Grundig DTR 1560-2 MICRO Bedienungsanleitung

DIGITAL

SATELLITE RECEIVER

DTR 1560-2 MICRO

CONTENTS____________________________________________

4 General information

4 Packing contents

4 Receiving digital stations

4 Special features of your digital receiver

5 Set-up and safety

6-7 Overview

6 The digital receiver

6 The infrared receiver

7 The remote control

8-9 Connection and preparation

8 Connecting the antenna

8 Connecting the television

8 Connecting the infrared receiver

9 Connecting the mains adapter

9 Inserting batteries in the remote control

10-13 Upgrading the television

10 Connecting the GRUNDIG television with G2 chassis (Digi 200)

11 Installing on the GRUNDIG television set

12-13 Operating the GRUNDIG television remote control

14-17 Basic settings

14 The menu

15-16 Searching for stations

17 Editing the station list

18-20 Basic functions

18 Switching on and off

18 Mode selection

18 Selecting preset channels

18 Using the options

19 Adjusting the volume

19 Muting the sound

19 Selecting stations from lists

19 Switching from the current station to the previous one

20 TV guide

21 Teletext mode

21 Teletext

21 Additional functions

22-27 Settings

22-23 Picture settings

23-24 Language Settings

25-26 Menu settings

26-27 General settings

ENGLISH

CONTENTS____________________________________________

28-31 Additional functions

28 Automatic station search

29 Manual station search

30 Timer functions

31 Safety

32-33 Special settings

32 Resetting the receiver to its original state

32 Updating the digital receiver software

33 Changing remote control levels

34-37 Information

34 Displaying station reception properties

34 Displaying device information

35 Technical data

35 Environmental note

36 Troubleshooting

37 Additional Information for units sold in the UK.

Packing contents

1DTR 1560-2 MICRO Digital Satellite Receiver

2Tele Pilot 766 S remote control

3Two batteries for the remote control (2 x 1.5 V, Mignon, e.g.

UM-3 or AA)

4Euro/AV (Scart) extension

5Mains adapter

6Infrared receiver

7Instruction Manual

Receiving digital stations

To use your new DTR 1560-2 MICRO digital receiver you need a

digital outdoor or indoor antenna.

Unlike analogue broadcasting, not every station has its own trans-

mission frequency. Instead, several stations are grouped into what

are known as bouquets on a regional or national level.

You can find the current transmission information on teletext from

various broadcasters, or look in a TV guide or on the Internet.

Special features of your digital receiver

The DTR 1560-2 MICRO digital receiver can receive and process

all unencrypted digital stations. This digital receiver has a built-in

digital receiver unit. The receiver unit converts the signals from

digital stations to provide outstanding audio and picture quality.

The TV guide tells you of any schedule changes at short notice, and

provides an overview of all the stations’ schedules for the next few

hours.

If the broadcaster provides it, you can call up detailed information

on each programme at the touch of a button.

This digital receiver has a very comprehensive, user-friendly menu

system.

The menu is displayed on the television screen, and the functions of

the remote control buttons are explained.

This receiver is prepared with the Digi 200 chassis for upgrading

GRUNDIG televisions.

The user guide for the receiver can be integrated into the television

user guide by following a brief installation procedure. The receiver

can be controlled with the television remote control once it is

installed. The remote control, the infra-red mouse and the power

supply for the receiver will then no longer be needed.

GENERAL INFORMATION__________________

ENGLISH

SET-UP AND SAFETY___________________________

To ensure that this high quality, easy-to-use digital receiver gives

you lasting entertainment and enjoyment, please note the following

information.

This digital receiver is designed to receive, record and play back

video and audio signals. Any other use is expressly prohibited.

When setting up the device, make sure the mains plug is easily

accessible.

If the digital receiver is subject to a sudden change in temperature,

for example when brought in from the cold to a warm room, let it

stand for at least two hours before you connect it to the mains

supply.

Do not expose the digital receiver to any moisture.

The digital receiver is designed for use in dry rooms. If you do use it

outdoors, please ensure that it is protected from moisture, such as

rain or splashing water.

Thunderstorms are a danger to all electrical devices. Even if the

digital receiver is switched off, it can be damaged by a

lightning strike to the mains or the antenna.

Always disconnect the mains and antenna plugs during a storm.

Never open the digital receiver casing under any circumstances.

Warranty claims are excluded for damage resulting from improper

handling.

Note:

Do not connect any other equipment while the device is switched

on. Switch off the other equipment as well before connecting it.

Only plug the device into the mains socket after you have connected

the external devices and the antenna.

°C2h

°C

AV1

AV2

TV R

The digital receiver

ÉÉSocket for the indoor or outdoor antenna.

IR remote Connection socket for the infrared receiver.

12 VDC, 6 W max. Connection socket for the mains adapter supplied.

EURO AV Euro AV (output) plug for the television.

The infrared receiver

The infrared receiver receives the infrared signals of the remote

control and forwards the commands by wire to the receiver. Position

the infrared receiver so that it can receive the remote control

commands.

When you switch on from standby, the receiver switches to the last

selected station (Last Station Memory).

•(red) The digital receiver is in standby mode.

•(green) The digital receiver is switched on.

OVERVIEW____________________________________________

ENGLISH

OVERVIEW____________________________________________

The remote control

ǼSwitches the digital receiver to standby, and from

standby to the channel last selected.

?Displays programme information.

1 … 0 Select stations.

dSwitches the sound to mute and on again.

iOpens the main menu.

zExits the current menu level.

ǸAdjust the volume.

P+ Switch channels up and down one by one.

P-

OK Calls up the station list.

Press

A/B

to switch between the station list and the

favourites list.

TXT Switches from television mode to teletext mode.

TV-G Calls up the TV guide.

Switches to TV mode.

A/B

Switches between the two most recently selected

channels.

RADIO Switches to radio mode.

ȄDisplays the time.

ǷǷSwitches between audio channels.

FCalls up options (not available for all stations).

DR, TV Switches to operating a GRUNDIG digital receiver,

DVD GRUNDIG television or GRUNDIG DVD player.

Keep the appropriate button (»DR«, »TV«, »DVD«)

pressed down. Then press the appropriate button.

Note:

The functions available depend on the model of the

device you are using.

Just try it out.

Tele Pilot 766 S

DR DVD

TXT

PIP

A/B

MHP

TV-G

Radio

Connecting the antenna

1Connect the cable of the indoor or outdoor antenna to the »ÉÉ« socket on

the digital receiver.

Note:

When connecting an indoor antenna you may have to try it out at

different positions until you get the best reception.

Connecting the television

1Plug the digital receiver into the corresponding Euro AV socket (e.g.

EURO-AV, SCART) of the television (use the Euro AV extension if

required).

CONNECTION AND PREPARATION

AV1

AV2

TV R

TelePilot765S

AVR DVD

TXT

PIP

A/B

MHP

TV-G

Radio

AV1

AV2

ENGLISH

Connecting the infrared receiver

1Insert the plug of the infrared receiver into the »IR remote« socket.

Connecting the mains adapter

1Plug the plug of the mains adapter supplied into the »12 VDC« socket on

the digital receiver.

2Plug the mains adapter into the socket.

Notes:

Only plug the device into the mains socket after you have connected the

television and the antenna.

The only way to disconnect the digital receiver from the mains supply is

to pull the plug.

Inserting batteries in the remote control

1Open the battery compartment by removing the lid.

2Insert the batteries (Mignon type, for example UM-3 or AA, 2x 1.5 V).

Observe the polarity (marked on the base of the battery compartment).

3Close the battery compartment.

Note:

If the digital receiver no longer reacts properly to remote control com-

mands, the batteries may be flat. Always remove used batteries.

The manufacturer accepts no liability for damage resulting from leaking

batteries.

Environmental note

Batteries, including those which contain no heavy metal, should not be

disposed of with household waste. Please dispose of used batteries in an

environmentally responsible manner. Find out about the legal regula-

tions which apply in your area.

CONNECTION AND PREPARATION

Connecting the GRUNDIG television with

G2 chassis (Digi 200)

You can fit a television with G2 chassis (Digi 200) with this digital

receiver as of software version “Ver SG21603-010 xxxxxx”.

“xxxxxx” stands for the date the software was created. The date is

not important for the compatibility. You can display the software

version of the television when »EASY DIALOG« is showing (main

menu), by pressing the green button.

Connecting the communication line to the receiver

1Plug the communication line into the »IR remote« and

»12 VDC« sockets.

Note:

The communication line is supplied with the appropriate tele-

vision.

Connecting the communication line to the

television

1Plug the communication line into the »SERVICE G-BUS«

socket on the television.

Note:

The remote control, the infra-red mouse and the power supply

for the receiver will then no longer be needed.

UPGRADING THE TELEVISION__________

DVI-I HDMI SERVICE

G-BUS

12 VDC, 18 W max.

Inhaltsverzeichnis

Andere Grundig Empfänger Handbücher

Grundig

Grundig DTR 2420 Bedienungsanleitung

Grundig

Grundig DTR 5464 HD Bedienungsanleitung

Grundig

Grundig Globe Traveler G3 Bedienungsanleitung

Grundig

Grundig SAT STC 1200 Bedienungsanleitung

Grundig

Grundig 400 PE Bedienungsanleitung

Grundig

Grundig YACHT BOY 400 Bedienungsanleitung

Grundig

Grundig M 100-CF Bedienungsanleitung

Grundig

Grundig DTR 1522 Bedienungsanleitung

Grundig

Grundig STR 400 AP Bedienungsanleitung

Grundig

Grundig OCEAN BOY 350 Bedienungsanleitung

Grundig

Grundig RR 740 CD Bedienungsanleitung

Grundig

Grundig SER 300 Bedienungsanleitung

Grundig

Grundig STR 6000 Bedienungsanleitung

Grundig

Grundig STR 7100 FR Bedienungsanleitung

Grundig

Grundig Satellit 500 Bedienungsanleitung

Grundig

Grundig Satellit 650 Bedienungsanleitung

Grundig

Grundig STC 316 Bedienungsanleitung

Grundig

Grundig STR 7100 Bedienungsanleitung

Grundig

Grundig STR 600 AP Bedienungsanleitung

Grundig

Grundig Yacht Boy 2000 Bedienungsanleitung

Grundig

Grundig WR 5408 PLL Bedienungsanleitung

Grundig

Grundig STE 1000 Bedienungsanleitung

Grundig

Grundig GSTB1701USB Bedienungsanleitung

Grundig

Grundig DTR 2000 S Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung