Grundig DTR 1782 VC Bedienungsanleitung

DIGITAL TERRESTRIAL

RECEIVER

DTR 1782 VC

CONTENTS____________________________________________

4 General information

4 Packing contents

4 Receiving digital stations

4 Special features of your digital receiver

5 Set-up and safety

6-7 Overview

6 The digital satellite receiver

6 The infrared receiver

7 The remote control

8-9 Connection and preparation

8 Connecting the antenna

8 Connecting the television

8 Connecting the infrared receiver

9 Connecting the digital multi-channel amplifier

9 Connecting the power supply unit

9 Inserting batteries in the remote control

10-14 Basic settings

10 The menu

11-12 Searching for stations

12-13 Creating and editing favourite lists

14 Filtering stations in the station list

15-17 Basic functions

15 Switching on and off

15 Mode selection

15 Selecting presets

15 Selecting stations from lists

16 Switching from the current station to the previous one

16 Adjusting the volume

16 Muting the sound

16 Displaying the time

16 Using options

17 Electronic TV Guide

18 Teletext mode

18 Teletext

18 Additional functions

19-25 Settings

19-20 Picture settings

20-21 Language settings

22-23 Menu settings

24-25 Miscellaneous settings

26 The recording timer

ENGLISH

CONTENTS____________________________________________

27 Additional functions

27 Security functions

28-31 Special settings

28 Automatic station search

29 Manual station search (expert search)

30 Resetting the digital receiver to its original state

30 Updating the digital receiver software

31 Changing remote control levels

32 Pay TV mode

32 Inserting a Smart card

32 Using a Smart card

33-35 Information

33 Displaying station reception properties

33 Displaying device information

34 Technical data

34 Environmental note

35 Troubleshooting

Packing contents

1Digital Satellite Receiver DTR 1782 VC

2Tele Pilot 766 S remote control

32 batteries for the remote control (2 x 1.5 V, AA type batteries)

4SCART extension cable

5Power supply unit

6Operating manual

Receiving digital stations

To use your new DTR 1782 VC digital receiver you need a digital

outdoor or indoor antenna.

Unlike analogue broadcasting, not every station has its own trans-

mission frequency. Instead, several stations are grouped into what

are known as bouquets on a regional or national level.

You can find the current transmission information on teletext from

various broadcasters, or look in a TV guide or on the Internet.

Special features of your digital receiver

The DTR 1782 VC digital receiver can receive and process all unen-

crypted digital stations. This digital receiver has a built-in digital

receiver unit. The receiver unit converts the signals from digital sta-

tions to provide outstanding audio and picture quality.

The TV guide tells you of any schedule changes at short notice, and

provides an overview of all the stations’ schedules for the next few

hours.

Detailed information on the individual stations can be displayed at

the touch of a button, if this is provided by the broadcaster.

This digital receiver has a very comprehensive, user-friendly menu

system.

The menu is displayed on the television screen, and the functions of

the remote control buttons are explained.

GENERAL INFORMATION__________________

ENGLISH

SET-UP AND SAFETY___________________________

To ensure that this high-quality and user-friendly digital receiver

provides you with many years of entertainment, please observe the

following instructions:

This digital receiver set is designed to receive video and audio

signals. Any other use is expressly prohibited.

When setting up the device, make sure the mains plug is easily

accessible.

If the digital receiver is subject to a sudden change in temperature,

for example when brought in from the cold to a warm room, let it

stand for at least two hours before you connect it to the mains supply.

Do not expose the digital receiver to moisture of any kind.

The digital receiver is designed for use in dry rooms. If you do use it

outdoors, make sure it is protected from moisture such as rain or

splashing water.

Thunderstorms are a danger to all electrical devices. Even if the digital

receiver is switched off, it can be damaged by a lightning strike to the

mains or the antenna.

Always disconnect the mains and antenna plugs during a storm.

Never open the digital receiver casing under any circumstances.

Warranty claims are excluded for damage resulting from improper

handling.

Notes:

Do not connect any other equipment while the device is switched

on. Switch off the other equipment as well before connecting it.

Do not plug in the power supply of your device until you have

connected the external equipment and the antenna.

Make sure the power supply is freely accessible.

OVERVIEW____________________________________________

The digital satellite receiver

IR remote Connection socket for infrared

receiver.

RF IN Input socket for the indoor or

outdoor antenna.

RF OUT Antenna output socket for

connecting an HF cable to the

antenna socket of the television

or DVD recorder.

Smart card reader.

EURO AV SCART connector (output) for

connecting to TV.

SP DIF Audio outputs (optical) for PCM/

Dolby digital/DTS signals.

For connecting to a digital multi-

channel audio/video amplifier or

AV receiver.

12 VDC Connection socket for the

18 W max. power supply unit supplied.

The infrared receiver

The infrared receiver receives the infrared

signals for the remote control and forwards the

commands by wire to the digital receiver. Position

the infrared receiver so that it can receive the

remote control commands.

When you switch on from standby, the receiver

switches to the last selected station (Last Station

Memory).

•(red) The digital receiver is in standby

mode.

•(green) The digital receiver is switched on.

ENGLISH

OVERVIEW____________________________________________

The remote control

ǼSwitches the digital receiver to standby, and from

standby to the channel last selected.

?Displays programme information.

1 … 0 Select stations.

dSwitches the sound to mute and on again.

iOpens the main menu.

ZSwitches the current menu level off.

ǸǷ Adjust the volume.

P+ P- Switch channels up and down one by one.

OK Opens the channel list.

Press

A/B

to switch from the channel lists to favourite

lists.

TXT Switches from TV mode to teletext mode, mix mode

and back to TV mode.

TV-G Opens the electronic TV guide.

Switches to TV mode.

A/B

Switches between the two most recently selected

channels.

RADIO Switches to radio mode.

ȄDisplays the time.

ǷǷSwitches between audio channels.

FOpens the options (not available for all stations).

DR, TV Switches to operating a GRUNDIG

DVD AV receiver, GRUNDIG television or GRUNDIG

DVD player.

Keep the appropriate button (»DR«, »TV«, »DVD«)

pressed down. Then press the appropriate button.

Note:

The functions available depend on the model of the

device you are using.

Just try it out.

CONNECTION/PREPARATION __________

Connecting the antenna

1Connect the cable of the indoor or outdoor antenna to the

»RF IN« socket on the digital receiver.

2Connect the »RF OUT« socket of the digital receiver to the

antenna socket of the television using an HF cable (loop through

function for analogue broadcasts).

Connecting the television

1Plug the digital receiver into the corresponding SCART socket

on the television.

If this is not possible for reasons of space, use the SCART

extension supplied.

Connecting the infrared receiver

1Insert the plug of the infrared receiver into the »IR remote«

socket of the digital receiver.

ENGLISH

CONNECTION/PREPARATION __________

Connecting the digital multi-channel amplifier

1Plug a standard RCA cable into the »SPDIF« socket on the

digital receiver and the corresponding socket on the digital

multi-channel amplifier.

Connecting the power supply unit

1Insert the plug of the power supply unit supplied into the

»12 VDC« socket of the digital receiver.

2Insert the power supply unit into the wall socket.

Notes:

Do not insert the power supply unit of your device into the

socket until you have connected the television and the antenna.

The only way to fully disconnect the digital receiver from the

mains supply is to pull out the power supply.

Inserting batteries in the remote control

1Open the battery compartment by removing the lid.

2Put in the batteries (AA, 2 x 1.5 V). Make sure the polarity is

correct (as shown on the base of the battery compartment).

3Close the battery compartment.

Note:

If the digital receiver no longer reacts properly to remote control

commands, the batteries may be flat. Always remove used

batteries.

The manufacturer accepts no liability for damage caused by

leaking batteries.

Environmental note

Batteries, including those which contain no heavy metal, should

not be disposed of with household waste. Please dispose of

used batteries in an environmentally sound manner. Find out

about the legal regulations which apply in your area.

The menu

This digital receiver has a very comprehensive, user-friendly menu

system. The menu is displayed on the television screen.

The digital receiver responds to many functions which you select on

the remote control with informative menus and icons on the tele-

vision screen.

It enables you to select many different settings and contains infor-

mation on using your digital receiver.

The menu contains the most important controls for your digital

receiver. Its menu system controls the dialogue between you and the

digital receiver.

Press »i« to open the main menu. You can navigate in the menu by

pressing »P-« or »P+« and select the symbol. The selected symbol

is highlighted.

When you press »OK« to confirm your selection, a sub-menu

appears. You can also navigate here by pressing »P-« or »P+«

and select the item you want. The selected item is highlighted.

Press »OK« to confirm. Another menu usually appears, where you

can use »P-« or »P+« to navigate and make the setting. Make

settings using »P-«, »P+«, »Ǹ« or »Ƿ«.

Press »Z« to quit the current menu level.

Press »i« to quit the menu entirely.

BASIC SETTINGS __________________________________

Inhaltsverzeichnis

Andere Grundig Empfänger Handbücher

Grundig

Grundig OCEAN BOY 350 Bedienungsanleitung

Grundig

Grundig R 1000 DPL Bedienungsanleitung

Grundig

Grundig DSR 4530 HDD Bedienungsanleitung

Grundig

Grundig RR 740 CD Bedienungsanleitung

Grundig

Grundig STR 611 Bedienungsanleitung

Grundig

Grundig DSR 1773 CY Bedienungsanleitung

Grundig

Grundig DSR 3410 CI Bedienungsanleitung

Grundig

Grundig DSR 2410 Bedienungsanleitung

Grundig

Grundig GUFSAT02SD Bedienungsanleitung

Grundig

Grundig Yacht Boy P 2000 Bedienungsanleitung

Grundig

Grundig 100 PE Bedienungsanleitung

Grundig

Grundig STR 7100 FR Bedienungsanleitung

Grundig

Grundig OCEAN BOY 350 Bedienungsanleitung

Grundig

Grundig CINIO AVR 5200 DD GLO0150 Bedienungsanleitung

Grundig

Grundig STC 316 Bedienungsanleitung

Grundig

Grundig M 100-ADPL Bedienungsanleitung

Grundig

Grundig SER 300a Bedienungsanleitung

Grundig

Grundig STR 7122 TWIN Bedienungsanleitung

Grundig

Grundig DTR 5464 HD Bedienungsanleitung

Grundig

Grundig M 100-CF Bedienungsanleitung

Grundig

Grundig STE 1000 Bedienungsanleitung

Grundig

Grundig Satellit 650 Bedienungsanleitung

Grundig

Grundig STR 632 Bedienungsanleitung

Grundig

Grundig SER 251 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung