raison:

Mauvaise alimentation, Trop de puissance (HP,Subwoofer) Accident, Installation ou Utilisation non

conforme aux normes Technique (Concours SPL etc).

GROUND ZERO GmbH

Erlenweg 25; D - 85658 Egmating, Germany

Tel. +49 (0)8095/873 830 Fax -8310

www.ground-zero-audio.com

Wir behalten uns das Recht vor, zukünftig nötige Änderungen oder Verbesserungen an dem

Produkt vorzunehmen ohne den Kunden darüber zu informieren.

We reserve the right to make needed change or improvement to the product without informing

customer about this in advance.

Wij behouden ons het recht om de nodige veranderingen of verbeteringen aan het product door

te voeren zonder de klant hierover te informeren.

Nous nous réservons le droit d'entreprendre à l'avenir nécessairement des modifications ou des

améliorations au produit sans informer le client.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ground Zero Verstärker Handbücher

Ground Zero

Ground Zero GZUA 2.250SQ Bedienungsanleitung

Ground Zero

Ground Zero TITANIUM GZTA 5120X Bedienungsanleitung

Ground Zero

Ground Zero GZRA 4230X Bedienungsanleitung

Ground Zero

Ground Zero RADIOACTIVE Series Bedienungsanleitung

Ground Zero

Ground Zero TITANIUM Series Bedienungsanleitung

Ground Zero

Ground Zero IRIDIUM SERIES Bedienungsanleitung

Ground Zero

Ground Zero Competition Series Bedienungsanleitung

Ground Zero

Ground Zero PLUTONIUM GZPA 1.6000D Bedienungsanleitung

Ground Zero

Ground Zero Competition Series Bedienungsanleitung

Ground Zero

Ground Zero IRIDIUM SERIES Bedienungsanleitung

Ground Zero

Ground Zero GZIA 1.1150D Bedienungsanleitung

Ground Zero

Ground Zero GZIA 1.300HPX-B Bedienungsanleitung

Ground Zero

Ground Zero NUCLEAR GZNA 2800X Bedienungsanleitung

Ground Zero

Ground Zero GZCA 8.0K-SPL Bedienungsanleitung

Ground Zero

Ground Zero RADIOACTIVE GZRA MICRO FOUR Bedienungsanleitung

Ground Zero

Ground Zero GZCA 20.0SPL-M1 Bedienungsanleitung

Ground Zero

Ground Zero TITANIUM GZTC 1.0FX Bedienungsanleitung

Ground Zero

Ground Zero GZDSP 4.80AMP Bedienungsanleitung

Ground Zero

Ground Zero NUCLEAR Series Bedienungsanleitung

Ground Zero

Ground Zero Competition Series Bedienungsanleitung

Ground Zero

Ground Zero GZRA 4HD Bedienungsanleitung

Ground Zero

Ground Zero RADIOACTIVE GZRA 4230 Bedienungsanleitung

Ground Zero

Ground Zero GZHA 2350XII Bedienungsanleitung

Ground Zero

Ground Zero GZPA 1.10000SPL-HC Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung