Grundig DSR 1773 CY Bedienungsanleitung

DIGITAL

SATELLITE

RECEIVER

DSR 1773 CY

CONTENTS

4-5 General information

4 Packing contents

4 Receiving digital stations

5 Special features of your digital receiver

6 Set-up and safety

7-8 Overview

7 The digital satellite receiver

7 The infrared receiver

8 The remote control

9-11 Connection and preparation

9 Connecting the antenna

9 Connecting the television

10 Connecting the infrared receiver

10 Connecting the power supply unit

10 Inserting batteries in the remote control

11 Inserting a Smart card

11 Connecting the Dolby Surround system

12-19 Basic settings

12 The menu

13 Initial setup

14 Settings stations, Option 1

15-16 Settings stations, Option 2

17-19 Editing favourites lists

20-22 Basic functions

20 Switching on and off

20 Mode selection

20 Selecting presets

20 Selecting stations from lists

21 Switching from the current station to the previous one

21 Adjusting the volume

21 Muting the sound

21 Displaying the time

21 Using options

22 Electronic TV Guide

23 Teletext mode

23 Teletext

23 Additional functions

24-31 Settings

24-25 Picture settings

26-27 Language settings

28-29 Menu settings

30-31 Miscellaneous settings

ENGLISH

CONTENTS____________________________________________

32 The recording timer

33-34 Additional functions

33 Security functions

34 Conditional access

35-39 Special settings

35-36 Searching for new stations

37 LNB settings

38 Resetting the digital receiver to its original state

38 Updating the digital receiver software

39 Changing remote control levels

40-42 Information

40 Displaying station reception properties

40 Displaying device information

41 Technical data

41 Environmental note

42 Troubleshooting

Packing contents

Digital Satellite Receiver DSR 1773 CY

Tele Pilot 766 S remote control with 2 batteries

SCART extension cable

Power supply unit

Infrared receiver

Operating manual

Receiving digital satellite channels

In order to use your new DSR 1773 CY digital receiver you need a

digital-compatible satellite antenna, which must be installed and ali-

gned to the satellites (for example Astra and EutelSat/Hotbird).

Unlike broadcasts of analog satellite channels, not every digital TV or

radio station is assigned to one transmission frequency, but several TV

and/or radio stations are broadcast by one transponder.

To help you with the choice and settings for satellite channels, a

selection of TV and radio stations have already been programmed

for this device. You can start a channel search to ensure that any

new satellite channels are available on your device.

How this works and what you need to remember can be found on

page 35 of this operating manual.

Of course, you can easily program new satellite channels. You can

find the latest transponder information on the teletext pages of

various broadcasters, in a current satellite TV magazine or on the

internet.

GENERAL INFORMATION__________________

ENGLISH

Special features of your digital receiver

This digital receiver DSR 1773 CY has a built-in digital receiver unit for

satellite channels. The receiver unit converts the signals from digital

satellite channels to provide outstanding audio and picture quality.

The DSR 1773 CY digital receiver can receive and process encrypted

and all unencrypted digital channels.

So that your new digital receiver always works with the latest program

data and operating software, it is first necessary to conduct an update.

Using the Astra 19.2° East satellite, you can update the device software

of the satellite receiver. How this works and what you need to remember

can be found on page 40 of this operating manual.

The TV guide tells you of any schedule changes at short notice, and also

provides an overview of all the channels’ schedules for the next few

hours.

Detailed information on individual television programmes is available at

the touch of a button.

This digital receiver has a very comprehensive, user-friendly menu

system. The menu is displayed on the television screen, and the functions

of the remote control buttons are explained.

GENERAL INFORMATION__________________

SET-UP AND SAFETY___________________________

To ensure that this high-quality and user-friendly digital receiver

provides you with many years of entertainment, please observe the

following instructions:

This digital receiver set is designed to receive video and audio

signals. Any other use is expressly prohibited.

When setting up the device, make sure the mains plug is easily

accessible.

If the digital receiver is subject to a sudden change in temperature,

for example when brought in from the cold to a warm room, let it

stand for at least two hours before you connect it to the mains supply.

Do not expose the digital receiver to moisture of any kind.

The digital receiver is designed for use in dry rooms. If you do use it

outdoors, make sure it is protected from moisture such as rain or

splashing water.

Thunderstorms are a danger to all electrical devices. Even if the digital

receiver is switched off, it can be damaged by a lightning strike to the

mains or the antenna.

Always disconnect the mains and antenna plugs during a storm.

Never open the digital receiver casing under any circumstances.

Warranty claims are excluded for damage resulting from improper

handling.

Notes:

Do not connect any other equipment while the device is switched

on. Switch off the other equipment as well before connecting it.

Do not plug in the power supply of your device until you have

connected the external equipment and the antenna.

Make sure the power supply is freely accessible.

ENGLISH

OVERVIEW____________________________________________

The digital satellite receiver

ʐʐ

IN Antenna socket for the satellite

antenna.

Smart card reader.

EURO AV SCART connector (output) for

connecting to TV.

IR remote Connection socket for infrared

receiver.

SP DIF Audio outputs (optical) for PCM/

Dolby digital/DTS signals.

For connecting to a digital multi-

channel audio/video amplifier or

AV receiver.

12 VDC Connection socket for the

18 W max. power supply unit supplied.

The infrared receiver

The infrared receiver receives the infrared signals

for the remote control and forwards the commands

by wire to the digital receiver. Position the infrared

receiver so that it can receive the remote control

commands.

When you switch on from standby, the receiver

switches to the last selected station (Last Station

Memory).

•(red) The digital receiver is in standby

mode.

•(green) The digital receiver is switched on.

OVERVIEW____________________________________________

The remote control

ǼSwitches the digital receiver to standby, and from

standby to the channel last selected.

PIP This has no function.

EDisplays the picture format and the audio information.

?Displays programme information.

1 … 0 Select stations.

dSwitches the sound to mute and on again.

iOpens the main menu.

ZSwitches the current menu level off.

ǸǷ Adjust the volume.

P+ P- Switch channels up and down one by one.

OK Opens the channel list.

Press

A/B

to switch from the channel lists to favourite

lists.

TXT Switches from TV mode to teletext mode, mix mode

and back to TV mode.

TV-G Opens the electronic TV guide.

Switches to TV mode.

MHP

This has no function.

A/B

Switches between the two most recently selected

channels.

RADIO Switches to radio mode.

ȄDisplays the time.

ǷǷSwitches between audio channels.

FOpens the options (not available for all stations).

DR, TV Switches to operating a GRUNDIG

DVD AV receiver, GRUNDIG television or GRUNDIG

DVD player.

Keep the appropriate button (»DR«, »TV«, »DVD«)

pressed down. Then press the appropriate button.

Note:

The functions available depend on the model of the

device you are using.

Just try it out.

Tele Pilot 766 S

DR DVD

TXT

PIP

A/B

MHP

TV-G

Radio

ENGLISH

CONNECTION/PREPARATION __________

Connecting the antenna

1Connect the antenna cable of the satellite antenna to the socket

»ʐʐIN« of the digital receiver (screw connector, F connector).

Connecting the television

1Plug the digital receiver into the corresponding SCART socket

on the television.

If this is not possible for reasons of space, use the SCART

extension supplied.

CONNECTION/PREPARATION __________

Connecting the infrared receiver

1Insert the plug of the infrared receiver into the »IR remote«

socket of the digital receiver.

Connecting the power supply unit

1Insert the plug of the power supply unit supplied into the

»12 VDC« socket of the digital receiver.

2Insert the power supply unit into the wall socket.

Notes:

Do not insert the power supply unit of your device into the

socket until you have connected the television and the antenna.

The only way to fully disconnect the digital receiver from the

mains supply is to pull out the power supply.

Inserting batteries in the remote control

1Open the battery compartment by removing the lid.

2Put in the batteries (AA, 2 x 1.5 V). Make sure the polarity is

correct (as shown on the base of the battery compartment).

3Close the battery compartment.

Note:

If the digital receiver no longer reacts properly to remote control

commands, the batteries may be flat. Always remove used

batteries.

The manufacturer accepts no liability for damage caused by

leaking batteries.

Environmental note

Batteries, including those which contain no heavy metal, should

not be disposed of with household waste. Please dispose of

used batteries in an environmentally sound manner. Find out

about the legal regulations which apply in your area.

Inhaltsverzeichnis

Andere Grundig Empfänger Handbücher

Grundig

Grundig STR 6100 Bedienungsanleitung

Grundig

Grundig DTR 1560 MICRO Bedienungsanleitung

Grundig

Grundig STR 6122 TWIN Bedienungsanleitung

Grundig

Grundig STR 6122 Bedienungsanleitung

Grundig

Grundig STR-622 TWIN Bedienungsanleitung

Grundig

Grundig GSTB 3100HD Bedienungsanleitung

Grundig

Grundig STR 631 Bedienungsanleitung

Grundig

Grundig STR 6000 Bedienungsanleitung

Grundig

Grundig DTR 1520 Bedienungsanleitung

Grundig

Grundig STR 7122 TWIN Bedienungsanleitung

Grundig

Grundig Yacht Boy P 2000 Bedienungsanleitung

Grundig

Grundig DSR 5450 HD Bedienungsanleitung

Grundig

Grundig STR 2300 FR Bedienungsanleitung

Grundig

Grundig R 23 DPL Bedienungsanleitung

Grundig

Grundig STR 100 DX microSAT Bedienungsanleitung

Grundig

Grundig WR 5408 PLL Bedienungsanleitung

Grundig

Grundig GUFSAT01SD Bedienungsanleitung

Grundig

Grundig Globe Traveler G3 Bedienungsanleitung

Grundig

Grundig R 1000 DPL Bedienungsanleitung

Grundig

Grundig Satellit 500 Bedienungsanleitung

Grundig

Grundig DTR 1782 VC Bedienungsanleitung

Grundig

Grundig DTR 2544 Bedienungsanleitung

Grundig

Grundig STR 7100 Bedienungsanleitung

Grundig

Grundig M 100-CF Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung